YATE-MIB DEFINITIONS ::= BEGIN

IMPORTS
	MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
	Integer32, Gauge32, Counter32
		FROM SNMPv2-SMI

	DisplayString
		FROM SNMPv2-TC

	null-team
		FROM NULL-TEAM-MIB;

yate MODULE-IDENTITY
	LAST-UPDATED	"201701031300Z"
	ORGANIZATION	"S.C. Null Team Impex S.R.L."
	CONTACT-INFO
		"Diana Cionoiu
		  phone:	+40726088939
		  office:	+40316201400
		  Email: office@null.ro"
	DESCRIPTION
		"The MIB module for Yate."
	REVISION	"201701031300Z"
	DESCRIPTION
		"Most recent version of this MIB module."
	REVISION	"201009281300Z"
	DESCRIPTION
		"Initial published revision."
	::= { null-team 1 }

PercentageOrNone ::= Integer32 (-1..100)

yateMIBRevision OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"YATE MIB Revision."
	::= { yate 1 }

-- yateVersion

version OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"String form for the YATE version."
	::= { yate 2 }

status			OBJECT IDENTIFIER ::= { yate 3 }
moduleInfo		OBJECT IDENTIFIER ::= { yate 4 }
activeCalls 	 	OBJECT IDENTIFIER ::= { yate 5 }
connections		OBJECT IDENTIFIER ::= { yate 6 }
statistics		OBJECT IDENTIFIER ::= { yate 7 }
alarms			OBJECT IDENTIFIER ::= { yate 8 }
commands		OBJECT IDENTIFIER ::= { yate 9 }



-- status BEGIN

engine		OBJECT IDENTIFIER ::= { status 1 }

plugins OBJECT-TYPE
	SYNTAX		Gauge32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Number of plugins loaded by the engine."
	::= { engine 1 }

handlers OBJECT-TYPE
	SYNTAX		Gauge32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Number of message handlers installed by the engine."
	::= { engine 2 }

messages OBJECT-TYPE
	SYNTAX		Gauge32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Engine number of messages waiting to be handled."
	::= { engine 3 }
 
msgMaxQueued OBJECT-TYPE
	SYNTAX		Gauge32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Maximum number of queued messages (high watermark)."
	::= { messages 1 }

msgLastSecond OBJECT-TYPE
	SYNTAX		Gauge32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Current message rate (messages dispatched in the last second)."
	::= { messages 2 }

msgMaxPerSecond OBJECT-TYPE
	SYNTAX		Gauge32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Maximum message rate (highest dispatched messages count in any second of the engine run)."
	::= { messages 3 }

msgEnqueued OBJECT-TYPE
	SYNTAX		Counter64
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Number of messages enqueued in the entire engine run."
	::= { messages 4 }

msgDequeued OBJECT-TYPE
	SYNTAX		Counter64
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Number of messages dequeued in the entire engine run."
	::= { messages 5 }

msgDispatched OBJECT-TYPE
	SYNTAX		Counter64
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Number of messages dispatched (includes dequeued and dispatched messages by worker thread) in the entire engine run."
	::= { messages 6 }

threads OBJECT-TYPE
	SYNTAX		Gauge32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Engine number of threads."
	::= { engine 4 }

workers OBJECT-TYPE
	SYNTAX		Gauge32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Engine number of workers."
	::= { engine 5 }

mutexes OBJECT-TYPE
	SYNTAX		Gauge32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Engine total number of mutexes."
	::= { engine 6 }

locks OBJECT-TYPE
	SYNTAX		Gauge32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Engine number of locked mutexes."
	::= { mutexes 1 }

semaphores OBJECT-TYPE
	SYNTAX		Gauge32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Engine total number of semaphores."
	::= { engine 7 }

waitingSemaphores OBJECT-TYPE
	SYNTAX		Gauge32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Engine number of waiting semaphores."
	::= { semaphores 1 }

acceptStatus OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The call accept status of the YATE engine."
	::= { engine 8 }

cpuLoad		OBJECT IDENTIFIER ::= { engine 9 }

kernelLoad OBJECT-TYPE
	SYNTAX		Integer32 (0..100)
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"CPU load of YATE in kernel space."
	::= { cpuLoad 1 }

userLoad OBJECT-TYPE
	SYNTAX		Integer32 (0..100)
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"CPU load of YATE in user space."
	::= { cpuLoad 2 }

totalLoad OBJECT-TYPE
	SYNTAX		Integer32 (0..100)
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Total CPU load for YATE."
	::= { cpuLoad 3 }

systemLoad OBJECT-TYPE
	SYNTAX		Integer32 (0..100)
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The CPU load of the host system."
	::= { cpuLoad 4 }

-- engine END
-- nodeInfo BEGIN

nodeInfo 	OBJECT IDENTIFIER ::= { status 2 }

name OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Name of the node on which YATE runs."
	::= { nodeInfo 1 }

runAttempt OBJECT-TYPE
	SYNTAX		Counter32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Number of times Yate has been restarted by the supervisor."
	::= { nodeInfo 2 }

state OBJECT-TYPE
	SYNTAX 		DisplayString
	MAX-ACCESS 	read-only
	STATUS 		current
	DESCRIPTION
		"The state of the YATE node."
	::= { nodeInfo 3 }

upTime OBJECT-TYPE
	SYNTAX 		Counter32
	MAX-ACCESS 	read-only
	STATUS 		current
	DESCRIPTION
		"Time in seconds since YATE started."
	::= { nodeInfo 4 }

runId OBJECT-TYPE
	SYNTAX 		DisplayString
	MAX-ACCESS 	read-only
	STATUS 		current
	DESCRIPTION
		"Identifier for the running YATE instance."
	::= { nodeInfo 5 }

-- nodeInfo END
-- databaseInfo BEGIN

databaseInfo 	OBJECT IDENTIFIER ::= { status 3 }

successfulConnections OBJECT-TYPE
	SYNTAX		Counter32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Number of succesful connections made to the database."
	::= { databaseInfo 1 }

failedConnections OBJECT-TYPE
	SYNTAX		Counter32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Number of failed connections to the database."
	::= { databaseInfo 2 }

-- databaseInfo END
-- moduleInfo BEGIN

moduleCount OBJECT-TYPE
	SYNTAX		Gauge32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Number of loaded modules."
	::= { moduleInfo 1 }

moduleTable  OBJECT-TYPE
	SYNTAX		SEQUENCE OF ModuleEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION
		"Module information table."
	::= { moduleInfo 2 }

moduleEntry OBJECT-TYPE
	SYNTAX		ModuleEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION
		"Module information table entry."
	::= { moduleTable 1 }

ModuleEntry ::= SEQUENCE {
	moduleIndex	Gauge32,
	moduleName	DisplayString,
	moduleType	DisplayString,
	moduleExtra	DisplayString
}

moduleIndex OBJECT-TYPE
	SYNTAX		Gauge32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Module table index."
	::= { moduleEntry 1 }

moduleName OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Module name."
	::= { moduleEntry 2 }

moduleType OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Module type."
	::= { moduleEntry 3 }

moduleExtra OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Module additional information."
	::= { moduleEntry 4 }

-- moduleInfo END
-- activeCalls BEGIN

activeCallsCount OBJECT-TYPE
	SYNTAX		Gauge32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Number of active calls."
	::= { activeCalls 1 }

activeCallsTable  OBJECT-TYPE
	SYNTAX		SEQUENCE OF ActiveCallEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION
		"Table containing information about current calls."
	::= { activeCalls 2 }

activeCallEntry OBJECT-TYPE
	SYNTAX		ActiveCallEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION
		"Table entry containing information about a current call."
	::= { activeCallsTable 1 }

ActiveCallEntry ::= SEQUENCE {
	callEntryIndex		Gauge32,
	callEntryID		DisplayString,
	callEntryStatus		DisplayString,
	callEntryCaller		DisplayString,
	callEntryCalled		DisplayString,
	callEntryDuration	Counter32,
	callEntryPeerChan	DisplayString
}

callEntryIndex OBJECT-TYPE
	SYNTAX		Gauge32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Active call index."
	::= { activeCallEntry 1 }

callEntryID OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Active call identification."
	::= { activeCallEntry 2 }

callEntryStatus OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Active call status."
	::= { activeCallEntry 3 }

callEntryCaller OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Name of the caller of this active call."
	::= { activeCallEntry 4 }

callEntryCalled OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Name of the called party of this active call."
	::= { activeCallEntry 5 }

callEntryDuration OBJECT-TYPE
	SYNTAX		Counter32
	UNITS		"seconds"
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Duration of this active call in seconds."
	::= { activeCallEntry 6 }

callEntryPeerChan OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The peer of this active call."
	::= { activeCallEntry 7 }

-- activeCalls END
-- connections BEGIN

trunks 		OBJECT IDENTIFIER ::= { connections 1 }

trunksCount OBJECT-TYPE
	SYNTAX		Gauge32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Number of configured PSTN trunks."
	::= { trunks 1 }

trunkTable  OBJECT-TYPE
	SYNTAX		SEQUENCE OF TrunkEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION
		"Table containing information about configured PSTN trunks."
	::= { trunks 2 }

trunkEntry OBJECT-TYPE
	SYNTAX		TrunkEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION
		"Table entry containing information about a configured PSTN trunk."
	::= { trunkTable 1 }

TrunkEntry ::= SEQUENCE {
	trunkIndex		Gauge32,
	trunkID			DisplayString,
	trunkType		DisplayString,
	trunkCircuitCount	Gauge32,
	trunkCurrentCallsCount	Gauge32,
	trunkDownAlarms		Counter32,
	trunkCircuitsLocked	Gauge32,
	trunkCircuitsIdle	Gauge32
}

trunkIndex OBJECT-TYPE
	SYNTAX		Gauge32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Index of the PSTN trunk in the table."
	::= { trunkEntry 1 }

trunkID OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The name of the PSTN trunk."
	::= { trunkEntry 2 }

trunkType OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"PSTN trunk type."
	::= { trunkEntry 3 }

trunkCircuitCount OBJECT-TYPE
	SYNTAX		Gauge32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The number of circuits of the PSTN trunk."
	::= { trunkEntry 4 }

trunkCurrentCallsCount OBJECT-TYPE
	SYNTAX		Gauge32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The number of calls of the PSTN trunk."
	::= { trunkEntry 5 }

trunkDownAlarms OBJECT-TYPE
	SYNTAX 		Counter32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Number of times an alarm that signals that a trunk is down alarm has been sent."
	::= { trunkEntry 6 }

trunkCircuitsLocked OBJECT-TYPE
	SYNTAX		Gauge32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The number of locked circuits of the PSTN trunk."
	::= { trunkEntry 7 }

trunkCircuitsIdle OBJECT-TYPE
	SYNTAX		Gauge32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The number of idle circuits of the PSTN trunk."
	::= { trunkEntry 8 }

-- trunks END
-- linksets BEGIN

linksets 	OBJECT IDENTIFIER ::= { connections 2 }

linksetCount OBJECT-TYPE
	SYNTAX		Gauge32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Number of configured linksets."
	::= { linksets 1 }

linksetTable  OBJECT-TYPE
	SYNTAX		SEQUENCE OF LinksetEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION
		"Table containing information about configured linksets."
	::= { linksets 2 }

linksetEntry OBJECT-TYPE
	SYNTAX		LinksetEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION
		"Table entry containing information about a configured linkset."
	::= { linksetTable 1 }

LinksetEntry ::= SEQUENCE {
	linksetIndex		Gauge32,
	linksetID		DisplayString,
	linksetType		DisplayString,
	linksetStatus		DisplayString,
	linksetDownAlarms 	Counter32
}

linksetIndex OBJECT-TYPE
	SYNTAX		Gauge32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Index of the linkset in the table."
	::= { linksetEntry 1 }

linksetID OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The name of the linkset."
	::= { linksetEntry 2 }

linksetType OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The type of the linkset."
	::= { linksetEntry 3 }

linksetStatus OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The status of the linkset."
	::= { linksetEntry 4 }

linksetDownAlarms OBJECT-TYPE
	SYNTAX 		Counter32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Number of times an alarm that signals that this linkset is down alarm has been sent."
	::= { linksetEntry 5 }


-- linksets END
-- links BEGIN

links		OBJECT IDENTIFIER ::= { connections 3 }

linkCount OBJECT-TYPE
	SYNTAX		Gauge32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Number of configured links."
	::= { links 1 }

linksTable  OBJECT-TYPE
	SYNTAX		SEQUENCE OF LinkEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION
		"Table containing information about configured links."
	::= { links 2 }

linkEntry OBJECT-TYPE
	SYNTAX		LinkEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION
		"Table entry containing information about a configured link."
	::= { linksTable 1 }

LinkEntry ::= SEQUENCE {
	linkIndex	Gauge32,
	linkID		DisplayString,
	linkType	DisplayString,
	linkStatus	DisplayString,
	linkDownAlarms	Counter32,
	linkUptime	Counter32
}

linkIndex OBJECT-TYPE
	SYNTAX		Gauge32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The index of the link in the table."
	::= { linkEntry 1 }

linkID OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The name of the link."
	::= { linkEntry 2 }

linkType OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The type of the link."
	::= { linkEntry 3 }

linkStatus OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The status of the link."
	::= { linkEntry 4 }

linkDownAlarms OBJECT-TYPE
	SYNTAX 		Counter32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Number of times an alarm that signals that this link is down alarm has been sent."
	::= { linkEntry 5 }

linkUptime OBJECT-TYPE
	SYNTAX 		Counter32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Time since the link is up in seconds."
	::= { linkEntry 6 }

-- links END
-- interfaces BEGIN

interfaces	OBJECT IDENTIFIER ::= { connections 4 }

interfacesCount OBJECT-TYPE
	SYNTAX		Gauge32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Number of configured interfaces."
	::= { interfaces 1 }

interfacesTable  OBJECT-TYPE
	SYNTAX		SEQUENCE OF InterfaceEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION
		"Table containing information about configured interfaces."
	::= { interfaces 2 }

interfaceEntry OBJECT-TYPE
	SYNTAX		InterfaceEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION
		"Table entry containing information about a interface."
	::= { interfacesTable 1 }

InterfaceEntry ::= SEQUENCE {
	interfaceIndex		Gauge32,
	interfaceID		DisplayString,
	interfaceStatus		DisplayString,
	interfaceDownAlarms	Counter32
}

interfaceIndex OBJECT-TYPE
	SYNTAX		Gauge32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The index of this interface in the table."
	::= { interfaceEntry 1 }

interfaceID OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The name of the link."
	::= { interfaceEntry 2 }

interfaceStatus OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The status of the link."
	::= { interfaceEntry 3}

interfaceDownAlarms OBJECT-TYPE
	SYNTAX 		Counter32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Number of times an alarm that signals that this interface is down has been sent."
	::= { interfaceEntry 4 }

-- interfaces END
-- isdnQ921 BEGIN
isdnQ921	OBJECT IDENTIFIER ::= { connections 5 }
-- isdnQ921 END

-- accounts begin
accounts	OBJECT IDENTIFIER ::= { connections 6 }

accountsCount OBJECT-TYPE
	SYNTAX		Gauge32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Number of accounts."
	::= { accounts 1 }

accountsTable  OBJECT-TYPE
	SYNTAX		SEQUENCE OF AccountEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION
		"Table containing information about configured accounts."
	::= { accounts 2 }

accountEntry OBJECT-TYPE
	SYNTAX		AccountEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION
		"Table entry containing information about an account."
	::= { accountsTable 1 }

AccountEntry ::= SEQUENCE {
	accountIndex		Gauge32,
	accountID		DisplayString,
	accountStatus		DisplayString,
	accountProtocol		DisplayString,
	accountUsername		DisplayString
}

accountIndex OBJECT-TYPE
	SYNTAX		Gauge32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The index of the account in the table."
	::= { accountEntry 1 }

accountID OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The name of the account."
	::= { accountEntry 2 }

accountStatus OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The status of the account."
	::= { accountEntry 3 }

accountProtocol OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The protocol used for this account."
	::= { accountEntry 4 }

accountUsername OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The username used by this account."
	::= { accountEntry 5 }

-- accounts end

-- connections END

-- statistics BEGIN

calls 			OBJECT IDENTIFIER ::= { statistics 1 }

-- callCounters BEGIN

callCounters		OBJECT IDENTIFIER ::= { calls 1 }

incomingCalls OBJECT-TYPE
	SYNTAX		Counter32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Number of incoming calls."
	::= { callCounters 1 }

outgoingCalls  OBJECT-TYPE
	SYNTAX		Counter32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Number of outgoing calls."
	::= { callCounters 2 }

-- callCounters END

-- serviceQuality BEGIN

serviceQuality 		OBJECT IDENTIFIER ::= { calls 2 }

qosDirectionsCount  OBJECT-TYPE
	SYNTAX		Gauge32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Number of monitored for service quality directions."
	::= { serviceQuality 1 }

qosDirectionsTable  OBJECT-TYPE
	SYNTAX		SEQUENCE OF QOSEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION
		"Table containing service quality information about configured directions."
	::= { serviceQuality 2 }

qosEntry OBJECT-TYPE
	SYNTAX		QOSEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION
		"Table entry containing service quality information about a direction."
	::= { qosDirectionsTable 1 }

QOSEntry ::= SEQUENCE {
	qosEntryIndex		Gauge32,
	qosEntryDirection	DisplayString,
	asrData			ASRData,
	nerData			NERData,
	callEndCauseCounters	EndCauseCounters
}

qosEntryIndex OBJECT-TYPE
	SYNTAX		Gauge32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The index for a monitored direction."
	::= { qosEntry 1 }

qosEntryDirection OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The name of the monitored direction."
	::= { qosEntry 2 }

asrData OBJECT-TYPE
	SYNTAX		ASRData
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION
		"ASR information for this direction."
	::= { qosEntry 3 }

ASRData ::= SEQUENCE {
	lowASRThreshold		PercentageOrNone,
	highASRThreshold	PercentageOrNone,
	currentASR		PercentageOrNone,
	overallASR		PercentageOrNone,
	currentLowASRAlarmCount		Counter32,
	currentHighASRAlarmCount	Counter32,
	overallLowASRAlarmCount		Counter32,
	overallHighASRAlarmCount	Counter32
}

lowASRThreshold OBJECT-TYPE
	SYNTAX		PercentageOrNone
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The lower threshold for triggering an ASR alarm. A value of -1 means that the threshold has not been set."
	::= { asrData 1 }

highASRThreshold OBJECT-TYPE
	SYNTAX		PercentageOrNone
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The upper threshold for triggering an ASR alarm. A value of -1 means that the threshold has not been set."
	::= { asrData 2 }

currentASR OBJECT-TYPE
	SYNTAX		PercentageOrNone
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The ASR value for the configured time interval. A value of -1 means that there haven't been
		    calls in order to compute the ASR value."
	::= { asrData 3 }

overallASR OBJECT-TYPE
	SYNTAX		PercentageOrNone
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The ASR value since YATE started. A value of -1 means that there haven't been
		    calls in order to compute the ASR value."
	::= { asrData 4 }

currentLowASRAlarmCount OBJECT-TYPE
	SYNTAX		Counter32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The number of times a low ASR alarm has been sent."
	::= { asrData 5 }

currentHighASRAlarmCount OBJECT-TYPE
	SYNTAX		Counter32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The number of times a high ASR alarm has been sent since Yate started."
	::= { asrData 6 }

overallLowASRAlarmCount OBJECT-TYPE
	SYNTAX		Counter32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The number of times a low ASR alarm has been sent."
	::= { asrData 7 }

overallHighASRAlarmCount OBJECT-TYPE
	SYNTAX		Counter32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The number of times a high ASR alarm has been sent since Yate started."
	::= { asrData 8 }

nerData OBJECT-TYPE
	SYNTAX		NERData
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION
		"NER information about this direction."
	::= { qosEntry 4 }

NERData ::= SEQUENCE {
	lowNERThreshold		PercentageOrNone,
	currentNER		PercentageOrNone,
	overallNER		PercentageOrNone,
	currentLowNERAlarmCount	Counter32,
	overallLowNERAlarmCount	Counter32
}

lowNERThreshold OBJECT-TYPE
	SYNTAX		PercentageOrNone
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The lower threshold for triggering a NER alarm. A value of -1 means that the threshold has not been set."
	::= { nerData 1 }

currentNER OBJECT-TYPE
	SYNTAX		PercentageOrNone
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The NER value for the configured time interval. A value of -1 means that there haven't been
		    calls in order to compute the NER value."
	::= { nerData 2 }

overallNER OBJECT-TYPE
	SYNTAX		PercentageOrNone
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The NER value since YATE started. A value of -1 means that there haven't been
		    calls in order to compute the NER value."
	::= { nerData 3 }

currentLowNERAlarmCount OBJECT-TYPE
	SYNTAX		Counter32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The number of times a low NER alarm has been sent."
	::= { nerData 4 }

overallLowNERAlarmCount OBJECT-TYPE
	SYNTAX		Counter32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The number of times a low NER alarm has been sent since YATE started."
	::= { nerData 5 }

callEndCauseCounters OBJECT-TYPE
	SYNTAX		EndCauseCounters
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION
		"Counters for call end reasons."
	::= { qosEntry 5 }

EndCauseCounters ::= SEQUENCE {
	currentHangupEndCause		Counter32,
	overallHangupEndCause		Counter32,
	currentRejectedEndCause		Counter32,
	overallRejectedEndCause		Counter32,
	currentBusyEndCause		Counter32,
	overallBusyEndCause		Counter32,
	currentCancelledEndCause	Counter32,
	overallCancelledEndCause	Counter32,
	currentNoAnswerEndCause		Counter32,
	overallNoAnswerEndCause		Counter32,
	currentNoRouteEndCause		Counter32,
	overallNoRouteEndCause		Counter32,
	currentNoConnectionEndCause	Counter32,
	overallNoConnectionEndCause	Counter32,
	currentNoAuthEndCause		Counter32,
	overallNoAuthEndCause		Counter32,
	currentCongestionEndCause	Counter32,
	overallCongestionEndCause	Counter32,
	currentNoMediaEndCause		Counter32,
	overallNoMediaEndCause		Counter32
}

currentHangupEndCause OBJECT-TYPE
	SYNTAX		Counter32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Number of calls ended with hangup in the configured time interval."
	::= { callEndCauseCounters 1 }

overallHangupEndCause OBJECT-TYPE
	SYNTAX		Counter32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Number of calls ended with hangup since YATE started."
	::= { callEndCauseCounters 2 }

currentRejectedEndCause OBJECT-TYPE
	SYNTAX		Counter32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Number of calls ended by being rejected in the configured time interval."
	::= { callEndCauseCounters 3 }

overallRejectedEndCause OBJECT-TYPE
	SYNTAX		Counter32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Number of calls ended by being rejected since YATE started."
	::= { callEndCauseCounters 4 }

currentBusyEndCause OBJECT-TYPE
	SYNTAX		Counter32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Number of calls ended because of busy in the configured time interval."
	::= { callEndCauseCounters 5 }

overallBusyEndCause OBJECT-TYPE
	SYNTAX		Counter32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Number of calls ended because of busy since YATE started."
	::= { callEndCauseCounters 6 }

currentCancelledEndCause OBJECT-TYPE
	SYNTAX		Counter32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Number of calls cancelled in the configured time interval."
	::= { callEndCauseCounters 7 }

overallCancelledEndCause OBJECT-TYPE
	SYNTAX		Counter32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Number of calls cancelled since YATE started."
	::= { callEndCauseCounters 8 }

currentNoAnswerEndCause OBJECT-TYPE
	SYNTAX		Counter32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Number of calls ended because of no answer in the configured time interval."
	::= { callEndCauseCounters 9 }

overallNoAnswerEndCause OBJECT-TYPE
	SYNTAX		Counter32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Number of calls ended because of no answer since YATE started."
	::= { callEndCauseCounters 10 }

currentNoRouteEndCause OBJECT-TYPE
	SYNTAX		Counter32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Number of calls ended due to a lack of route in the configured time interval."
	::= { callEndCauseCounters 11 }

overallNoRouteEndCause OBJECT-TYPE
	SYNTAX		Counter32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Number of calls ended due to a lack of route since YATE started."
	::= { callEndCauseCounters 12 }

currentNoConnectionEndCause OBJECT-TYPE
	SYNTAX		Counter32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Number of calls ended with service unavailable in the configured time interval."
	::= { callEndCauseCounters 13 }

overallNoConnectionEndCause OBJECT-TYPE
	SYNTAX		Counter32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Number of calls ended with service unavailable since YATE started."
	::= { callEndCauseCounters 14 }

currentNoAuthEndCause OBJECT-TYPE
	SYNTAX		Counter32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Number of calls ended due to a lack of authorization in the configured time interval."
	::= { callEndCauseCounters 15 }

overallNoAuthEndCause OBJECT-TYPE
	SYNTAX		Counter32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Number of calls ended due to a lack of authorization since YATE started."
	::= { callEndCauseCounters 16 }

currentCongestionEndCause OBJECT-TYPE
	SYNTAX		Counter32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Number of calls ended with congestion in the configured time interval."
	::= { callEndCauseCounters 17 }

overallCongestionEndCause OBJECT-TYPE
	SYNTAX		Counter32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Number of calls ended due with congestion since YATE started."
	::= { callEndCauseCounters 18 }

currentNoMediaEndCause OBJECT-TYPE
	SYNTAX		Counter32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Number of calls ended with a no media reason in the configured time interval."
	::= { callEndCauseCounters 19 }

overallNoMediaEndCause OBJECT-TYPE
	SYNTAX		Counter32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Number of calls ended with a no media reason since YATE started."
	::= { callEndCauseCounters 20 }

-- serviceQuality END
-- calls END

-- database BEGIN

database  		OBJECT IDENTIFIER ::= { statistics 2 }

databaseCount  OBJECT-TYPE
	SYNTAX		Gauge32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Number of configured database accounts."
	::= { database 1 }

databaseTable  OBJECT-TYPE
	SYNTAX		SEQUENCE OF DatabaseEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION
		"Table containing service quality information about configured database accounts."
	::= { database 2 }

databaseEntry OBJECT-TYPE
	SYNTAX		DatabaseEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION
		"Table entry containing information about a database account."
	::= { databaseTable 1 }

DatabaseEntry ::= SEQUENCE {
	databaseIndex			Gauge32,
	databaseAccount			DisplayString,
	queriesCount			Counter32,
	failedQueries			Counter32,
	errorQueries			Counter32,
	queryExecTime			Gauge32,
	databaseAlarmCounters		DatabaseAlarmCounters,
	databaseThresholds		DatabaseThresholds
}

databaseIndex OBJECT-TYPE
	SYNTAX		Gauge32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The index of a database account."
	::= { databaseEntry 1 }

databaseAccount OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The name of a database account."
	::= { databaseEntry 2 }

queriesCount OBJECT-TYPE
	SYNTAX		Counter32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Number of queries requested to be executed in a configured time interval."
	::= { databaseEntry 3 }

failedQueries   OBJECT-TYPE
	SYNTAX		Counter32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Number of queries that failed to be executed in a configured time interval."
	::= { databaseEntry 4 }

errorQueries   OBJECT-TYPE
	SYNTAX		Counter32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Number of queries that return from execution with an error status in a configured time interval."
	::= { databaseEntry 5 }

queryExecTime  OBJECT-TYPE
	SYNTAX		Gauge32
	UNITS		"miliseconds"
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Report the average time spent executing a database query received in a configured time interval."
	::= { databaseEntry 6 }

databaseAlarmCounters OBJECT-TYPE
	SYNTAX		DatabaseAlarmCounters
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION
		"Alarm counters for this database account."
	::= { databaseEntry 7 }

DatabaseAlarmCounters ::= SEQUENCE {
	tooManyQueriesAlarms		Counter32,
	tooManyFailedQueriesAlarms	Counter32,
	tooManyErrorQueriesAlarms	Counter32,
	queryExecTooLongAlarms		Counter32,
	noConnectionAlarms		Counter32
}

tooManyQueriesAlarms OBJECT-TYPE
	SYNTAX 		Counter32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Number of times an alarm that signals that too many database queries were requested has been sent."
	::= { databaseAlarmCounters 1 }

tooManyFailedQueriesAlarms OBJECT-TYPE
	SYNTAX 		Counter32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Number of times an alarm that signals that too many database queries failed to be executed has been sent."
	::= { databaseAlarmCounters 2 }

tooManyErrorQueriesAlarms OBJECT-TYPE
	SYNTAX 		Counter32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Number of times an alarm that signals that too many database queries returned with an error status has been sent."
	::= { databaseAlarmCounters 3 }

queryExecTooLongAlarms  OBJECT-TYPE
	SYNTAX 		Counter32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Number of times an alarm that signals that a query is taking too long to be executed has been sent."
	::= { databaseAlarmCounters 4 }

noConnectionAlarms   OBJECT-TYPE
	SYNTAX 		Counter32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Number of times an alarm that signals that a connection to the database could not be established has been sent."
	::= { databaseAlarmCounters 5 }

databaseThresholds  OBJECT-TYPE
	SYNTAX		DatabaseThresholds
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION
		"Alarm thresholds for this database account."
	::= { databaseEntry 8 }

DatabaseThresholds ::= SEQUENCE {
	queriesCountThreshold		Gauge32,
	failedQueriesThreshold		Gauge32,
	errorQueriesThreshold		Gauge32,
	queryExecTimeThreshold		Gauge32
}

queriesCountThreshold OBJECT-TYPE
	SYNTAX 		Gauge32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Threshold for triggering a alarm that too many queries were requested to be executed."
	::= { databaseThresholds 1 }

failedQueriesThreshold OBJECT-TYPE
	SYNTAX 		Gauge32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Threshold for triggering a alarm that too many queries failed to be executed."
	::= { databaseThresholds 2 }

errorQueriesThreshold OBJECT-TYPE
	SYNTAX 		Gauge32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Threshold for triggering a alarm that too many queries returned with an error."
	::= { databaseThresholds 3 }

queryExecTimeThreshold OBJECT-TYPE
	SYNTAX 		Gauge32
	UNITS		"miliseconds"
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Threshold for triggering a alarm that queries take too long to be executed."
	::= { databaseThresholds 4 }

-- database END
-- rtp BEGIN

rtpData			OBJECT IDENTIFIER ::= { statistics 3}

rtpDirectionsCount OBJECT-TYPE
	SYNTAX		Gauge32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Number of RTP directions."
	::= { rtpData 1 }

rtpDirectionsTable   OBJECT-TYPE
	SYNTAX		SEQUENCE OF RTPEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION
		"Table containing information about RTP directions."
	::= { rtpData 2 }

rtpEntry OBJECT-TYPE
	SYNTAX		RTPEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION
		"Table entry containing information about an account."
	::= { rtpDirectionsTable 1 }

RTPEntry ::= SEQUENCE {
	rtpEntryIndex		Gauge32,
	rtpDirection		DisplayString,
	noAudioCounter		Counter32,
	lostAudioCounter	Counter32,
	packetsLost		Counter32,
	syncLost		Counter32,
	sequenceNumberLost	Counter32,
	wrongSRC		Counter32,
	wrongSSRC		Counter32
}

rtpEntryIndex  OBJECT-TYPE
	SYNTAX		Gauge32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Index of the RTP direction in the table."
	::= { rtpEntry 1 }

rtpDirection  OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The name for the RTP direction."
	::= { rtpEntry 2 }

noAudioCounter OBJECT-TYPE
	SYNTAX		Counter32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Number of times lack of audio has been detected on RTP."
	::= { rtpEntry 3 }

lostAudioCounter OBJECT-TYPE
	SYNTAX		Counter32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Number of times a loss of audio has been detected on RTP."
	::= { rtpEntry 4 }

packetsLost OBJECT-TYPE
	SYNTAX		Counter32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Number of RTP packets lost."
	::= { rtpEntry 5 }

syncLost OBJECT-TYPE
	SYNTAX		Counter32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Number of times synchronization has been lost on RTP."
	::= { rtpEntry 6 }

sequenceNumberLost  OBJECT-TYPE
	SYNTAX		Counter32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Number of times the sequence number has been lost on RTP."
	::= { rtpEntry 7 }

wrongSRC  OBJECT-TYPE
	SYNTAX		Counter32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Number of received RTP packets with wrong SRC in packet."
	::= { rtpEntry 8 }

wrongSSRC OBJECT-TYPE
	SYNTAX		Counter32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Number of received RTP packets with wrong SSRC in packet."
	::= { rtpEntry 9 }

-- rtp END
-- requests BEGIN

requests 		OBJECT IDENTIFIER ::= { statistics 4 }

authenticationRequests  OBJECT-TYPE
	SYNTAX		Counter32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Number of received authentication requests."
	::= { requests 1 }

registerRequests  OBJECT-TYPE
	SYNTAX		Counter32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Number of received register requests."
	::= { requests 2 }

-- requests END
-- statistics END

-- alarms BEGIN

-- databaseAlarms BEGIN

databaseAlarms		OBJECT IDENTIFIER ::= { alarms 1 }

tooManyQueries   OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS	accessible-for-notify
	STATUS		current
	DESCRIPTION
		"Notification that signals that the number of queries requested to be executed
			in a set time interval surpassed a configured threshold."
	::= { databaseAlarms 1 }

tooManyFailedQueries OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS	accessible-for-notify
	STATUS		current
	DESCRIPTION
		"Notification that signals that the number of queries that could not be executed
			in a set time interval surpassed a configured threshold."
	::= { databaseAlarms 2 }

tooManyErrorQueries  OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS	accessible-for-notify
	STATUS		current
	DESCRIPTION
		"Notification that signals that the number of queries that returned with an error status
			in a set time interval surpassed a configured threshold."
	::= { databaseAlarms 3 }

queryExecTimeTooLong OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS	accessible-for-notify
	STATUS		current
	DESCRIPTION
		"Notification that signals that the average time for executing a query has surpassed
			a configured threshold."
	::= { databaseAlarms 4 }

noConnection OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS	accessible-for-notify
	STATUS		current
	DESCRIPTION
		"Notify that Yate has failed to establish a connection to this database."
	::= { databaseAlarms 5 }

-- databaseAlarms END

-- serviceQualityAlarms BEGIN

serviceQualityAlarms 		OBJECT IDENTIFIER ::= { alarms 2 }

asrAlarms			OBJECT IDENTIFIER ::= { serviceQualityAlarms 1 }

lowASRAlarms			OBJECT IDENTIFIER ::= { asrAlarms 1 }

currentLowASR OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS	accessible-for-notify
	STATUS		current
	DESCRIPTION
		"Alarm that signals that the ASR value is below a set threshold for a configured time interval."
	::= { lowASRAlarms 1 }

overallLowASR OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS	accessible-for-notify
	STATUS		current
	DESCRIPTION
		"Alarm that signals that the ASR value since Yate started is below a set threshold."
	::= { lowASRAlarms 2 }

highASRAlarms			OBJECT IDENTIFIER ::= { asrAlarms 2 }

currentHighASR OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS	accessible-for-notify
	STATUS		current
	DESCRIPTION
		"Alarm that signals that the ASR value for a configured time interval has surpassed a set threshold."
	::= { highASRAlarms 1 }

overallHighASR OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS	accessible-for-notify
	STATUS		current
	DESCRIPTION
		"Alarm that signals that the overall ASR value has surpassed a set threshold."
	::= { highASRAlarms 2 }

lowNERAlarms			OBJECT IDENTIFIER ::= { serviceQualityAlarms 2 }

currentLowNER OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS	accessible-for-notify
	STATUS		current
	DESCRIPTION
		"Alarm that signals that the NER value for a configured time interval is below a set threshold."
	::= { lowNERAlarms 1 }

overallLowNER OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS	accessible-for-notify
	STATUS		current
	DESCRIPTION
		"Alarm that signals that the overall NER value is below a set threshold."
	::= { lowNERAlarms 2 }

-- serviceQualityAlarms END

-- connectionAlarms BEGIN

connectionAlarms		OBJECT IDENTIFIER ::= { alarms 3 }

trunkDown OBJECT-TYPE
	SYNTAX 		DisplayString
	MAX-ACCESS	accessible-for-notify
	STATUS		current
	DESCRIPTION
		"Notification that this trunk is down."
	::= { connectionAlarms 1 }

trunkUp OBJECT-TYPE
	SYNTAX 		DisplayString
	MAX-ACCESS	accessible-for-notify
	STATUS		current
	DESCRIPTION
		"Notification that this trunk is up."
	::= { connectionAlarms 2 }

linksetDown OBJECT-TYPE
	SYNTAX 		DisplayString
	MAX-ACCESS	accessible-for-notify
	STATUS		current
	DESCRIPTION
		"Notification that this linkset component is down."
	::= { connectionAlarms 3 }

linksetUp OBJECT-TYPE
	SYNTAX 		DisplayString
	MAX-ACCESS	accessible-for-notify
	STATUS		current
	DESCRIPTION
		"Notification that this linkset component is up."
	::= { connectionAlarms 4 }

linkDown OBJECT-TYPE
	SYNTAX 		DisplayString
	MAX-ACCESS	accessible-for-notify
	STATUS		current
	DESCRIPTION
		"Notification that this link is down."
	::= { connectionAlarms 5 }

linkUp OBJECT-TYPE
	SYNTAX 		DisplayString
	MAX-ACCESS	accessible-for-notify
	STATUS		current
	DESCRIPTION
		"Notification that this link is up."
	::= { connectionAlarms 6 }

interfaceDown OBJECT-TYPE
	SYNTAX 		DisplayString
	MAX-ACCESS	accessible-for-notify
	STATUS		current
	DESCRIPTION
		"Notification that signals that this interface is down."
	::= { connectionAlarms 7 }

interfaceUp OBJECT-TYPE
	SYNTAX 		DisplayString
	MAX-ACCESS	accessible-for-notify
	STATUS		current
	DESCRIPTION
		"Notification that signals that this interface is up."
	::= { connectionAlarms 8 }

isdnQ921Down OBJECT-TYPE
	SYNTAX 		DisplayString
	MAX-ACCESS	accessible-for-notify
	STATUS		current
	DESCRIPTION
		"Notification that this ISDN Q921 component is down."
	::= { connectionAlarms 9 }

isdnQ921Up OBJECT-TYPE
	SYNTAX 		DisplayString
	MAX-ACCESS	accessible-for-notify
	STATUS		current
	DESCRIPTION
		"Notification that this ISDN Q921 component is up."
	::= { connectionAlarms 10 }

routeDown OBJECT-TYPE
	SYNTAX 		DisplayString
	MAX-ACCESS	accessible-for-notify
	STATUS		current
	DESCRIPTION
		"Notification that this route is down."
	::= { connectionAlarms 11 }

routeUp OBJECT-TYPE
	SYNTAX 		DisplayString
	MAX-ACCESS	accessible-for-notify
	STATUS		current
	DESCRIPTION
		"Notification that this route is up."
	::= { connectionAlarms 12 }

-- connectionAlarms END

-- sipAlarms BEGIN

sipAlarms		OBJECT IDENTIFIER ::= { alarms 4 }

transactionsTimedOut OBJECT-TYPE
	SYNTAX 		Counter32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Number of SIP transactions that have timed out."
	::= { sipAlarms 1 }

failedAuths OBJECT-TYPE
	SYNTAX 		Counter32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Number of failed SIP authentications."
	::= { sipAlarms 2 }

byesTimedOut OBJECT-TYPE
	SYNTAX 		Counter32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Number of BYE tranctions that timed out."
	::= { sipAlarms 3 }

gatewayAlarms 		OBJECT IDENTIFIER ::= { sipAlarms 4 }

gatewayTimeout OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS 	accessible-for-notify
	STATUS		current
	DESCRIPTION
		"Notify that a monitored SIP gateway timed out."
	::= { gatewayAlarms 1 }

gatewayUp OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS	accessible-for-notify
	STATUS		current
	DESCRIPTION
		"Notify that a previously timed out SIP gateway went back online."
	::= { gatewayAlarms 2 }

-- sipAlarms END
-- mgcpAlarms BEGIN

mgcpAlarms		OBJECT IDENTIFIER ::= { alarms 5 }

mgcpTransactionsTimedOut OBJECT-TYPE
	SYNTAX 		Counter32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Number of MGCP transactions that have timed out."
	::= { mgcpAlarms 1 }

deleteTransactionsTimedOut OBJECT-TYPE
	SYNTAX 		Counter32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Number of DELETE transactions that have timed out."
	::= { mgcpAlarms 2 }

mgcpGatewayTimedOut OBJECT-TYPE
	SYNTAX 		DisplayString
	MAX-ACCESS	accessible-for-notify
	STATUS		current
	DESCRIPTION
		"Notify that this MGCP gateway has timed out."
	::= { mgcpAlarms 3 }

mgcpGatewayUp OBJECT-TYPE
	SYNTAX 		DisplayString
	MAX-ACCESS	accessible-for-notify
	STATUS		current
	DESCRIPTION
		"Notify that this MGCP gateway is online."
	::= { mgcpAlarms 4 }

-- mgcpAlarms END

-- engineAlarms BEGIN

engineAlarms		OBJECT IDENTIFIER ::= { alarms 6 }

unexpectedRestart OBJECT-TYPE
	SYNTAX 		Integer32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Signal code that caused last YATE restart."
	::= { engineAlarms 1 }

-- engineAlarms END

genericAlarms		OBJECT IDENTIFIER ::= { alarms 7 }

genericAlarm NOTIFICATION-TYPE
	OBJECTS { alarmSource, alarmLevel, alarmText }
	STATUS		current
	DESCRIPTION
		"A generic YATE alarm."
	::= { genericAlarms 1 }

alarmSource OBJECT-TYPE
	SYNTAX 		DisplayString
	MAX-ACCESS	accessible-for-notify
	STATUS		current
	DESCRIPTION
		"Component that generated the alarm."
	::= { genericAlarms 2 }

alarmLevel OBJECT-TYPE
	SYNTAX 		DisplayString
	MAX-ACCESS	accessible-for-notify
	STATUS		current
	DESCRIPTION
		"Short textual level of the alarm."
	::= { genericAlarms 3 }

alarmText OBJECT-TYPE
	SYNTAX 		DisplayString
	MAX-ACCESS	accessible-for-notify
	STATUS		current
	DESCRIPTION
		"Long text description of the alarm."
	::= { genericAlarms 4 }

alarmInfo OBJECT-TYPE
	SYNTAX 		DisplayString
	MAX-ACCESS	accessible-for-notify
	STATUS		current
	DESCRIPTION
		"Optional extra information about the alarm category."
	::= { genericAlarms 5 }

-- genericAlarms END

specificAlarm NOTIFICATION-TYPE
	STATUS		current
	DESCRIPTION
		"Specific alarms generated by YATE, see the optional objects for each alarm"
	::= { alarms 8 }

-- alarms END


-- commands BEGIN

enableTrap OBJECT-TYPE
	SYNTAX		OBJECT IDENTIFIER
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION
		"Activate the trap with the given object identifier."
	::= { commands 1 }

disableTrap OBJECT-TYPE
	SYNTAX		OBJECT IDENTIFIER
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION
		"Deactivate trap with the given object identifier."
	::= { commands 2 }

-- yateCommands END

END