# Makefile.in generated by automake 1.15.1 from Makefile.am.
# @configure_input@

# Copyright (C) 1994-2017 Free Software Foundation, Inc.

# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@

#***************************************************************************
#                                  _   _ ____  _
#  Project                     ___| | | |  _ \| |
#                             / __| | | | |_) | |
#                            | (__| |_| |  _ <| |___
#                             \___|\___/|_| \_\_____|
#
# Copyright (C) 1998 - 2017, Daniel Stenberg, <daniel@haxx.se>, et al.
#
# This software is licensed as described in the file COPYING, which
# you should have received as part of this distribution. The terms
# are also available at https://curl.haxx.se/docs/copyright.html.
#
# You may opt to use, copy, modify, merge, publish, distribute and/or sell
# copies of the Software, and permit persons to whom the Software is
# furnished to do so, under the terms of the COPYING file.
#
# This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
# KIND, either express or implied.
#
###########################################################################

#***************************************************************************
#                                  _   _ ____  _
#  Project                     ___| | | |  _ \| |
#                             / __| | | | |_) | |
#                            | (__| |_| |  _ <| |___
#                             \___|\___/|_| \_\_____|
#
# Copyright (C) 1998 - 2018, Daniel Stenberg, <daniel@haxx.se>, et al.
#
# This software is licensed as described in the file COPYING, which
# you should have received as part of this distribution. The terms
# are also available at https://curl.haxx.se/docs/copyright.html.
#
# You may opt to use, copy, modify, merge, publish, distribute and/or sell
# copies of the Software, and permit persons to whom the Software is
# furnished to do so, under the terms of the COPYING file.
#
# This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
# KIND, either express or implied.
#
###########################################################################

# ./src/Makefile.inc
# Using the backslash as line continuation character might be problematic
# with some make flavours, as Watcom's wmake showed us already. If we
# ever want to change this in a portable manner then we should consider
# this idea (posted to the libcurl list by Adam Kellas):
# CSRC1 = file1.c file2.c file3.c
# CSRC2 = file4.c file5.c file6.c
# CSOURCES = $(CSRC1) $(CSRC2)


VPATH = @srcdir@
am__is_gnu_make = { \
  if test -z '$(MAKELEVEL)'; then \
    false; \
  elif test -n '$(MAKE_HOST)'; then \
    true; \
  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
    true; \
  else \
    false; \
  fi; \
}
am__make_running_with_option = \
  case $${target_option-} in \
      ?) ;; \
      *) echo "am__make_running_with_option: internal error: invalid" \
              "target option '$${target_option-}' specified" >&2; \
         exit 1;; \
  esac; \
  has_opt=no; \
  sane_makeflags=$$MAKEFLAGS; \
  if $(am__is_gnu_make); then \
    sane_makeflags=$$MFLAGS; \
  else \
    case $$MAKEFLAGS in \
      *\\[\ \	]*) \
        bs=\\; \
        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
    esac; \
  fi; \
  skip_next=no; \
  strip_trailopt () \
  { \
    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
  }; \
  for flg in $$sane_makeflags; do \
    test $$skip_next = yes && { skip_next=no; continue; }; \
    case $$flg in \
      *=*|--*) continue;; \
        -*I) strip_trailopt 'I'; skip_next=yes;; \
      -*I?*) strip_trailopt 'I';; \
        -*O) strip_trailopt 'O'; skip_next=yes;; \
      -*O?*) strip_trailopt 'O';; \
        -*l) strip_trailopt 'l'; skip_next=yes;; \
      -*l?*) strip_trailopt 'l';; \
      -[dEDm]) skip_next=yes;; \
      -[JT]) skip_next=yes;; \
    esac; \
    case $$flg in \
      *$$target_option*) has_opt=yes; break;; \
    esac; \
  done; \
  test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/ax_code_coverage.m4 \
	$(top_srcdir)/m4/curl-compilers.m4 \
	$(top_srcdir)/m4/curl-confopts.m4 \
	$(top_srcdir)/m4/curl-functions.m4 \
	$(top_srcdir)/m4/curl-openssl.m4 \
	$(top_srcdir)/m4/curl-override.m4 \
	$(top_srcdir)/m4/curl-reentrant.m4 $(top_srcdir)/m4/libtool.m4 \
	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
	$(top_srcdir)/m4/xc-am-iface.m4 \
	$(top_srcdir)/m4/xc-cc-check.m4 \
	$(top_srcdir)/m4/xc-lt-iface.m4 \
	$(top_srcdir)/m4/xc-translit.m4 \
	$(top_srcdir)/m4/xc-val-flgs.m4 \
	$(top_srcdir)/m4/zz40-xc-ovr.m4 \
	$(top_srcdir)/m4/zz50-xc-ovr.m4 \
	$(top_srcdir)/m4/zz60-xc-ovr.m4 $(top_srcdir)/acinclude.m4 \
	$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
	$(am__configure_deps) $(am__DIST_COMMON)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
 configure.lineno config.status.lineno
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/lib/curl_config.h
CONFIG_CLEAN_FILES = curl-config libcurl.pc
CONFIG_CLEAN_VPATH_FILES =
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
  for p in $$list; do echo "$$p $$p"; done | \
  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
    if (++n[$$2] == $(am__install_max)) \
      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
    END { for (dir in files) print dir, files[dir] }'
am__base_list = \
  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__uninstall_files_from_dir = { \
  test -z "$$files" \
    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
         $(am__cd) "$$dir" && rm -f $$files; }; \
  }
am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(pkgconfigdir)"
SCRIPTS = $(bin_SCRIPTS)
AM_V_P = $(am__v_P_@AM_V@)
am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_@AM_V@)
am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
am__v_GEN_0 = @echo "  GEN     " $@;
am__v_GEN_1 = 
AM_V_at = $(am__v_at_@AM_V@)
am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
am__v_at_0 = @
am__v_at_1 = 
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
	ctags-recursive dvi-recursive html-recursive info-recursive \
	install-data-recursive install-dvi-recursive \
	install-exec-recursive install-html-recursive \
	install-info-recursive install-pdf-recursive \
	install-ps-recursive install-recursive installcheck-recursive \
	installdirs-recursive pdf-recursive ps-recursive \
	tags-recursive uninstall-recursive
am__can_run_installinfo = \
  case $$AM_UPDATE_INFO_DIR in \
    n|no|NO) false;; \
    *) (install-info --version) >/dev/null 2>&1;; \
  esac
DATA = $(pkgconfig_DATA)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
  distclean-recursive maintainer-clean-recursive
am__recursive_targets = \
  $(RECURSIVE_TARGETS) \
  $(RECURSIVE_CLEAN_TARGETS) \
  $(am__extra_recursive_targets)
AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
	cscope distdir dist dist-all distcheck
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
# Read a list of newline-separated strings from the standard input,
# and print each of them once, without duplicates.  Input order is
# *not* preserved.
am__uniquify_input = $(AWK) '\
  BEGIN { nonempty = 0; } \
  { items[$$0] = 1; nonempty = 1; } \
  END { if (nonempty) { for (i in items) print i; }; } \
'
# Make sure the list of sources is unique.  This is necessary because,
# e.g., the same source file might be shared among _SOURCES variables
# for different programs/libraries.
am__define_uniq_tagged_files = \
  list='$(am__tagged_files)'; \
  unique=`for i in $$list; do \
    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
  done | $(am__uniquify_input)`
ETAGS = etags
CTAGS = ctags
CSCOPE = cscope
am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/curl-config.in \
	$(srcdir)/lib/Makefile.inc $(srcdir)/libcurl.pc.in \
	$(srcdir)/src/Makefile.inc COPYING README compile config.guess \
	config.sub depcomp install-sh ltmain.sh missing
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
am__remove_distdir = \
  if test -d "$(distdir)"; then \
    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
      && rm -rf "$(distdir)" \
      || { sleep 5 && rm -rf "$(distdir)"; }; \
  else :; fi
am__post_remove_distdir = $(am__remove_distdir)
am__relativize = \
  dir0=`pwd`; \
  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
  sed_rest='s,^[^/]*/*,,'; \
  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
  sed_butlast='s,/*[^/]*$$,,'; \
  while test -n "$$dir1"; do \
    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
    if test "$$first" != "."; then \
      if test "$$first" = ".."; then \
        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
      else \
        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
        if test "$$first2" = "$$first"; then \
          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
        else \
          dir2="../$$dir2"; \
        fi; \
        dir0="$$dir0"/"$$first"; \
      fi; \
    fi; \
    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
  done; \
  reldir="$$dir2"
DIST_ARCHIVES = $(distdir).tar.gz
GZIP_ENV = --best
DIST_TARGETS = dist-gzip
distuninstallcheck_listfiles = find . -type f -print
am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
distcleancheck_listfiles = find . -type f -print
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AR = @AR@
AS = @AS@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
BLANK_AT_MAKETIME = @BLANK_AT_MAKETIME@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CFLAG_CURL_SYMBOL_HIDING = @CFLAG_CURL_SYMBOL_HIDING@
CODE_COVERAGE_CFLAGS = @CODE_COVERAGE_CFLAGS@
CODE_COVERAGE_CPPFLAGS = @CODE_COVERAGE_CPPFLAGS@
CODE_COVERAGE_CXXFLAGS = @CODE_COVERAGE_CXXFLAGS@
CODE_COVERAGE_ENABLED = @CODE_COVERAGE_ENABLED@
CODE_COVERAGE_LDFLAGS = @CODE_COVERAGE_LDFLAGS@
CODE_COVERAGE_LIBS = @CODE_COVERAGE_LIBS@
CONFIGURE_OPTIONS = @CONFIGURE_OPTIONS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CPPFLAG_CURL_STATICLIB = @CPPFLAG_CURL_STATICLIB@
CURLVERSION = @CURLVERSION@
CURL_CA_BUNDLE = @CURL_CA_BUNDLE@
CURL_CFLAG_EXTRAS = @CURL_CFLAG_EXTRAS@
CURL_DISABLE_DICT = @CURL_DISABLE_DICT@
CURL_DISABLE_FILE = @CURL_DISABLE_FILE@
CURL_DISABLE_FTP = @CURL_DISABLE_FTP@
CURL_DISABLE_GOPHER = @CURL_DISABLE_GOPHER@
CURL_DISABLE_HTTP = @CURL_DISABLE_HTTP@
CURL_DISABLE_IMAP = @CURL_DISABLE_IMAP@
CURL_DISABLE_LDAP = @CURL_DISABLE_LDAP@
CURL_DISABLE_LDAPS = @CURL_DISABLE_LDAPS@
CURL_DISABLE_POP3 = @CURL_DISABLE_POP3@
CURL_DISABLE_PROXY = @CURL_DISABLE_PROXY@
CURL_DISABLE_RTSP = @CURL_DISABLE_RTSP@
CURL_DISABLE_SMB = @CURL_DISABLE_SMB@
CURL_DISABLE_SMTP = @CURL_DISABLE_SMTP@
CURL_DISABLE_TELNET = @CURL_DISABLE_TELNET@
CURL_DISABLE_TFTP = @CURL_DISABLE_TFTP@
CURL_LT_SHLIB_VERSIONED_FLAVOUR = @CURL_LT_SHLIB_VERSIONED_FLAVOUR@
CURL_NETWORK_AND_TIME_LIBS = @CURL_NETWORK_AND_TIME_LIBS@
CURL_NETWORK_LIBS = @CURL_NETWORK_LIBS@
CURL_WITH_MULTI_SSL = @CURL_WITH_MULTI_SSL@
CYGPATH_W = @CYGPATH_W@
DEFAULT_SSL_BACKEND = @DEFAULT_SSL_BACKEND@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DLLTOOL = @DLLTOOL@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
ENABLE_SHARED = @ENABLE_SHARED@
ENABLE_STATIC = @ENABLE_STATIC@
EXEEXT = @EXEEXT@
FGREP = @FGREP@
GCOV = @GCOV@
GENHTML = @GENHTML@
GREP = @GREP@
HAVE_BROTLI = @HAVE_BROTLI@
HAVE_GNUTLS_SRP = @HAVE_GNUTLS_SRP@
HAVE_LDAP_SSL = @HAVE_LDAP_SSL@
HAVE_LIBZ = @HAVE_LIBZ@
HAVE_OPENSSL_SRP = @HAVE_OPENSSL_SRP@
IDN_ENABLED = @IDN_ENABLED@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
IPV6_ENABLED = @IPV6_ENABLED@
LCOV = @LCOV@
LD = @LD@
LDFLAGS = @LDFLAGS@
LIBCURL_LIBS = @LIBCURL_LIBS@
LIBMETALINK_CPPFLAGS = @LIBMETALINK_CPPFLAGS@
LIBMETALINK_LDFLAGS = @LIBMETALINK_LDFLAGS@
LIBMETALINK_LIBS = @LIBMETALINK_LIBS@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
MANOPT = @MANOPT@
MKDIR_P = @MKDIR_P@
NM = @NM@
NMEDIT = @NMEDIT@
NROFF = @NROFF@
NSS_LIBS = @NSS_LIBS@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PERL = @PERL@
PKGADD_NAME = @PKGADD_NAME@
PKGADD_PKG = @PKGADD_PKG@
PKGADD_VENDOR = @PKGADD_VENDOR@
PKGCONFIG = @PKGCONFIG@
RANDOM_FILE = @RANDOM_FILE@
RANLIB = @RANLIB@
REQUIRE_LIB_DEPS = @REQUIRE_LIB_DEPS@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
SSL_BACKENDS = @SSL_BACKENDS@
SSL_ENABLED = @SSL_ENABLED@
SSL_LIBS = @SSL_LIBS@
STRIP = @STRIP@
SUPPORT_FEATURES = @SUPPORT_FEATURES@
SUPPORT_PROTOCOLS = @SUPPORT_PROTOCOLS@
USE_ARES = @USE_ARES@
USE_AXTLS = @USE_AXTLS@
USE_CYASSL = @USE_CYASSL@
USE_DARWINSSL = @USE_DARWINSSL@
USE_GNUTLS = @USE_GNUTLS@
USE_GNUTLS_NETTLE = @USE_GNUTLS_NETTLE@
USE_LIBRTMP = @USE_LIBRTMP@
USE_LIBSSH = @USE_LIBSSH@
USE_LIBSSH2 = @USE_LIBSSH2@
USE_MBEDTLS = @USE_MBEDTLS@
USE_NGHTTP2 = @USE_NGHTTP2@
USE_NSS = @USE_NSS@
USE_OPENLDAP = @USE_OPENLDAP@
USE_POLARSSL = @USE_POLARSSL@
USE_SCHANNEL = @USE_SCHANNEL@
USE_UNIX_SOCKETS = @USE_UNIX_SOCKETS@
USE_WINDOWS_SSPI = @USE_WINDOWS_SSPI@
VERSION = @VERSION@
VERSIONNUM = @VERSIONNUM@
ZLIB_LIBS = @ZLIB_LIBS@
ZSH_FUNCTIONS_DIR = @ZSH_FUNCTIONS_DIR@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
libext = @libext@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
runstatedir = @runstatedir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
subdirs = @subdirs@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
AUTOMAKE_OPTIONS = foreign
ACLOCAL_AMFLAGS = -I m4
CMAKE_DIST = CMakeLists.txt CMake/CMakeConfigurableFile.in      \
 CMake/CurlTests.c CMake/FindGSS.cmake CMake/OtherTests.cmake   \
 CMake/Platforms/WindowsCache.cmake CMake/Utilities.cmake       \
 CMake/Macros.cmake              \
 CMake/CurlSymbolHiding.cmake CMake/FindCARES.cmake             \
 CMake/FindLibSSH2.cmake CMake/FindNGHTTP2.cmake                \
 CMake/FindMbedTLS.cmake CMake/cmake_uninstall.cmake.in         \
 CMake/curl-config.cmake

VC6_LIBTMPL = projects/Windows/VC6/lib/libcurl.tmpl
VC6_LIBDSP = projects/Windows/VC6/lib/libcurl.dsp.dist
VC6_LIBDSP_DEPS = $(VC6_LIBTMPL) Makefile.am lib/Makefile.inc
VC6_SRCTMPL = projects/Windows/VC6/src/curl.tmpl
VC6_SRCDSP = projects/Windows/VC6/src/curl.dsp.dist
VC6_SRCDSP_DEPS = $(VC6_SRCTMPL) Makefile.am src/Makefile.inc
VC7_LIBTMPL = projects/Windows/VC7/lib/libcurl.tmpl
VC7_LIBVCPROJ = projects/Windows/VC7/lib/libcurl.vcproj.dist
VC7_LIBVCPROJ_DEPS = $(VC7_LIBTMPL) Makefile.am lib/Makefile.inc
VC7_SRCTMPL = projects/Windows/VC7/src/curl.tmpl
VC7_SRCVCPROJ = projects/Windows/VC7/src/curl.vcproj.dist
VC7_SRCVCPROJ_DEPS = $(VC7_SRCTMPL) Makefile.am src/Makefile.inc
VC71_LIBTMPL = projects/Windows/VC7.1/lib/libcurl.tmpl
VC71_LIBVCPROJ = projects/Windows/VC7.1/lib/libcurl.vcproj.dist
VC71_LIBVCPROJ_DEPS = $(VC71_LIBTMPL) Makefile.am lib/Makefile.inc
VC71_SRCTMPL = projects/Windows/VC7.1/src/curl.tmpl
VC71_SRCVCPROJ = projects/Windows/VC7.1/src/curl.vcproj.dist
VC71_SRCVCPROJ_DEPS = $(VC71_SRCTMPL) Makefile.am src/Makefile.inc
VC8_LIBTMPL = projects/Windows/VC8/lib/libcurl.tmpl
VC8_LIBVCPROJ = projects/Windows/VC8/lib/libcurl.vcproj.dist
VC8_LIBVCPROJ_DEPS = $(VC8_LIBTMPL) Makefile.am lib/Makefile.inc
VC8_SRCTMPL = projects/Windows/VC8/src/curl.tmpl
VC8_SRCVCPROJ = projects/Windows/VC8/src/curl.vcproj.dist
VC8_SRCVCPROJ_DEPS = $(VC8_SRCTMPL) Makefile.am src/Makefile.inc
VC9_LIBTMPL = projects/Windows/VC9/lib/libcurl.tmpl
VC9_LIBVCPROJ = projects/Windows/VC9/lib/libcurl.vcproj.dist
VC9_LIBVCPROJ_DEPS = $(VC9_LIBTMPL) Makefile.am lib/Makefile.inc
VC9_SRCTMPL = projects/Windows/VC9/src/curl.tmpl
VC9_SRCVCPROJ = projects/Windows/VC9/src/curl.vcproj.dist
VC9_SRCVCPROJ_DEPS = $(VC9_SRCTMPL) Makefile.am src/Makefile.inc
VC10_LIBTMPL = projects/Windows/VC10/lib/libcurl.tmpl
VC10_LIBVCXPROJ = projects/Windows/VC10/lib/libcurl.vcxproj.dist
VC10_LIBVCXPROJ_DEPS = $(VC10_LIBTMPL) Makefile.am lib/Makefile.inc
VC10_SRCTMPL = projects/Windows/VC10/src/curl.tmpl
VC10_SRCVCXPROJ = projects/Windows/VC10/src/curl.vcxproj.dist
VC10_SRCVCXPROJ_DEPS = $(VC10_SRCTMPL) Makefile.am src/Makefile.inc
VC11_LIBTMPL = projects/Windows/VC11/lib/libcurl.tmpl
VC11_LIBVCXPROJ = projects/Windows/VC11/lib/libcurl.vcxproj.dist
VC11_LIBVCXPROJ_DEPS = $(VC11_LIBTMPL) Makefile.am lib/Makefile.inc
VC11_SRCTMPL = projects/Windows/VC11/src/curl.tmpl
VC11_SRCVCXPROJ = projects/Windows/VC11/src/curl.vcxproj.dist
VC11_SRCVCXPROJ_DEPS = $(VC11_SRCTMPL) Makefile.am src/Makefile.inc
VC12_LIBTMPL = projects/Windows/VC12/lib/libcurl.tmpl
VC12_LIBVCXPROJ = projects/Windows/VC12/lib/libcurl.vcxproj.dist
VC12_LIBVCXPROJ_DEPS = $(VC12_LIBTMPL) Makefile.am lib/Makefile.inc
VC12_SRCTMPL = projects/Windows/VC12/src/curl.tmpl
VC12_SRCVCXPROJ = projects/Windows/VC12/src/curl.vcxproj.dist
VC12_SRCVCXPROJ_DEPS = $(VC12_SRCTMPL) Makefile.am src/Makefile.inc
VC14_LIBTMPL = projects/Windows/VC14/lib/libcurl.tmpl
VC14_LIBVCXPROJ = projects/Windows/VC14/lib/libcurl.vcxproj.dist
VC14_LIBVCXPROJ_DEPS = $(VC14_LIBTMPL) Makefile.am lib/Makefile.inc
VC14_SRCTMPL = projects/Windows/VC14/src/curl.tmpl
VC14_SRCVCXPROJ = projects/Windows/VC14/src/curl.vcxproj.dist
VC14_SRCVCXPROJ_DEPS = $(VC14_SRCTMPL) Makefile.am src/Makefile.inc
VC15_LIBTMPL = projects/Windows/VC15/lib/libcurl.tmpl
VC15_LIBVCXPROJ = projects/Windows/VC15/lib/libcurl.vcxproj.dist
VC15_LIBVCXPROJ_DEPS = $(VC15_LIBTMPL) Makefile.am lib/Makefile.inc
VC15_SRCTMPL = projects/Windows/VC15/src/curl.tmpl
VC15_SRCVCXPROJ = projects/Windows/VC15/src/curl.vcxproj.dist
VC15_SRCVCXPROJ_DEPS = $(VC15_SRCTMPL) Makefile.am src/Makefile.inc
VC_DIST = projects/README                           \
 projects/build-openssl.bat                         \
 projects/build-wolfssl.bat                         \
 projects/checksrc.bat                              \
 projects/Windows/VC6/curl-all.dsw                  \
 projects/Windows/VC6/lib/libcurl.dsw               \
 projects/Windows/VC6/src/curl.dsw                  \
 projects/Windows/VC7/curl-all.sln                  \
 projects/Windows/VC7/lib/libcurl.sln               \
 projects/Windows/VC7/src/curl.sln                  \
 projects/Windows/VC7.1/curl-all.sln                \
 projects/Windows/VC7.1/lib/libcurl.sln             \
 projects/Windows/VC7.1/src/curl.sln                \
 projects/Windows/VC8/curl-all.sln                  \
 projects/Windows/VC8/lib/libcurl.sln               \
 projects/Windows/VC8/src/curl.sln                  \
 projects/Windows/VC9/curl-all.sln                  \
 projects/Windows/VC9/lib/libcurl.sln               \
 projects/Windows/VC9/src/curl.sln                  \
 projects/Windows/VC10/curl-all.sln                 \
 projects/Windows/VC10/lib/libcurl.sln              \
 projects/Windows/VC10/lib/libcurl.vcxproj.filters  \
 projects/Windows/VC10/src/curl.sln                 \
 projects/Windows/VC10/src/curl.vcxproj.filters     \
 projects/Windows/VC11/curl-all.sln                 \
 projects/Windows/VC11/lib/libcurl.sln              \
 projects/Windows/VC11/lib/libcurl.vcxproj.filters  \
 projects/Windows/VC11/src/curl.sln                 \
 projects/Windows/VC11/src/curl.vcxproj.filters     \
 projects/Windows/VC12/curl-all.sln                 \
 projects/Windows/VC12/lib/libcurl.sln              \
 projects/Windows/VC12/lib/libcurl.vcxproj.filters  \
 projects/Windows/VC12/src/curl.sln                 \
 projects/Windows/VC12/src/curl.vcxproj.filters     \
 projects/Windows/VC14/curl-all.sln                 \
 projects/Windows/VC14/lib/libcurl.sln              \
 projects/Windows/VC14/lib/libcurl.vcxproj.filters  \
 projects/Windows/VC14/src/curl.sln                 \
 projects/Windows/VC14/src/curl.vcxproj.filters     \
 projects/Windows/VC15/curl-all.sln                 \
 projects/Windows/VC15/lib/libcurl.sln              \
 projects/Windows/VC15/lib/libcurl.vcxproj.filters  \
 projects/Windows/VC15/src/curl.sln                 \
 projects/Windows/VC15/src/curl.vcxproj.filters     \
 projects/generate.bat                              \
 projects/wolfssl_options.h                         \
 projects/wolfssl_override.props

WINBUILD_DIST = winbuild/BUILD.WINDOWS.txt winbuild/gen_resp_file.bat	\
 winbuild/MakefileBuild.vc winbuild/Makefile.vc

EXTRA_DIST = CHANGES COPYING maketgz Makefile.dist curl-config.in	\
 RELEASE-NOTES buildconf libcurl.pc.in MacOSX-Framework scripts/zsh.pl	\
 scripts/updatemanpages.pl $(CMAKE_DIST) $(VC_DIST) $(WINBUILD_DIST)	\
 lib/libcurl.vers.in buildconf.bat scripts/coverage.sh

CLEANFILES = $(VC6_LIBDSP) $(VC6_SRCDSP) $(VC7_LIBVCPROJ) $(VC7_SRCVCPROJ)	\
 $(VC71_LIBVCPROJ) $(VC71_SRCVCPROJ) $(VC8_LIBVCPROJ) $(VC8_SRCVCPROJ)	\
 $(VC9_LIBVCPROJ) $(VC9_SRCVCPROJ) $(VC10_LIBVCXPROJ) $(VC10_SRCVCXPROJ)	\
 $(VC11_LIBVCXPROJ) $(VC11_SRCVCXPROJ) $(VC12_LIBVCXPROJ) $(VC12_SRCVCXPROJ)	\
 $(VC14_LIBVCXPROJ) $(VC14_SRCVCXPROJ) $(VC15_LIBVCXPROJ) $(VC15_SRCVCXPROJ)

bin_SCRIPTS = curl-config
SUBDIRS = lib src
DIST_SUBDIRS = $(SUBDIRS) tests packages scripts include docs
pkgconfigdir = $(libdir)/pkgconfig
pkgconfig_DATA = libcurl.pc
LIB_VAUTH_CFILES = vauth/vauth.c vauth/cleartext.c vauth/cram.c         \
  vauth/digest.c vauth/digest_sspi.c vauth/krb5_gssapi.c                \
  vauth/krb5_sspi.c vauth/ntlm.c vauth/ntlm_sspi.c vauth/oauth2.c       \
  vauth/spnego_gssapi.c vauth/spnego_sspi.c

LIB_VAUTH_HFILES = vauth/vauth.h vauth/digest.h vauth/ntlm.h
LIB_VTLS_CFILES = vtls/openssl.c vtls/gtls.c vtls/vtls.c vtls/nss.c     \
  vtls/polarssl.c vtls/polarssl_threadlock.c vtls/axtls.c               \
  vtls/cyassl.c vtls/schannel.c vtls/schannel_verify.c                  \
  vtls/darwinssl.c vtls/gskit.c vtls/mbedtls.c

LIB_VTLS_HFILES = vtls/openssl.h vtls/vtls.h vtls/gtls.h                \
  vtls/nssg.h vtls/polarssl.h vtls/polarssl_threadlock.h vtls/axtls.h   \
  vtls/cyassl.h vtls/schannel.h vtls/darwinssl.h vtls/gskit.h           \
  vtls/mbedtls.h

LIB_CFILES = file.c timeval.c base64.c hostip.c progress.c formdata.c   \
  cookie.c http.c sendf.c ftp.c url.c dict.c if2ip.c speedcheck.c       \
  ldap.c version.c getenv.c escape.c mprintf.c telnet.c netrc.c         \
  getinfo.c transfer.c strcase.c easy.c security.c curl_fnmatch.c       \
  fileinfo.c ftplistparser.c wildcard.c krb5.c memdebug.c http_chunks.c \
  strtok.c connect.c llist.c hash.c multi.c content_encoding.c share.c  \
  http_digest.c md4.c md5.c http_negotiate.c inet_pton.c strtoofft.c    \
  strerror.c amigaos.c hostasyn.c hostip4.c hostip6.c hostsyn.c         \
  inet_ntop.c parsedate.c select.c tftp.c splay.c strdup.c socks.c      \
  ssh.c ssh-libssh.c curl_addrinfo.c socks_gssapi.c socks_sspi.c        \
  curl_sspi.c slist.c nonblock.c curl_memrchr.c imap.c pop3.c smtp.c    \
  pingpong.c rtsp.c curl_threads.c warnless.c hmac.c curl_rtmp.c        \
  openldap.c curl_gethostname.c gopher.c idn_win32.c                    \
  http_proxy.c non-ascii.c asyn-ares.c asyn-thread.c curl_gssapi.c      \
  http_ntlm.c curl_ntlm_wb.c curl_ntlm_core.c curl_sasl.c rand.c        \
  curl_multibyte.c hostcheck.c conncache.c pipeline.c dotdot.c          \
  x509asn1.c http2.c smb.c curl_endian.c curl_des.c system_win32.c      \
  mime.c sha256.c setopt.c curl_path.c curl_ctype.c curl_range.c

LIB_HFILES = arpa_telnet.h netrc.h file.h timeval.h hostip.h progress.h \
  formdata.h cookie.h http.h sendf.h ftp.h url.h dict.h if2ip.h         \
  speedcheck.h urldata.h curl_ldap.h escape.h telnet.h getinfo.h        \
  strcase.h curl_sec.h memdebug.h http_chunks.h curl_fnmatch.h          \
  wildcard.h fileinfo.h ftplistparser.h strtok.h connect.h llist.h      \
  hash.h content_encoding.h share.h curl_md4.h curl_md5.h http_digest.h \
  http_negotiate.h inet_pton.h amigaos.h strtoofft.h strerror.h         \
  inet_ntop.h curlx.h curl_memory.h curl_setup.h transfer.h select.h    \
  easyif.h multiif.h parsedate.h tftp.h sockaddr.h splay.h strdup.h     \
  socks.h ssh.h curl_base64.h curl_addrinfo.h curl_sspi.h      \
  slist.h nonblock.h curl_memrchr.h imap.h pop3.h smtp.h pingpong.h     \
  rtsp.h curl_threads.h warnless.h curl_hmac.h curl_rtmp.h              \
  curl_gethostname.h gopher.h http_proxy.h non-ascii.h asyn.h           \
  http_ntlm.h curl_gssapi.h curl_ntlm_wb.h curl_ntlm_core.h             \
  curl_sasl.h curl_multibyte.h hostcheck.h conncache.h                  \
  curl_setup_once.h multihandle.h setup-vms.h pipeline.h dotdot.h       \
  x509asn1.h http2.h sigpipe.h smb.h curl_endian.h curl_des.h           \
  curl_printf.h system_win32.h rand.h mime.h curl_sha256.h setopt.h     \
  curl_path.h curl_ctype.h curl_range.h

LIB_RCFILES = libcurl.rc
CSOURCES = $(LIB_CFILES) $(LIB_VAUTH_CFILES) $(LIB_VTLS_CFILES)
HHEADERS = $(LIB_HFILES) $(LIB_VAUTH_HFILES) $(LIB_VTLS_HFILES)

# libcurl has sources that provide functions named curlx_* that aren't part of
# the official API, but we re-use the code here to avoid duplication.
CURLX_CFILES = \
	../lib/strtoofft.c \
	../lib/nonblock.c \
	../lib/warnless.c \
        ../lib/curl_ctype.c

CURLX_HFILES = \
	../lib/curl_setup.h \
	../lib/strtoofft.h \
	../lib/nonblock.h \
	../lib/warnless.h \
        ../lib/curl_ctype.h

CURL_CFILES = \
	slist_wc.c \
	tool_binmode.c \
	tool_bname.c \
	tool_cb_dbg.c \
	tool_cb_hdr.c \
	tool_cb_prg.c \
	tool_cb_rea.c \
	tool_cb_see.c \
	tool_cb_wrt.c \
	tool_cfgable.c \
	tool_convert.c \
	tool_dirhie.c \
	tool_doswin.c \
	tool_easysrc.c \
	tool_filetime.c \
	tool_formparse.c \
	tool_getparam.c \
	tool_getpass.c \
	tool_help.c \
	tool_helpers.c \
	tool_homedir.c \
	tool_hugehelp.c \
	tool_libinfo.c \
	tool_main.c \
	tool_metalink.c \
	tool_msgs.c \
	tool_operate.c \
	tool_operhlp.c \
	tool_panykey.c \
	tool_paramhlp.c \
	tool_parsecfg.c \
	tool_strdup.c \
	tool_setopt.c \
	tool_sleep.c \
	tool_urlglob.c \
	tool_util.c \
	tool_vms.c \
	tool_writeout.c \
	tool_xattr.c

CURL_HFILES = \
	slist_wc.h \
	tool_binmode.h \
	tool_bname.h \
	tool_cb_dbg.h \
	tool_cb_hdr.h \
	tool_cb_prg.h \
	tool_cb_rea.h \
	tool_cb_see.h \
	tool_cb_wrt.h \
	tool_cfgable.h \
	tool_convert.h \
	tool_dirhie.h \
	tool_doswin.h \
	tool_easysrc.h \
	tool_filetime.h \
	tool_formparse.h \
	tool_getparam.h \
	tool_getpass.h \
	tool_help.h \
	tool_helpers.h \
	tool_homedir.h \
	tool_hugehelp.h \
	tool_libinfo.h \
	tool_main.h \
	tool_metalink.h \
	tool_msgs.h \
	tool_operate.h \
	tool_operhlp.h \
	tool_panykey.h \
	tool_paramhlp.h \
	tool_parsecfg.h \
	tool_sdecls.h \
	tool_setopt.h \
	tool_setup.h \
	tool_sleep.h \
	tool_strdup.h \
	tool_urlglob.h \
	tool_util.h \
	tool_version.h \
	tool_vms.h \
	tool_writeout.h \
	tool_xattr.h

CURL_RCFILES = curl.rc

# curl_SOURCES is special and gets assigned in src/Makefile.am
CURL_FILES = $(CURL_CFILES) $(CURLX_CFILES) $(CURL_HFILES)
all: all-recursive

.SUFFIXES:
am--refresh: Makefile
	@:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(srcdir)/lib/Makefile.inc $(srcdir)/src/Makefile.inc $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --foreign Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    echo ' $(SHELL) ./config.status'; \
	    $(SHELL) ./config.status;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
	esac;
$(srcdir)/lib/Makefile.inc $(srcdir)/src/Makefile.inc $(am__empty):

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	$(SHELL) ./config.status --recheck

$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
	$(am__cd) $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
$(am__aclocal_m4_deps):
curl-config: $(top_builddir)/config.status $(srcdir)/curl-config.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
libcurl.pc: $(top_builddir)/config.status $(srcdir)/libcurl.pc.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
install-binSCRIPTS: $(bin_SCRIPTS)
	@$(NORMAL_INSTALL)
	@list='$(bin_SCRIPTS)'; test -n "$(bindir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
	done | \
	sed -e 'p;s,.*/,,;n' \
	    -e 'h;s|.*|.|' \
	    -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
	    if ($$2 == $$4) { files[d] = files[d] " " $$1; \
	      if (++n[d] == $(am__install_max)) { \
		print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
	    else { print "f", d "/" $$4, $$1 } } \
	  END { for (d in files) print "f", d, files[d] }' | \
	while read type dir files; do \
	     if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
	     test -z "$$files" || { \
	       echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(bindir)$$dir'"; \
	       $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
	     } \
	; done

uninstall-binSCRIPTS:
	@$(NORMAL_UNINSTALL)
	@list='$(bin_SCRIPTS)'; test -n "$(bindir)" || exit 0; \
	files=`for p in $$list; do echo "$$p"; done | \
	       sed -e 's,.*/,,;$(transform)'`; \
	dir='$(DESTDIR)$(bindir)'; $(am__uninstall_files_from_dir)

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

distclean-libtool:
	-rm -f libtool config.lt
install-pkgconfigDATA: $(pkgconfig_DATA)
	@$(NORMAL_INSTALL)
	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
	done

uninstall-pkgconfigDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir)

# This directory's subdirectories are mostly independent; you can cd
# into them and run 'make' without going through this Makefile.
# To change the values of 'make' variables: instead of editing Makefiles,
# (1) if the variable is set in 'config.status', edit 'config.status'
#     (which will cause the Makefiles to be regenerated when you run 'make');
# (2) otherwise, pass the desired values on the 'make' command line.
$(am__recursive_targets):
	@fail=; \
	if $(am__make_keepgoing); then \
	  failcom='fail=yes'; \
	else \
	  failcom='exit 1'; \
	fi; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	case "$@" in \
	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
	  *) list='$(SUBDIRS)' ;; \
	esac; \
	for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

ID: $(am__tagged_files)
	$(am__define_uniq_tagged_files); mkid -fID $$unique
tags: tags-recursive
TAGS: tags

tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
	set x; \
	here=`pwd`; \
	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
	  include_option=--etags-include; \
	  empty_fix=.; \
	else \
	  include_option=--include; \
	  empty_fix=; \
	fi; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test ! -f $$subdir/TAGS || \
	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
	  fi; \
	done; \
	$(am__define_uniq_tagged_files); \
	shift; \
	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  if test $$# -gt 0; then \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      "$$@" $$unique; \
	  else \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      $$unique; \
	  fi; \
	fi
ctags: ctags-recursive

CTAGS: ctags
ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
	$(am__define_uniq_tagged_files); \
	test -z "$(CTAGS_ARGS)$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && $(am__cd) $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) "$$here"
cscope: cscope.files
	test ! -s cscope.files \
	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
clean-cscope:
	-rm -f cscope.files
cscope.files: clean-cscope cscopelist
cscopelist: cscopelist-recursive

cscopelist-am: $(am__tagged_files)
	list='$(am__tagged_files)'; \
	case "$(srcdir)" in \
	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
	  *) sdir=$(subdir)/$(srcdir) ;; \
	esac; \
	for i in $$list; do \
	  if test -f "$$i"; then \
	    echo "$(subdir)/$$i"; \
	  else \
	    echo "$$sdir/$$i"; \
	  fi; \
	done >> $(top_builddir)/cscope.files

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files

distdir: $(DISTFILES)
	$(am__remove_distdir)
	test -d "$(distdir)" || mkdir "$(distdir)"
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d "$(distdir)/$$file"; then \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
	  else \
	    test -f "$(distdir)/$$file" \
	    || cp -p $$d/$$file "$(distdir)/$$file" \
	    || exit 1; \
	  fi; \
	done
	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    $(am__make_dryrun) \
	      || test -d "$(distdir)/$$subdir" \
	      || $(MKDIR_P) "$(distdir)/$$subdir" \
	      || exit 1; \
	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
	    $(am__relativize); \
	    new_distdir=$$reldir; \
	    dir1=$$subdir; dir2="$(top_distdir)"; \
	    $(am__relativize); \
	    new_top_distdir=$$reldir; \
	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
	    ($(am__cd) $$subdir && \
	      $(MAKE) $(AM_MAKEFLAGS) \
	        top_distdir="$$new_top_distdir" \
	        distdir="$$new_distdir" \
		am__remove_distdir=: \
		am__skip_length_check=: \
		am__skip_mode_fix=: \
	        distdir) \
	      || exit 1; \
	  fi; \
	done
	$(MAKE) $(AM_MAKEFLAGS) \
	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
	  dist-hook
	-test -n "$(am__skip_mode_fix)" \
	|| find "$(distdir)" -type d ! -perm -755 \
		-exec chmod u+rwx,go+rx {} \; -o \
	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
	|| chmod -R a+r "$(distdir)"
dist-gzip: distdir
	tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz
	$(am__post_remove_distdir)

dist-bzip2: distdir
	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
	$(am__post_remove_distdir)

dist-lzip: distdir
	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
	$(am__post_remove_distdir)

dist-xz: distdir
	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
	$(am__post_remove_distdir)

dist-tarZ: distdir
	@echo WARNING: "Support for distribution archives compressed with" \
		       "legacy program 'compress' is deprecated." >&2
	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
	$(am__post_remove_distdir)

dist-shar: distdir
	@echo WARNING: "Support for shar distribution archives is" \
	               "deprecated." >&2
	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
	shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz
	$(am__post_remove_distdir)

dist-zip: distdir
	-rm -f $(distdir).zip
	zip -rq $(distdir).zip $(distdir)
	$(am__post_remove_distdir)

dist dist-all:
	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
	$(am__post_remove_distdir)

# This target untars the dist file and tries a VPATH configuration.  Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
	case '$(DIST_ARCHIVES)' in \
	*.tar.gz*) \
	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\
	*.tar.bz2*) \
	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
	*.tar.lz*) \
	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
	*.tar.xz*) \
	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
	*.tar.Z*) \
	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
	*.shar.gz*) \
	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\
	*.zip*) \
	  unzip $(distdir).zip ;;\
	esac
	chmod -R a-w $(distdir)
	chmod u+w $(distdir)
	mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
	chmod a-w $(distdir)
	test -d $(distdir)/_build || exit 0; \
	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
	  && am__cwd=`pwd` \
	  && $(am__cd) $(distdir)/_build/sub \
	  && ../../configure \
	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
	    $(DISTCHECK_CONFIGURE_FLAGS) \
	    --srcdir=../.. --prefix="$$dc_install_base" \
	  && $(MAKE) $(AM_MAKEFLAGS) \
	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
	  && $(MAKE) $(AM_MAKEFLAGS) check \
	  && $(MAKE) $(AM_MAKEFLAGS) install \
	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
	        distuninstallcheck \
	  && chmod -R a-w "$$dc_install_base" \
	  && ({ \
	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
	  && rm -rf "$$dc_destdir" \
	  && $(MAKE) $(AM_MAKEFLAGS) dist \
	  && rm -rf $(DIST_ARCHIVES) \
	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
	  && cd "$$am__cwd" \
	  || exit 1
	$(am__post_remove_distdir)
	@(echo "$(distdir) archives ready for distribution: "; \
	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
distuninstallcheck:
	@test -n '$(distuninstallcheck_dir)' || { \
	  echo 'ERROR: trying to run $@ with an empty' \
	       '$$(distuninstallcheck_dir)' >&2; \
	  exit 1; \
	}; \
	$(am__cd) '$(distuninstallcheck_dir)' || { \
	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
	  exit 1; \
	}; \
	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
	   || { echo "ERROR: files left after uninstall:" ; \
	        if test -n "$(DESTDIR)"; then \
	          echo "  (check DESTDIR support)"; \
	        fi ; \
	        $(distuninstallcheck_listfiles) ; \
	        exit 1; } >&2
distcleancheck: distclean
	@if test '$(srcdir)' = . ; then \
	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
	  exit 1 ; \
	fi
	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
	  || { echo "ERROR: files left in build directory after distclean:" ; \
	       $(distcleancheck_listfiles) ; \
	       exit 1; } >&2
check-am: all-am
check: check-recursive
all-am: Makefile $(SCRIPTS) $(DATA)
installdirs: installdirs-recursive
installdirs-am:
	for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(pkgconfigdir)"; do \
	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
	done
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
	if test -z '$(STRIP)'; then \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	      install; \
	else \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
	fi
mostlyclean-generic:

clean-generic:
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive

clean-am: clean-generic clean-libtool mostlyclean-am

distclean: distclean-recursive
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-libtool \
	distclean-tags

dvi: dvi-recursive

dvi-am:

html-am:

info: info-recursive

info-am:

install-data-am: install-pkgconfigDATA
	@$(NORMAL_INSTALL)
	$(MAKE) $(AM_MAKEFLAGS) install-data-hook
install-dvi: install-dvi-recursive

install-dvi-am:

install-exec-am: install-binSCRIPTS

install-html: install-html-recursive

install-html-am:

install-info: install-info-recursive

install-info-am:

install-man:

install-pdf: install-pdf-recursive

install-pdf-am:

install-ps: install-ps-recursive

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-recursive
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -rf $(top_srcdir)/autom4te.cache
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

pdf-am:

ps: ps-recursive

ps-am:

uninstall-am: uninstall-binSCRIPTS uninstall-pkgconfigDATA
	@$(NORMAL_INSTALL)
	$(MAKE) $(AM_MAKEFLAGS) uninstall-hook
.MAKE: $(am__recursive_targets) install-am install-data-am \
	install-strip uninstall-am

.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
	am--refresh check check-am clean clean-cscope clean-generic \
	clean-libtool cscope cscopelist-am ctags ctags-am dist \
	dist-all dist-bzip2 dist-gzip dist-hook dist-lzip dist-shar \
	dist-tarZ dist-xz dist-zip distcheck distclean \
	distclean-generic distclean-libtool distclean-tags \
	distcleancheck distdir distuninstallcheck dvi dvi-am html \
	html-am info info-am install install-am install-binSCRIPTS \
	install-data install-data-am install-data-hook install-dvi \
	install-dvi-am install-exec install-exec-am install-html \
	install-html-am install-info install-info-am install-man \
	install-pdf install-pdf-am install-pkgconfigDATA install-ps \
	install-ps-am install-strip installcheck installcheck-am \
	installdirs installdirs-am maintainer-clean \
	maintainer-clean-generic mostlyclean mostlyclean-generic \
	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
	uninstall-am uninstall-binSCRIPTS uninstall-hook \
	uninstall-pkgconfigDATA

.PRECIOUS: Makefile


# List of files required to generate VC IDE .dsp, .vcproj and .vcxproj files

dist-hook:
	rm -rf $(top_builddir)/tests/log
	find $(distdir) -name "*.dist" -exec rm {} \;
	(distit=`find $(srcdir) -name "*.dist" | grep -v ./ares/`; \
	for file in $$distit; do \
	  strip=`echo $$file | sed -e s/^$(srcdir)// -e s/\.dist//`; \
	  cp -p $$file $(distdir)$$strip; \
	done)

html:
	cd docs && $(MAKE) html

pdf:
	cd docs && $(MAKE) pdf

check: test examples check-docs

@CROSSCOMPILING_TRUE@test-full: test
@CROSSCOMPILING_TRUE@test-torture: test

@CROSSCOMPILING_TRUE@test:
@CROSSCOMPILING_TRUE@	@echo "NOTICE: we can't run the tests when cross-compiling!"

@CROSSCOMPILING_FALSE@test:
@CROSSCOMPILING_FALSE@	@(cd tests; $(MAKE) all quiet-test)

@CROSSCOMPILING_FALSE@test-full:
@CROSSCOMPILING_FALSE@	@(cd tests; $(MAKE) all full-test)

@CROSSCOMPILING_FALSE@test-nonflaky:
@CROSSCOMPILING_FALSE@	@(cd tests; $(MAKE) all nonflaky-test)

@CROSSCOMPILING_FALSE@test-torture:
@CROSSCOMPILING_FALSE@	@(cd tests; $(MAKE) all torture-test)

@CROSSCOMPILING_FALSE@test-event:
@CROSSCOMPILING_FALSE@	@(cd tests; $(MAKE) all event-test)

@CROSSCOMPILING_FALSE@test-am:
@CROSSCOMPILING_FALSE@	@(cd tests; $(MAKE) all am-test)

examples:
	@(cd docs/examples; $(MAKE) check)

check-docs:
	@(cd docs/libcurl; $(MAKE) check)

# Build source and binary rpms. For rpm-3.0 and above, the ~/.rpmmacros
# must contain the following line:
# %_topdir /home/loic/local/rpm
# and that /home/loic/local/rpm contains the directory SOURCES, BUILD etc.
#
# cd /home/loic/local/rpm ; mkdir -p SOURCES BUILD RPMS/i386 SPECS SRPMS
#
# If additional configure flags are needed to build the package, add the
# following in ~/.rpmmacros
# %configure CFLAGS="%{optflags}" ./configure %{_target_platform} --prefix=%{_prefix} ${AM_CONFIGFLAGS}
# and run make rpm in the following way:
# AM_CONFIGFLAGS='--with-uri=/home/users/loic/local/RedHat-6.2' make rpm
#

rpms:
	$(MAKE) RPMDIST=curl rpm
	$(MAKE) RPMDIST=curl-ssl rpm

rpm:
	RPM_TOPDIR=`rpm --showrc | $(PERL) -n -e 'print if(s/.*_topdir\s+(.*)/$$1/)'` ; \
	cp $(srcdir)/packages/Linux/RPM/$(RPMDIST).spec $$RPM_TOPDIR/SPECS ; \
	cp $(PACKAGE)-$(VERSION).tar.gz $$RPM_TOPDIR/SOURCES ; \
	rpm -ba --clean --rmsource $$RPM_TOPDIR/SPECS/$(RPMDIST).spec ; \
	mv $$RPM_TOPDIR/RPMS/i386/$(RPMDIST)-*.rpm . ; \
	mv $$RPM_TOPDIR/SRPMS/$(RPMDIST)-*.src.rpm .

#
# Build a Solaris pkgadd format file
# run 'make pkgadd' once you've done './configure' and 'make' to make a Solaris pkgadd format
# file (which ends up back in this directory).
# The pkgadd file is in 'pkgtrans' format, so to install on Solaris, do
# pkgadd -d ./HAXXcurl-*
#

# gak - libtool requires an absolute directory, hence the pwd below...
pkgadd:
	umask 022 ; \
	$(MAKE) install DESTDIR=`/bin/pwd`/packages/Solaris/root ; \
	cat COPYING > $(srcdir)/packages/Solaris/copyright ; \
	cd $(srcdir)/packages/Solaris && $(MAKE) package

#
# Build a cygwin binary tarball installation file
# resulting .tar.bz2 file will end up at packages/Win32/cygwin
cygwinbin:
	$(MAKE) -C packages/Win32/cygwin cygwinbin

# We extend the standard install with a custom hook:
install-data-hook:
	cd include && $(MAKE) install
	cd docs && $(MAKE) install
	cd docs/libcurl && $(MAKE) install

# We extend the standard uninstall with a custom hook:
uninstall-hook:
	cd include && $(MAKE) uninstall
	cd docs && $(MAKE) uninstall
	cd docs/libcurl && $(MAKE) uninstall

ca-bundle: lib/mk-ca-bundle.pl
	@echo "generating a fresh ca-bundle.crt"
	@perl $< -b -l -u lib/ca-bundle.crt

ca-firefox: lib/firefox-db2pem.sh
	@echo "generating a fresh ca-bundle.crt"
	./lib/firefox-db2pem.sh lib/ca-bundle.crt

checksrc:
	cd lib && $(MAKE) checksrc
	cd src && $(MAKE) checksrc
	cd tests && $(MAKE) checksrc
	cd include/curl && $(MAKE) checksrc
	cd docs/examples && $(MAKE) checksrc

.PHONY: vc-ide

vc-ide: $(VC6_LIBDSP_DEPS) $(VC6_SRCDSP_DEPS) $(VC7_LIBVCPROJ_DEPS)	\
 $(VC7_SRCVCPROJ_DEPS) $(VC71_LIBVCPROJ_DEPS) $(VC71_SRCVCPROJ_DEPS)	\
 $(VC8_LIBVCPROJ_DEPS) $(VC8_SRCVCPROJ_DEPS) $(VC9_LIBVCPROJ_DEPS)	\
 $(VC9_SRCVCPROJ_DEPS) $(VC10_LIBVCXPROJ_DEPS) $(VC10_SRCVCXPROJ_DEPS)	\
 $(VC11_LIBVCXPROJ_DEPS) $(VC11_SRCVCXPROJ_DEPS) $(VC12_LIBVCXPROJ_DEPS)	\
 $(VC12_SRCVCXPROJ_DEPS) $(VC14_LIBVCXPROJ_DEPS) $(VC14_SRCVCXPROJ_DEPS)	\
 $(VC15_LIBVCXPROJ_DEPS) $(VC15_SRCVCXPROJ_DEPS)
	@(win32_lib_srcs='$(LIB_CFILES)'; \
	win32_lib_hdrs='$(LIB_HFILES) config-win32.h'; \
	win32_lib_rc='$(LIB_RCFILES)'; \
	win32_lib_vauth_srcs='$(LIB_VAUTH_CFILES)'; \
	win32_lib_vauth_hdrs='$(LIB_VAUTH_HFILES)'; \
	win32_lib_vtls_srcs='$(LIB_VTLS_CFILES)'; \
	win32_lib_vtls_hdrs='$(LIB_VTLS_HFILES)'; \
	win32_src_srcs='$(CURL_CFILES)'; \
	win32_src_hdrs='$(CURL_HFILES)'; \
	win32_src_rc='$(CURL_RCFILES)'; \
	win32_src_x_srcs='$(CURLX_CFILES)'; \
	win32_src_x_hdrs='$(CURLX_HFILES) ../lib/config-win32.h'; \
	\
	sorted_lib_srcs=`for file in $$win32_lib_srcs; do echo $$file; done | sort`; \
	sorted_lib_hdrs=`for file in $$win32_lib_hdrs; do echo $$file; done | sort`; \
	sorted_lib_vauth_srcs=`for file in $$win32_lib_vauth_srcs; do echo $$file; done | sort`; \
	sorted_lib_vauth_hdrs=`for file in $$win32_lib_vauth_hdrs; do echo $$file; done | sort`; \
	sorted_lib_vtls_srcs=`for file in $$win32_lib_vtls_srcs; do echo $$file; done | sort`; \
	sorted_lib_vtls_hdrs=`for file in $$win32_lib_vtls_hdrs; do echo $$file; done | sort`; \
	sorted_src_srcs=`for file in $$win32_src_srcs; do echo $$file; done | sort`; \
	sorted_src_hdrs=`for file in $$win32_src_hdrs; do echo $$file; done | sort`; \
	sorted_src_x_srcs=`for file in $$win32_src_x_srcs; do echo $$file; done | sort`; \
	sorted_src_x_hdrs=`for file in $$win32_src_x_hdrs; do echo $$file; done | sort`; \
	\
	awk_code='\
function gen_element(type, dir, file)\
{\
  sub(/vauth\//, "", file);\
  sub(/vtls\//, "", file);\
\
  spaces="    ";\
  if(dir == "lib\\vauth" || dir == "lib\\vtls")\
    tabs="				";\
  else\
    tabs="			";\
\
  if(type == "dsp") {\
    printf("# Begin Source File\r\n");\
    printf("\r\n");\
    printf("SOURCE=..\\..\\..\\..\\%s\\%s\r\n", dir, file);\
    printf("# End Source File\r\n");\
  }\
  else if(type == "vcproj1") {\
    printf("%s<File\r\n", tabs);\
    printf("%s	RelativePath=\"..\\..\\..\\..\\%s\\%s\">\r\n",\
           tabs, dir, file);\
    printf("%s</File>\r\n", tabs);\
  }\
  else if(type == "vcproj2") {\
    printf("%s<File\r\n", tabs);\
    printf("%s	RelativePath=\"..\\..\\..\\..\\%s\\%s\"\r\n",\
           tabs, dir, file);\
    printf("%s>\r\n", tabs);\
    printf("%s</File>\r\n", tabs);\
  }\
  else if(type == "vcxproj") {\
    i = index(file, ".");\
    ext = substr(file, i == 0 ? 0 : i + 1);\
\
    if(ext == "c")\
      printf("%s<ClCompile Include=\"..\\..\\..\\..\\%s\\%s\" />\r\n",\
             spaces, dir, file);\
    else if(ext == "h")\
      printf("%s<ClInclude Include=\"..\\..\\..\\..\\%s\\%s\" />\r\n",\
             spaces, dir, file);\
    else if(ext == "rc")\
      printf("%s<ResourceCompile Include=\"..\\..\\..\\..\\%s\\%s\" />\r\n",\
      spaces, dir, file);\
  }\
}\
\
{\
\
  if($$0 == "CURL_LIB_C_FILES") {\
    split(lib_srcs, arr);\
    for(val in arr) gen_element(proj_type, "lib", arr[val]);\
  }\
  else if($$0 == "CURL_LIB_H_FILES") {\
    split(lib_hdrs, arr);\
    for(val in arr) gen_element(proj_type, "lib", arr[val]);\
  }\
  else if($$0 == "CURL_LIB_RC_FILES") {\
    split(lib_rc, arr);\
    for(val in arr) gen_element(proj_type, "lib", arr[val]);\
  }\
  else if($$0 == "CURL_LIB_VAUTH_C_FILES") {\
    split(lib_vauth_srcs, arr);\
    for(val in arr) gen_element(proj_type, "lib\\vauth", arr[val]);\
  }\
  else if($$0 == "CURL_LIB_VAUTH_H_FILES") {\
    split(lib_vauth_hdrs, arr);\
    for(val in arr) gen_element(proj_type, "lib\\vauth", arr[val]);\
  }\
  else if($$0 == "CURL_LIB_VTLS_C_FILES") {\
    split(lib_vtls_srcs, arr);\
    for(val in arr) gen_element(proj_type, "lib\\vtls", arr[val]);\
  }\
  else if($$0 == "CURL_LIB_VTLS_H_FILES") {\
    split(lib_vtls_hdrs, arr);\
    for(val in arr) gen_element(proj_type, "lib\\vtls", arr[val]);\
  }\
  else if($$0 == "CURL_SRC_C_FILES") {\
    split(src_srcs, arr);\
    for(val in arr) gen_element(proj_type, "src", arr[val]);\
  }\
  else if($$0 == "CURL_SRC_H_FILES") {\
    split(src_hdrs, arr);\
    for(val in arr) gen_element(proj_type, "src", arr[val]);\
  }\
  else if($$0 == "CURL_SRC_RC_FILES") {\
    split(src_rc, arr);\
    for(val in arr) gen_element(proj_type, "src", arr[val]);\
  }\
  else if($$0 == "CURL_SRC_X_C_FILES") {\
    split(src_x_srcs, arr);\
    for(val in arr) {\
      sub(/..\/lib\//, "", arr[val]);\
      gen_element(proj_type, "lib", arr[val]);\
    }\
  }\
  else if($$0 == "CURL_SRC_X_H_FILES") {\
    split(src_x_hdrs, arr);\
    for(val in arr) {\
      sub(/..\/lib\//, "", arr[val]);\
      gen_element(proj_type, "lib", arr[val]);\
    }\
  }\
  else\
    printf("%s\r\n", $$0);\
}';\
	\
	echo "generating '$(VC6_LIBDSP)'"; \
	awk -v proj_type=dsp \
		-v lib_srcs="$$sorted_lib_srcs" \
		-v lib_hdrs="$$sorted_lib_hdrs" \
		-v lib_rc="$$win32_lib_rc" \
		-v lib_vauth_srcs="$$sorted_lib_vauth_srcs" \
		-v lib_vauth_hdrs="$$sorted_lib_vauth_hdrs" \
		-v lib_vtls_srcs="$$sorted_lib_vtls_srcs" \
		-v lib_vtls_hdrs="$$sorted_lib_vtls_hdrs" \
		"$$awk_code" $(srcdir)/$(VC6_LIBTMPL) > $(VC6_LIBDSP) || { exit 1; }; \
	\
	echo "generating '$(VC6_SRCDSP)'"; \
	awk -v proj_type=dsp \
		-v src_srcs="$$sorted_src_srcs" \
		-v src_hdrs="$$sorted_src_hdrs" \
		-v src_rc="$$win32_src_rc" \
		-v src_x_srcs="$$sorted_src_x_srcs" \
		-v src_x_hdrs="$$sorted_src_x_hdrs" \
		"$$awk_code" $(srcdir)/$(VC6_SRCTMPL) > $(VC6_SRCDSP) || { exit 1; }; \
	\
	echo "generating '$(VC7_LIBVCPROJ)'"; \
	awk -v proj_type=vcproj1 \
		-v lib_srcs="$$sorted_lib_srcs" \
		-v lib_hdrs="$$sorted_lib_hdrs" \
		-v lib_rc="$$win32_lib_rc" \
		-v lib_vauth_srcs="$$sorted_lib_vauth_srcs" \
		-v lib_vauth_hdrs="$$sorted_lib_vauth_hdrs" \
		-v lib_vtls_srcs="$$sorted_lib_vtls_srcs" \
		-v lib_vtls_hdrs="$$sorted_lib_vtls_hdrs" \
		"$$awk_code" $(srcdir)/$(VC7_LIBTMPL) > $(VC7_LIBVCPROJ) || { exit 1; }; \
	\
	echo "generating '$(VC7_SRCVCPROJ)'"; \
	awk -v proj_type=vcproj1 \
		-v src_srcs="$$sorted_src_srcs" \
		-v src_hdrs="$$sorted_src_hdrs" \
		-v src_rc="$$win32_src_rc" \
		-v src_x_srcs="$$sorted_src_x_srcs" \
		-v src_x_hdrs="$$sorted_src_x_hdrs" \
		"$$awk_code" $(srcdir)/$(VC7_SRCTMPL) > $(VC7_SRCVCPROJ) || { exit 1; }; \
	\
	echo "generating '$(VC71_LIBVCPROJ)'"; \
	awk -v proj_type=vcproj1 \
		-v lib_srcs="$$sorted_lib_srcs" \
		-v lib_hdrs="$$sorted_lib_hdrs" \
		-v lib_rc="$$win32_lib_rc" \
		-v lib_vauth_srcs="$$sorted_lib_vauth_srcs" \
		-v lib_vauth_hdrs="$$sorted_lib_vauth_hdrs" \
		-v lib_vtls_srcs="$$sorted_lib_vtls_srcs" \
		-v lib_vtls_hdrs="$$sorted_lib_vtls_hdrs" \
		"$$awk_code" $(srcdir)/$(VC71_LIBTMPL) > $(VC71_LIBVCPROJ) || { exit 1; }; \
	\
	echo "generating '$(VC71_SRCVCPROJ)'"; \
	awk -v proj_type=vcproj1 \
		-v src_srcs="$$sorted_src_srcs" \
		-v src_hdrs="$$sorted_src_hdrs" \
		-v src_rc="$$win32_src_rc" \
		-v src_x_srcs="$$sorted_src_x_srcs" \
		-v src_x_hdrs="$$sorted_src_x_hdrs" \
		"$$awk_code" $(srcdir)/$(VC71_SRCTMPL) > $(VC71_SRCVCPROJ) || { exit 1; }; \
	\
	echo "generating '$(VC8_LIBVCPROJ)'"; \
	awk -v proj_type=vcproj2 \
		-v lib_srcs="$$sorted_lib_srcs" \
		-v lib_hdrs="$$sorted_lib_hdrs" \
		-v lib_rc="$$win32_lib_rc" \
		-v lib_vauth_srcs="$$sorted_lib_vauth_srcs" \
		-v lib_vauth_hdrs="$$sorted_lib_vauth_hdrs" \
		-v lib_vtls_srcs="$$sorted_lib_vtls_srcs" \
		-v lib_vtls_hdrs="$$sorted_lib_vtls_hdrs" \
		"$$awk_code" $(srcdir)/$(VC8_LIBTMPL) > $(VC8_LIBVCPROJ) || { exit 1; }; \
	\
	echo "generating '$(VC8_SRCVCPROJ)'"; \
	awk -v proj_type=vcproj2 \
		-v src_srcs="$$sorted_src_srcs" \
		-v src_hdrs="$$sorted_src_hdrs" \
		-v src_rc="$$win32_src_rc" \
		-v src_x_srcs="$$sorted_src_x_srcs" \
		-v src_x_hdrs="$$sorted_src_x_hdrs" \
		"$$awk_code" $(srcdir)/$(VC8_SRCTMPL) > $(VC8_SRCVCPROJ) || { exit 1; }; \
	\
	echo "generating '$(VC9_LIBVCPROJ)'"; \
	awk -v proj_type=vcproj2 \
		-v lib_srcs="$$sorted_lib_srcs" \
		-v lib_hdrs="$$sorted_lib_hdrs" \
		-v lib_rc="$$win32_lib_rc" \
		-v lib_vauth_srcs="$$sorted_lib_vauth_srcs" \
		-v lib_vauth_hdrs="$$sorted_lib_vauth_hdrs" \
		-v lib_vtls_srcs="$$sorted_lib_vtls_srcs" \
		-v lib_vtls_hdrs="$$sorted_lib_vtls_hdrs" \
		"$$awk_code" $(srcdir)/$(VC9_LIBTMPL) > $(VC9_LIBVCPROJ) || { exit 1; }; \
	\
	echo "generating '$(VC9_SRCVCPROJ)'"; \
	awk -v proj_type=vcproj2 \
		-v src_srcs="$$sorted_src_srcs" \
		-v src_hdrs="$$sorted_src_hdrs" \
		-v src_rc="$$win32_src_rc" \
		-v src_x_srcs="$$sorted_src_x_srcs" \
		-v src_x_hdrs="$$sorted_src_x_hdrs" \
		"$$awk_code" $(srcdir)/$(VC9_SRCTMPL) > $(VC9_SRCVCPROJ) || { exit 1; }; \
	\
	echo "generating '$(VC10_LIBVCXPROJ)'"; \
	awk -v proj_type=vcxproj \
		-v lib_srcs="$$sorted_lib_srcs" \
		-v lib_hdrs="$$sorted_lib_hdrs" \
		-v lib_rc="$$win32_lib_rc" \
		-v lib_vauth_srcs="$$sorted_lib_vauth_srcs" \
		-v lib_vauth_hdrs="$$sorted_lib_vauth_hdrs" \
		-v lib_vtls_srcs="$$sorted_lib_vtls_srcs" \
		-v lib_vtls_hdrs="$$sorted_lib_vtls_hdrs" \
		"$$awk_code" $(srcdir)/$(VC10_LIBTMPL) > $(VC10_LIBVCXPROJ) || { exit 1; }; \
	\
	echo "generating '$(VC10_SRCVCXPROJ)'"; \
	awk -v proj_type=vcxproj \
		-v src_srcs="$$sorted_src_srcs" \
		-v src_hdrs="$$sorted_src_hdrs" \
		-v src_rc="$$win32_src_rc" \
		-v src_x_srcs="$$sorted_src_x_srcs" \
		-v src_x_hdrs="$$sorted_src_x_hdrs" \
		"$$awk_code" $(srcdir)/$(VC10_SRCTMPL) > $(VC10_SRCVCXPROJ) || { exit 1; }; \
	\
	echo "generating '$(VC11_LIBVCXPROJ)'"; \
	awk -v proj_type=vcxproj \
		-v lib_srcs="$$sorted_lib_srcs" \
		-v lib_hdrs="$$sorted_lib_hdrs" \
		-v lib_rc="$$win32_lib_rc" \
		-v lib_vauth_srcs="$$sorted_lib_vauth_srcs" \
		-v lib_vauth_hdrs="$$sorted_lib_vauth_hdrs" \
		-v lib_vtls_srcs="$$sorted_lib_vtls_srcs" \
		-v lib_vtls_hdrs="$$sorted_lib_vtls_hdrs" \
		"$$awk_code" $(srcdir)/$(VC11_LIBTMPL) > $(VC11_LIBVCXPROJ) || { exit 1; }; \
	\
	echo "generating '$(VC11_SRCVCXPROJ)'"; \
	awk -v proj_type=vcxproj \
		-v src_srcs="$$sorted_src_srcs" \
		-v src_hdrs="$$sorted_src_hdrs" \
		-v src_rc="$$win32_src_rc" \
		-v src_x_srcs="$$sorted_src_x_srcs" \
		-v src_x_hdrs="$$sorted_src_x_hdrs" \
		"$$awk_code" $(srcdir)/$(VC11_SRCTMPL) > $(VC11_SRCVCXPROJ) || { exit 1; }; \
	\
	echo "generating '$(VC12_LIBVCXPROJ)'"; \
	awk -v proj_type=vcxproj \
		-v lib_srcs="$$sorted_lib_srcs" \
		-v lib_hdrs="$$sorted_lib_hdrs" \
		-v lib_rc="$$win32_lib_rc" \
		-v lib_vauth_srcs="$$sorted_lib_vauth_srcs" \
		-v lib_vauth_hdrs="$$sorted_lib_vauth_hdrs" \
		-v lib_vtls_srcs="$$sorted_lib_vtls_srcs" \
		-v lib_vtls_hdrs="$$sorted_lib_vtls_hdrs" \
		"$$awk_code" $(srcdir)/$(VC12_LIBTMPL) > $(VC12_LIBVCXPROJ) || { exit 1; }; \
	\
	echo "generating '$(VC12_SRCVCXPROJ)'"; \
	awk -v proj_type=vcxproj \
		-v src_srcs="$$sorted_src_srcs" \
		-v src_hdrs="$$sorted_src_hdrs" \
		-v src_rc="$$win32_src_rc" \
		-v src_x_srcs="$$sorted_src_x_srcs" \
		-v src_x_hdrs="$$sorted_src_x_hdrs" \
		"$$awk_code" $(srcdir)/$(VC12_SRCTMPL) > $(VC12_SRCVCXPROJ) || { exit 1; }; \
	\
	echo "generating '$(VC14_LIBVCXPROJ)'"; \
	awk -v proj_type=vcxproj \
		-v lib_srcs="$$sorted_lib_srcs" \
		-v lib_hdrs="$$sorted_lib_hdrs" \
		-v lib_rc="$$win32_lib_rc" \
		-v lib_vauth_srcs="$$sorted_lib_vauth_srcs" \
		-v lib_vauth_hdrs="$$sorted_lib_vauth_hdrs" \
		-v lib_vtls_srcs="$$sorted_lib_vtls_srcs" \
		-v lib_vtls_hdrs="$$sorted_lib_vtls_hdrs" \
		"$$awk_code" $(srcdir)/$(VC14_LIBTMPL) > $(VC14_LIBVCXPROJ) || { exit 1; }; \
	\
	echo "generating '$(VC14_SRCVCXPROJ)'"; \
	awk -v proj_type=vcxproj \
		-v src_srcs="$$sorted_src_srcs" \
		-v src_hdrs="$$sorted_src_hdrs" \
		-v src_rc="$$win32_src_rc" \
		-v src_x_srcs="$$sorted_src_x_srcs" \
		-v src_x_hdrs="$$sorted_src_x_hdrs" \
		"$$awk_code" $(srcdir)/$(VC14_SRCTMPL) > $(VC14_SRCVCXPROJ) || { exit 1; }; \
	\
	echo "generating '$(VC15_LIBVCXPROJ)'"; \
	awk -v proj_type=vcxproj \
		-v lib_srcs="$$sorted_lib_srcs" \
		-v lib_hdrs="$$sorted_lib_hdrs" \
		-v lib_rc="$$win32_lib_rc" \
		-v lib_vauth_srcs="$$sorted_lib_vauth_srcs" \
		-v lib_vauth_hdrs="$$sorted_lib_vauth_hdrs" \
		-v lib_vtls_srcs="$$sorted_lib_vtls_srcs" \
		-v lib_vtls_hdrs="$$sorted_lib_vtls_hdrs" \
		"$$awk_code" $(srcdir)/$(VC15_LIBTMPL) > $(VC15_LIBVCXPROJ) || { exit 1; }; \
	\
	echo "generating '$(VC15_SRCVCXPROJ)'"; \
	awk -v proj_type=vcxproj \
		-v src_srcs="$$sorted_src_srcs" \
		-v src_hdrs="$$sorted_src_hdrs" \
		-v src_rc="$$win32_src_rc" \
		-v src_x_srcs="$$sorted_src_x_srcs" \
		-v src_x_hdrs="$$sorted_src_x_hdrs" \
		"$$awk_code" $(srcdir)/$(VC15_SRCTMPL) > $(VC15_SRCVCXPROJ) || { exit 1; };)

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
