#: bin/quilt.in:48
msgid "Usage: quilt [--trace[=verbose]] [--quiltrc=XX] command [-h] ..."
msgstr ""

#: bin/quilt.in:49
msgid "       quilt --version"
msgstr ""

#: bin/quilt.in:51
msgid "Commands are:"
msgstr ""

#: bin/quilt.in:56
msgid ""
"\n"
"Global options:\n"
"\n"
"--trace\n"
"\tRuns the command in bash trace mode (-x). For internal debugging.\n"
"\n"
"--quiltrc file\n"
"\tUse the specified configuration file instead of ~/.quiltrc (or\n"
"\t%s/quilt.quiltrc if ~/.quiltrc does not exist).  See the pdf\n"
"\tdocumentation for details about its possible contents.  The\n"
"\tspecial value \\\"-\\\" causes quilt not to read any configuration\n"
"\tfile.\n"
"\n"
"--version\n"
"\tPrint the version number and exit immediately.\\n"
msgstr ""

#: quilt/add.in:22
msgid "Usage: quilt add [-P patch] {file} ...\\n"
msgstr ""

#: quilt/add.in:25
msgid ""
"\n"
"Add one or more files to the topmost or named patch.  Files must be\n"
"added to the patch before being modified.  Files that are modified by\n"
"patches already applied on top of the specified patch cannot be added.\n"
"\n"
"-P patch\n"
"\tPatch to add files to.\n"
msgstr ""

#: quilt/add.in:48 quilt/add.in:54
msgid "File %s is located below %s\\n"
msgstr ""

#: quilt/add.in:103
msgid "File %s is already in patch %s\\n"
msgstr ""

#: quilt/add.in:111 quilt/remove.in:82 quilt/revert.in:84
msgid "File %s modified by patch %s\\n"
msgstr ""

#: quilt/add.in:119
msgid "Cannot add symbolic link %s\\n"
msgstr ""

#: quilt/add.in:126
msgid "Failed to back up file %s\\n"
msgstr ""

#: quilt/add.in:137
msgid "File %s added to patch %s\\n"
msgstr ""

#: quilt/annotate.in:22
msgid "Usage: quilt annotate [-P patch] {file}\\n"
msgstr ""

#: quilt/annotate.in:25
msgid ""
"\n"
"Print an annotated listing of the specified file showing which\n"
"patches modify which lines. Only applied patches are included.\n"
"\n"
"-P patch\n"
"\tStop checking for changes at the specified rather than the\n"
"\ttopmost patch.\n"
msgstr ""

#: quilt/applied.in:22
msgid "Usage: quilt applied [patch]\\n"
msgstr ""

#: quilt/applied.in:25
msgid ""
"\n"
"Print a list of applied patches, or all patches up to and including the\n"
"specified patch in the file series.\n"
msgstr ""

#: quilt/delete.in:22
msgid "Usage: quilt delete [-r] [--backup] [patch|-n]\\n"
msgstr ""

#: quilt/delete.in:25
msgid ""
"\n"
"Remove the specified or topmost patch from the series file.  If the\n"
"patch is applied, quilt will attempt to remove it first. (Only the\n"
"topmost patch can be removed right now.)\n"
"\n"
"-n\tDelete the next patch after topmost, rather than the specified\n"
"\tor topmost patch.\n"
"\n"
"-r\tRemove the deleted patch file from the patches directory as well.\n"
"\n"
"--backup\n"
"\tRename the patch file to patch~ rather than deleting it.\n"
"\tIgnored if not used with \\`-r'.\n"
msgstr ""

#: quilt/delete.in:89
msgid "No next patch\\n"
msgstr ""

#: quilt/delete.in:102 quilt/scripts/patchfns.in:607
msgid "Patch %s is currently applied\\n"
msgstr ""

#: quilt/delete.in:114
msgid "Removed patch %s\\n"
msgstr ""

#: quilt/delete.in:116
msgid "Failed to remove patch %s\\n"
msgstr ""

#: quilt/delete.in:127
msgid "Failed to backup patch file %s\\n"
msgstr ""

#: quilt/delete.in:134
msgid "Failed to remove patch file %s\\n"
msgstr ""

#: quilt/diff.in:24
msgid ""
"Usage: quilt diff [-p n|-p ab] [-u|-U num|-c|-C num] [--combine patch|-z] [-"
"R] [-P patch] [--snapshot] [--diff=utility] [--no-timestamps] [--no-index] "
"[--sort] [--color[=always|auto|never]] [file ...]\\n"
msgstr ""

#: quilt/diff.in:28
msgid ""
"\n"
"Produces a diff of the specified file(s) in the topmost or specified\n"
"patch.  If no files are specified, all files that are modified are\n"
"included.\n"
"\n"
"-p n\tCreate a -p n style patch (-p0 or -p1 are supported).\n"
"\n"
"-p ab\tCreate a -p1 style patch, but use a/file and b/file as the\n"
"\toriginal and new filenames instead of the default\n"
"\tdir.orig/file and dir/file names.\n"
"\n"
"-u, -U num, -c, -C num\n"
"\tCreate a unified diff (-u, -U) with num lines of context. Create\n"
"\ta context diff (-c, -C) with num lines of context. The number of\n"
"\tcontext lines defaults to 3.\n"
"\n"
"--no-timestamps\n"
"\tDo not include file timestamps in patch headers.\n"
"\n"
"--no-index\n"
"\tDo not output Index: lines.\n"
"\n"
"-z\tWrite to standard output the changes that have been made\n"
"\trelative to the topmost or specified patch.\n"
"\n"
"-R\tCreate a reverse diff.\n"
"\n"
"-P patch\n"
"\tCreate a diff for the specified patch.  (Defaults to the topmost\n"
"\tpatch.)\n"
"\n"
"--combine patch\n"
"\tCreate a combined diff for all patches between this patch and\n"
"\tthe patch specified with -P. A patch name of \\`-' is equivalent\n"
"\tto specifying the first applied patch.\n"
"\n"
"--snapshot\n"
"\tDiff against snapshot (see \\`quilt snapshot -h').\n"
"\n"
"--diff=utility\n"
"\tUse the specified utility for generating the diff. The utility\n"
"\tis invoked with the original and new file name as arguments.\n"
"\n"
"--color[=always|auto|never]\n"
"\tUse syntax coloring (auto activates it only if the output is a tty).\n"
"\n"
"--sort\tSort files by their name instead of preserving the original order.\n"
msgstr ""

#: quilt/diff.in:226
msgid ""
"Options \\`--combine', \\`--snapshot', and \\`-z' cannot be combined.\\n"
msgstr ""

#: quilt/diff.in:240
msgid ""
"Cannot diff patches with -p%s, please specify -p0, -p1, or -pab instead\\n"
msgstr ""

#: quilt/diff.in:249
msgid "No snapshot to diff against\\n"
msgstr ""

#: quilt/diff.in:283 quilt/files.in:105 quilt/mail.in:432
msgid "Patch %s not applied before patch %s\\n"
msgstr ""

#: quilt/diff.in:351
msgid "File %s is not being modified\\n"
msgstr ""

#: quilt/diff.in:370
msgid "Diff failed, aborting\\n"
msgstr ""

#: quilt/diff.in:377
msgid "Warning: more recent patches modify files in patch %s\\n"
msgstr ""

#: quilt/edit.in:24
msgid "Usage: quilt edit file ...\\n"
msgstr ""

#: quilt/edit.in:27
msgid ""
"\n"
"Edit the specified file(s) in \\$EDITOR (%s) after adding it (them) to\n"
"the topmost patch.\n"
msgstr ""

#: quilt/files.in:22
msgid "Usage: quilt files [-v] [-a] [-l] [--combine patch] [patch]\\n"
msgstr ""

#: quilt/files.in:25
msgid ""
"\n"
"Print the list of files that the topmost or specified patch changes.\n"
"\n"
"-a\tList all files in all applied patches.\n"
"\n"
"-l\tAdd patch name to output.\n"
"\n"
"-v\tVerbose, more user friendly output.\n"
"\n"
"--combine patch\n"
"\tCreate a listing for all patches between this patch and\n"
"\tthe topmost or specified patch. A patch name of \\`-' is\n"
"\tequivalent to specifying the first applied patch.\n"
"\n"
msgstr ""

#: quilt/fold.in:22
msgid "Usage: quilt fold [-R] [-q] [-f] [-p strip-level]\\n"
msgstr ""

#: quilt/fold.in:25
msgid ""
"\n"
"Integrate the patch read from standard input into the topmost patch:\n"
"After making sure that all files modified are part of the topmost\n"
"patch, the patch is applied with the specified strip level (which\n"
"defaults to 1).\n"
"\n"
"-R\tApply patch in reverse.\n"
"\n"
"-q\tQuiet operation.\n"
"\n"
"-f\tForce apply, even if the patch has rejects. Unless in quiet mode,\n"
"\tapply the patch interactively: the patch utility may ask questions.\n"
"\n"
"-p strip-level\n"
"\tThe number of pathname components to strip from file names\n"
"\twhen applying patchfile.\n"
msgstr ""

#: quilt/fold.in:131
msgid "File %s may be corrupted\\n"
msgstr ""

#: quilt/fork.in:22
msgid "Usage: quilt fork [new_name]\\n"
msgstr ""

#: quilt/fork.in:25
msgid ""
"\n"
"Fork the topmost patch.  Forking a patch means creating a verbatim copy\n"
"of it under a new name, and use that new name instead of the original\n"
"one in the current series.  This is useful when a patch has to be\n"
"modified, but the original version of it should be preserved, e.g.\n"
"because it is used in another series, or for the history.  A typical\n"
"sequence of commands would be: fork, edit, refresh.\n"
"\n"
"If new_name is missing, the name of the forked patch will be the current\n"
"patch name, followed by \\`-2'.  If the patch name already ends in a\n"
"dash-and-number, the number is further incremented (e.g., patch.diff,\n"
"patch-2.diff, patch-3.diff).\n"
msgstr ""

#: quilt/fork.in:84
msgid "Patch %s exists already, please choose a new name\\n"
msgstr ""

#: quilt/fork.in:96
msgid "Fork of patch %s to patch %s failed\\n"
msgstr ""

#: quilt/fork.in:102 quilt/refresh.in:344
msgid "Fork of patch %s created as %s\\n"
msgstr ""

#: quilt/graph.in:22
msgid ""
"Usage: quilt graph [--all] [--reduce] [--lines[=num]] [--edge-labels=files] "
"[-T ps] [patch]\\n"
msgstr ""

#: quilt/graph.in:26
msgid ""
"\n"
"Generate a dot(1) directed graph showing the dependencies between\n"
"applied patches. A patch depends on another patch if both touch the same\n"
"file or, with the --lines option, if their modifications overlap. Unless\n"
"otherwise specified, the graph includes all patches that the topmost\n"
"patch depends on.\n"
"When a patch name is specified, instead of the topmost patch, create a\n"
"graph for the specified patch. The graph will include all other patches\n"
"that this patch depends on, as well as all patches that depend on this\n"
"patch.\n"
"\n"
"--all\tGenerate a graph including all applied patches and their\n"
"\tdependencies. (Unapplied patches are not included.)\n"
"\n"
"--reduce\n"
"\tEliminate transitive edges from the graph.\n"
"\n"
"--lines[=num]\n"
"\tCompute dependencies by looking at the lines the patches modify.\n"
"\tUnless a different num is specified, two lines of context are\n"
"\tincluded.\n"
"\n"
"--edge-labels=files\n"
"\tLabel graph edges with the file names that the adjacent patches\n"
"\tmodify.\n"
"\n"
"-T ps\tDirectly produce a PostScript output file.\n"
msgstr ""

#: quilt/grep.in:22
msgid "Usage: quilt grep [-h|options] {pattern}\\n"
msgstr ""

#: quilt/grep.in:25
msgid ""
"\n"
"Grep through the source files, recursively, skipping patches and quilt\n"
"meta-information. If no filename argument is given, the whole source\n"
"tree is searched. Please see the grep(1) manual page for options.\n"
"\n"
"-h\tPrint this help. The grep -h option can be passed after a\n"
"\tdouble-dash (--). Search expressions that start with a dash\n"
"\tcan be passed after a second double-dash (-- --).\n"
msgstr ""

#: quilt/header.in:24
msgid ""
"Usage: quilt header [-a|-r|-e] [--backup] [--strip-diffstat] [--strip-"
"trailing-whitespace] [patch]\\n"
msgstr ""

#: quilt/header.in:28
msgid ""
"\n"
"Print or change the header of the topmost or specified patch.\n"
"\n"
"-a, -r, -e\n"
"\tAppend to (-a) or replace (-r) the exiting patch header, or\n"
"\tedit (-e) the header in \\$EDITOR (%s). If none of these options is\n"
"\tgiven, print the patch header.\n"
"\n"
"--strip-diffstat\n"
"\tStrip diffstat output from the header.\n"
"\n"
"--strip-trailing-whitespace\n"
"\tStrip trailing whitespace at the end of lines of the header.\n"
"\n"
"--backup\n"
"\tCreate a backup copy of the old version of a patch as patch~.\n"
msgstr ""

#: quilt/header.in:167
msgid "Replaced header of patch %s\\n"
msgstr ""

#: quilt/header.in:170
msgid "Appended text to header of patch %s\\n"
msgstr ""

#: quilt/import.in:22
msgid ""
"Usage: quilt import [-p num] [-R] [-P patch] [-f] [-d {o|a|n}] patchfile ..."
"\\n"
msgstr ""

#: quilt/import.in:25
msgid ""
"\n"
"Import external patches.  The patches will be inserted following the\n"
"current top patch, and must be pushed after import to apply them.\n"
"\n"
"-p num\n"
"\tNumber of directory levels to strip when applying (default=1)\n"
"\n"
"-R\n"
"\tApply patch in reverse.\n"
"\n"
"-P patch\n"
"\tPatch filename to use inside quilt. This option can only be\n"
"\tused when importing a single patch.\n"
"\n"
"-f\tOverwrite/update existing patches.\n"
"\n"
"-d {o|a|n}\n"
"\tWhen overwriting in existing patch, keep the old (o), all (a), or\n"
"\tnew (n) patch header. If both patches include headers, this option\n"
"\tmust be specified. This option is only effective when -f is used.\n"
msgstr ""

#: quilt/import.in:73
msgid "Patch %s does not exist\\n"
msgstr ""

#: quilt/import.in:96
msgid "Patch headers differ:\\n"
msgstr ""

#: quilt/import.in:99
msgid "Please use -d {o|a|n} to specify which patch header(s) to keep.\\n"
msgstr ""

#: quilt/import.in:164
msgid "Option \\`-P' can only be used when importing a single patch\\n"
msgstr ""

#: quilt/import.in:194
msgid "Patch %s is applied\\n"
msgstr ""

#: quilt/import.in:203
msgid "Patch %s already exists in series.\\n"
msgstr ""

#: quilt/import.in:209
msgid "Patch %s exists. Replace with -f.\\n"
msgstr ""

#: quilt/import.in:220
msgid "Replacing patch %s with new version\\n"
msgstr ""

#: quilt/import.in:224
msgid "Importing patch %s\\n"
msgstr ""

#: quilt/import.in:226
msgid "Importing patch %s (stored as %s)\\n"
msgstr ""

#: quilt/import.in:239
msgid "Failed to import patch %s\\n"
msgstr ""

#: quilt/import.in:248 quilt/refresh.in:331
msgid "Failed to insert patch %s into file series\\n"
msgstr ""

#: quilt/mail.in:24
msgid ""
"Usage: quilt mail {--mbox file|--send} [-m text] [-M file] [--prefix prefix] "
"[--sender ...] [--from ...] [--to ...] [--cc ...] [--bcc ...] [--"
"subject ...] [--reply-to message] [--charset ...] [--signature file] "
"[first_patch [last_patch]]\\n"
msgstr ""

#: quilt/mail.in:27
msgid ""
"\n"
"Create mail messages from a specified range of patches, or all patches in\n"
"the series file, and either store them in a mailbox file, or send them\n"
"immediately. The editor is opened with a template for the introduction.\n"
"Please see %s for details.\n"
"When specifying a range of patches, a first patch name of \\`-' denotes the\n"
"first, and a last patch name of \\`-' denotes the last patch in the series.\n"
"\n"
"-m text\n"
"\tText to use as the text in the introduction. When this option is\n"
"\tused, the editor will not be invoked, and the patches will be\n"
"\tprocessed immediately.\n"
"\n"
"-M file\n"
"\tLike the -m option, but read the introduction from file.\n"
"\n"
"--prefix prefix\n"
"\tUse an alternate prefix in the bracketed part of the subjects\n"
"\tgenerated. Defaults to \\`patch'.\n"
"\n"
"--mbox file\n"
"\tStore all messages in the specified file in mbox format. The mbox\n"
"\tcan later be sent using formail, for example.\n"
"\n"
"--send\n"
"\tSend the messages directly.\n"
"\n"
"--sender\n"
"\tThe envelope sender address to use. The address must be of the form\n"
"\t\\`user@domain.name'. No display name is allowed.\n"
"\n"
"--from, --subject\n"
"\tThe values for the From and Subject headers to use. If no --from\n"
"\toption is given, the value of the --sender option is used.\n"
"\n"
"--to, --cc, --bcc\n"
"\tAppend a recipient to the To, Cc, or Bcc header.\n"
"\n"
"--charset\n"
"\tSpecify a particular message encoding on systems which don't use\n"
"\tUTF-8 or ISO-8859-15. This character encoding must match the one\n"
"\tused in the patches.\n"
"\n"
"--signature file\n"
"\tAppend the specified signature to messages (defaults to ~/.signature\n"
"\tif found; use \\`-' for no signature).\n"
"\n"
"--reply-to message\n"
"\tAdd the appropriate headers to reply to the specified message.\n"
msgstr ""

#: quilt/mail.in:209 quilt/mail.in:217
msgid "Introduction message already specified"
msgstr ""

#: quilt/mail.in:315
msgid "Could not determine the envelope sender address. Please use --sender."
msgstr ""

#: quilt/mail.in:460
msgid "Unable to extract a subject header from %s\\n"
msgstr ""

#: quilt/mail.in:484
msgid "Patches %s have duplicate subject headers.\\n"
msgstr ""

#: quilt/mail.in:493
msgid "File %s does not exist\\n"
msgstr ""

#: quilt/mail.in:553
msgid "Introduction has no subject header (saved as %s)\\n"
msgstr ""

#: quilt/mail.in:556
msgid "Introduction has no subject header\\n"
msgstr ""

#: quilt/mail.in:670
msgid "Introduction saved as %s\\n"
msgstr ""

#: quilt/new.in:22
msgid "Usage: quilt new [-p n|-p ab] {patchname}\\n"
msgstr ""

#: quilt/new.in:25
msgid ""
"\n"
"Create a new patch with the specified file name, and insert it after the\n"
"topmost patch. The name can be prefixed with a sub-directory name, allowing\n"
"for grouping related patches together.\n"
"\n"
"-p n\tCreate a -p n style patch (-p0 or -p1 are supported).\n"
"\n"
"-p ab\tCreate a -p1 style patch, but use a/file and b/file as the\n"
"\toriginal and new filenames instead of the default\n"
"\tdir.orig/file and dir/file names.\n"
"\n"
"Quilt can be used in sub-directories of a source tree. It determines the\n"
"root of a source tree by searching for a %s directory above the\n"
"current working directory. Create a %s directory in the intended root\n"
"directory if quilt chooses a top-level directory that is too high up\n"
"in the directory tree.\n"
msgstr ""

#: quilt/new.in:76
msgid ""
"Cannot create patches with -p%s, please specify -p0, p1, or -pab instead\\n"
msgstr ""

#: quilt/new.in:89
msgid "QUILT_PATCHES(%s) must differ from QUILT_PC(%s)\\n"
msgstr ""

#: quilt/new.in:97 quilt/refresh.in:185
msgid "Patch %s exists already\\n"
msgstr ""

#: quilt/new.in:108
msgid "Patch %s is now on top\\n"
msgstr ""

#: quilt/new.in:110 quilt/refresh.in:340
msgid "Failed to create patch %s\\n"
msgstr ""

#: quilt/next.in:22
msgid "Usage: quilt next [patch]\\n"
msgstr ""

#: quilt/next.in:25
msgid ""
"\n"
"Print the name of the next patch after the specified or topmost patch in\n"
"the series file.\n"
msgstr ""

#: quilt/patches.in:24
msgid ""
"Usage: quilt patches [-v] [--color[=always|auto|never]] {file} [files...]\\n"
msgstr ""

#: quilt/patches.in:27
msgid ""
"\n"
"Print the list of patches that modify any of the specified files. (Uses a\n"
"heuristic to determine which files are modified by unapplied patches.\n"
"Note that this heuristic is much slower than scanning applied patches.)\n"
"\n"
"-v\tVerbose, more user friendly output.\n"
"\n"
"--color[=always|auto|never]\n"
"\tUse syntax coloring (auto activates it only if the output is a tty).\n"
msgstr ""

#: quilt/pop.in:22
msgid "Usage: quilt pop [-afRqv] [--refresh] [num|patch]\\n"
msgstr ""

#: quilt/pop.in:25
msgid ""
"\n"
"Remove patch(es) from the stack of applied patches.  Without options,\n"
"the topmost patch is removed.  When a number is specified, remove the\n"
"specified number of patches.  When a patch name is specified, remove\n"
"patches until the specified patch end up on top of the stack.  Patch\n"
"names may include the patches/ prefix, which means that filename\n"
"completion can be used.\n"
"\n"
"-a\tRemove all applied patches.\n"
"\n"
"-f\tForce remove. The state before the patch(es) were applied will\n"
"\tbe restored from backup files.\n"
"\n"
"-R\tAlways verify if the patch removes cleanly; don't rely on\n"
"\ttimestamp checks.\n"
"\n"
"-q\tQuiet operation.\n"
"\n"
"-v\tVerbose operation.\n"
"\n"
"--refresh\n"
"\tAutomatically refresh every patch before it gets unapplied.\n"
msgstr ""

#: quilt/pop.in:103 quilt/scripts/patchfns.in:915
msgid "Failed to copy files to temporary directory\\n"
msgstr ""

#: quilt/pop.in:128
msgid "Patch %s does not remove cleanly (refresh it or enforce with -f)\\n"
msgstr ""

#: quilt/pop.in:153
msgid "Patch %s appears to be empty, removing\\n"
msgstr ""

#: quilt/pop.in:158
msgid "Removing patch %s\\n"
msgstr ""

#: quilt/pop.in:216 quilt/push.in:373
msgid "Options %s and %s are mutually exclusive\\n"
msgstr ""

#: quilt/pop.in:238
msgid "Patch %s needs to be refreshed first.\\n"
msgstr ""

#: quilt/pop.in:248
msgid "No patch removed\\n"
msgstr ""

#: quilt/pop.in:272 quilt/scripts/patchfns.in:516
msgid "No patches applied\\n"
msgstr ""

#: quilt/pop.in:279 quilt/push.in:437
msgid "Now at patch %s\\n"
msgstr ""

#: quilt/previous.in:22
msgid "Usage: quilt previous [patch]\\n"
msgstr ""

#: quilt/previous.in:25
msgid ""
"\n"
"Print the name of the previous patch before the specified or topmost\n"
"patch in the series file.\n"
msgstr ""

#: quilt/push.in:24
msgid ""
"Usage: quilt push [-afqvm] [--fuzz=N] [--merge[=merge|diff3]] [--leave-"
"rejects] [--color[=always|auto|never]] [--refresh] [num|patch]\\n"
msgstr ""

#: quilt/push.in:27
msgid ""
"\n"
"Apply patch(es) from the series file.  Without options, the next patch\n"
"in the series file is applied.  When a number is specified, apply the\n"
"specified number of patches.  When a patch name is specified, apply\n"
"all patches up to and including the specified patch.  Patch names may\n"
"include the patches/ prefix, which means that filename completion can\n"
"be used.\n"
"\n"
"-a\tApply all patches in the series file.\n"
"\n"
"-q\tQuiet operation.\n"
"\n"
"-f\tForce apply, even if the patch has rejects.\n"
"\n"
"-v\tVerbose operation.\n"
"\n"
"--fuzz=N\n"
"\tSet the maximum fuzz factor (default: 2).\n"
"\n"
"-m, --merge[=merge|diff3]\n"
"\tMerge the patch file into the original files (see patch(1)).\n"
"\n"
"--leave-rejects\n"
"\tLeave around the reject files patch produced, even if the patch\n"
"\tis not actually applied.\n"
"\n"
"--color[=always|auto|never]\n"
"\tUse syntax coloring (auto activates it only if the output is a tty).\n"
"\n"
"--refresh\n"
"\tAutomatically refresh every patch after it was successfully applied.\n"
msgstr ""

#: quilt/push.in:70
msgid "Interrupted by user; patch %s was not applied.\\n"
msgstr ""

#: quilt/push.in:183
msgid "Applying patch %s\\n"
msgstr ""

#: quilt/push.in:217
msgid "Patch %s does not exist; applied empty patch\\n"
msgstr ""

#: quilt/push.in:221
msgid "Patch %s appears to be empty; applied\\n"
msgstr ""

#: quilt/push.in:225
msgid "Applied patch %s (forced; needs refresh)\\n"
msgstr ""

#: quilt/push.in:235
msgid "Patch %s can be reverse-applied\\n"
msgstr ""

#: quilt/push.in:238
msgid "Patch %s does not apply (enforce with -f)\\n"
msgstr ""

#: quilt/push.in:293
msgid "Patch %s is already applied; check your series file\\n"
msgstr ""

#: quilt/push.in:405
msgid "The topmost patch %s needs to be refreshed first.\\n"
msgstr ""

#: quilt/push.in:413
msgid "No patch applied\\n"
msgstr ""

#: quilt/refresh.in:22
msgid ""
"Usage: quilt refresh [-p n|-p ab] [-u|-U num|-c|-C num] [-z[new_name]] [-f] "
"[--no-timestamps] [--no-index] [--diffstat] [--sort] [--backup] [--strip-"
"trailing-whitespace] [patch]\\n"
msgstr ""

#: quilt/refresh.in:26
msgid ""
"\n"
"Refreshes the specified patch, or the topmost patch by default.\n"
"Documentation that comes before the actual patch in the patch file is\n"
"retained.\n"
"\n"
"It is possible to refresh patches that are not on top.  If any patches\n"
"on top of the patch to refresh modify the same files, the script aborts\n"
"by default.  Patches can still be refreshed with -f.  In that case this\n"
"script will print a warning for each shadowed file, changes by more\n"
"recent patches will be ignored, and only changes in files that have not\n"
"been modified by any more recent patches will end up in the specified\n"
"patch.\n"
"\n"
"-p n\tCreate a -p n style patch (-p0 or -p1 supported).\n"
"\n"
"-p ab\tCreate a -p1 style patch, but use a/file and b/file as the\n"
"\toriginal and new filenames instead of the default\n"
"\tdir.orig/file and dir/file names.\n"
"\n"
"-u, -U num, -c, -C num\n"
"\tCreate a unified diff (-u, -U) with num lines of context. Create\n"
"\ta context diff (-c, -C) with num lines of context. The number of\n"
"\tcontext lines defaults to 3.\n"
"\n"
"-z[new_name]\n"
"\tCreate a new patch containing the changes instead of refreshing the\n"
"\ttopmost patch. If no new name is specified, \\`-2' is added to the\n"
"\toriginal patch name, etc. (See the fork command.)\n"
"\n"
"--no-timestamps\n"
"\tDo not include file timestamps in patch headers.\n"
"\n"
"--no-index\n"
"\tDo not output Index: lines.\n"
"\n"
"--diffstat\n"
"\tAdd a diffstat section to the patch header, or replace the\n"
"\texisting diffstat section.\n"
"\n"
"-f\tEnforce refreshing of a patch that is not on top.\n"
"\n"
"--backup\n"
"\tCreate a backup copy of the old version of a patch as patch~.\n"
"\n"
"--sort\tSort files by their name instead of preserving the original order.\n"
"\n"
"--strip-trailing-whitespace\n"
"\tStrip trailing whitespace at the end of lines.\n"
msgstr ""

#: quilt/refresh.in:171
msgid "Can only refresh the topmost patch with -z currently\\n"
msgstr ""

#: quilt/refresh.in:202
msgid ""
"Cannot refresh patches with -p%s, please specify -p0, -p1, or -pab instead\\n"
msgstr ""

#: quilt/refresh.in:240
msgid ""
"More recent patches modify files in patch %s. Enforce refresh with -f.\\n"
msgstr ""

#: quilt/refresh.in:246
msgid ""
"Cannot use --strip-trailing-whitespace on a patch that has shadowed files.\\n"
msgstr ""

#: quilt/refresh.in:252 quilt/refresh.in:352
msgid "Nothing in patch %s\\n"
msgstr ""

#: quilt/refresh.in:324
msgid "Patch %s is unchanged\\n"
msgstr ""

#: quilt/refresh.in:350
msgid "Refreshed patch %s\\n"
msgstr ""

#: quilt/remove.in:22
msgid "Usage: quilt remove [-P patch] {file} ...\\n"
msgstr ""

#: quilt/remove.in:25
msgid ""
"\n"
"Remove one or more files from the topmost or named patch.  Files that\n"
"are modified by patches on top of the specified patch cannot be removed.\n"
"\n"
"-P patch\n"
"\tRemove named files from the named patch.\n"
msgstr ""

#: quilt/remove.in:73 quilt/revert.in:75
msgid "File %s is not in patch %s\\n"
msgstr ""

#: quilt/remove.in:91
msgid "Failed to remove file %s from patch %s\\n"
msgstr ""

#: quilt/remove.in:105
msgid "File %s removed from patch %s\\n"
msgstr ""

#: quilt/rename.in:22
msgid "Usage: quilt rename [-P patch] new_name\\n"
msgstr ""

#: quilt/rename.in:25
msgid ""
"\n"
"Rename the topmost or named patch.\n"
"\n"
"-P patch\n"
"\tPatch to rename.\n"
msgstr ""

#: quilt/rename.in:84
msgid "Patch %s exists already, please choose a different name\\n"
msgstr ""

#: quilt/rename.in:98
msgid "Renaming of patch %s to %s failed\\n"
msgstr ""

#: quilt/rename.in:104
msgid "Patch %s renamed to %s\\n"
msgstr ""

#: quilt/revert.in:22
msgid "Usage: quilt revert [-P patch] {file} ...\\n"
msgstr ""

#: quilt/revert.in:25
msgid ""
"\n"
"Revert uncommitted changes to the topmost or named patch for the specified\n"
"file(s): after the revert, 'quilt diff -z' will show no differences for "
"those\n"
"files. Changes to files that are modified by patches on top of the "
"specified\n"
"patch cannot be reverted.\n"
"\n"
"-P patch\n"
"\tRevert changes in the named patch.\n"
msgstr ""

#: quilt/revert.in:103 quilt/revert.in:112
msgid "File %s is unchanged\\n"
msgstr ""

#: quilt/revert.in:120
msgid "Failed to revert changes to %s in patch %s\\n"
msgstr ""

#: quilt/revert.in:124
msgid "Changes to %s in patch %s reverted\\n"
msgstr ""

#: quilt/scripts/edmail.in:98
#, perl-format
msgid "Display name `%s' contains unpaired parentheses\n"
msgstr ""

#: quilt/scripts/edmail.in:116
#, perl-format
msgid "Delivery address `%s' is invalid\n"
msgstr ""

#: quilt/scripts/patchfns.in:235 quilt/scripts/patchfns.in:529
msgid "%s is not a regular file\\n"
msgstr ""

#: quilt/scripts/patchfns.in:483 quilt/scripts/patchfns.in:500
msgid "No patches in series\\n"
msgstr ""

#: quilt/scripts/patchfns.in:485 quilt/scripts/patchfns.in:502
msgid "No series file found\\n"
msgstr ""

#: quilt/scripts/patchfns.in:558
msgid "Patch %s is not in series\\n"
msgstr ""

#: quilt/scripts/patchfns.in:586
msgid "Patch %s is not applied\\n"
msgstr ""

#: quilt/scripts/patchfns.in:623
msgid "File series fully applied, ends at patch %s\\n"
msgstr ""

#: quilt/scripts/patchfns.in:768
msgid "Diff failed on file '%s', aborting\\n"
msgstr ""

#: quilt/scripts/patchfns.in:933
msgid "Failed to patch temporary files\\n"
msgstr ""

#: quilt/scripts/patchfns.in:976
msgid ""
"The quilt meta-data in this tree has version %s, but this version of quilt "
"can only handle meta-data formats up to and including version %s. Please pop "
"all the patches using the version of quilt used to push them before "
"downgrading.\\n"
msgstr ""

#: quilt/scripts/patchfns.in:1049
msgid "You have to install '%s' (from package %s) to use 'quilt %s'\\n"
msgstr ""

#: quilt/scripts/patchfns.in:1128
msgid "Cannot change into parent directory %s/\\n"
msgstr ""

#: quilt/scripts/patchfns.in:1169
msgid ""
"The working tree was created by an older version of quilt. Please run 'quilt "
"upgrade'.\\n"
msgstr ""

#: quilt/scripts/patchfns.in:1177
msgid ""
"The series file no longer matches the applied patches. Please run 'quilt pop "
"-a'.\\n"
msgstr ""

#: quilt/scripts/remove-trailing-ws.in:45
#, perl-format
msgid "SYNOPSIS: %s [-p num] [-n] [patch]\n"
msgstr ""

#: quilt/scripts/remove-trailing-ws.in:68
#, perl-format
msgid "%s: I'm confused.\n"
msgstr ""

#: quilt/scripts/remove-trailing-ws.in:116
#, perl-format
msgid "Warning: trailing whitespace in line %s of %s\n"
msgstr ""

#: quilt/scripts/remove-trailing-ws.in:119
#, perl-format
msgid "Warning: trailing whitespace in lines %s of %s\n"
msgstr ""

#: quilt/scripts/remove-trailing-ws.in:123
#, perl-format
msgid "Removing trailing whitespace from line %s of %s\n"
msgstr ""

#: quilt/scripts/remove-trailing-ws.in:126
#, perl-format
msgid "Removing trailing whitespace from lines %s of %s\n"
msgstr ""

#: quilt/scripts/remove-trailing-ws.in:146
#, perl-format
msgid "Renaming %s to %s: %s\n"
msgstr ""

#: quilt/series.in:22
msgid "Usage: quilt series [--color[=always|auto|never]] [-v]\\n"
msgstr ""

#: quilt/series.in:25
msgid ""
"\n"
"Print the names of all patches in the series file.\n"
"\n"
"--color[=always|auto|never]\n"
"\tUse syntax coloring (auto activates it only if the output is a tty).\n"
"\n"
"-v\tVerbose, more user friendly output.\n"
msgstr ""

#: quilt/setup.in:38 quilt/setup.in:58
msgid "Directory %s exists\\n"
msgstr ""

#: quilt/setup.in:64
msgid "File %s exists\\n"
msgstr ""

#: quilt/setup.in:266
msgid ""
"Usage: quilt setup [-d path-prefix] [-v] [--sourcedir dir] [--fuzz=N] [--"
"slow|--fast] {specfile|seriesfile}\\n"
msgstr ""

#: quilt/setup.in:269
msgid ""
"\n"
"Initializes a source tree from an rpm spec file or a quilt series file.\n"
"\n"
"-d\tOptional path prefix for the resulting source tree.\n"
"\n"
"--sourcedir\n"
"\tDirectory that contains the package sources. Defaults to \\`.'.\n"
"\n"
"-v\tVerbose debug output.\n"
"\n"
"--fuzz=N\n"
"\tSet the maximum fuzz factor (needs rpm 4.6 or later).\n"
"\n"
"--slow\tUse the original, slow method to process the spec file. This is the\n"
"\tdefault for now, but that might change in the future. In this mode,\n"
"\trpmbuild generates a working tree in a temporary directory while all\n"
"\tits actions are recorded, and then everything is replayed from scratch\n"
"\tin the target directory.\n"
"\n"
"--fast\tUse an alternative, faster method to process the spec file. In this\n"
"\tmode, rpmbuild is told to generate a working tree directly in the\n"
"\ttarget directory. If the input is a series file, it is assumed that\n"
"\tall archives have been extracted manually beforehand.\n"
msgstr ""

#: quilt/setup.in:373
msgid "The %%prep section of %s failed; results may be incomplete\\n"
msgstr ""

#: quilt/setup.in:376
msgid "The -v option will show rpm's output\\n"
msgstr ""

#: quilt/setup.in:432 quilt/setup.in:444
msgid "File %s not found\\n"
msgstr ""

#: quilt/setup.in:435 quilt/setup.in:447
msgid "Unpacking archive %s\\n"
msgstr ""

#: quilt/setup.in:457
msgid "Trying alternative patches and series names..."
msgstr ""

#: quilt/snapshot.in:22
msgid "Usage: quilt snapshot [-d]\\n"
msgstr ""

#: quilt/snapshot.in:25
msgid ""
"\n"
"Take a snapshot of the current working state.  After taking the snapshot,\n"
"the tree can be modified in the usual ways, including pushing and\n"
"popping patches.  A diff against the tree at the moment of the\n"
"snapshot can be generated with \\`quilt diff --snapshot'.\n"
"\n"
"-d\tOnly remove current snapshot.\n"
msgstr ""

#: quilt/top.in:22
msgid "Usage: quilt top\\n"
msgstr ""

#: quilt/top.in:25
msgid ""
"\n"
"Print the name of the topmost patch on the current stack of applied\n"
"patches.\n"
msgstr ""

#: quilt/unapplied.in:22
msgid "Usage: quilt unapplied [patch]\\n"
msgstr ""

#: quilt/unapplied.in:25
msgid ""
"\n"
"Print a list of patches that are not applied, or all patches that follow\n"
"the specified patch in the series file.\n"
msgstr ""

#: quilt/upgrade.in:25
msgid "Usage: quilt upgrade\\n"
msgstr ""

#: quilt/upgrade.in:28
msgid ""
"\n"
"Upgrade the meta-data in a working tree from an old version of quilt to the\n"
"current version. This command is only needed when the quilt meta-data "
"format\n"
"has changed, and the working tree still contains old-format meta-data. In "
"that\n"
"case, quilt will request to run \\`quilt upgrade'.\n"
msgstr ""

#: quilt/upgrade.in:67
msgid ""
"The quilt meta-data in %s are already in the version %s format; nothing to do"
"\\n"
msgstr ""

#: quilt/upgrade.in:71
msgid "Converting meta-data to version %s\\n"
msgstr ""

#: quilt/upgrade.in:102
msgid "Conversion failed\\n"
msgstr ""

#: quilt/upgrade.in:103
msgid ""
"\n"
"Please remove all patches using \\`quilt pop -a' from the quilt version used "
"to create this working tree, or remove the %s directory and apply the "
"patches from scratch.\\n"
msgstr ""