# Makefile.in generated by automake 1.15.1 from Makefile.am.
# @configure_input@

# Copyright (C) 1994-2017 Free Software Foundation, Inc.

# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@
VPATH = @srcdir@
am__is_gnu_make = { \
  if test -z '$(MAKELEVEL)'; then \
    false; \
  elif test -n '$(MAKE_HOST)'; then \
    true; \
  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
    true; \
  else \
    false; \
  fi; \
}
am__make_running_with_option = \
  case $${target_option-} in \
      ?) ;; \
      *) echo "am__make_running_with_option: internal error: invalid" \
              "target option '$${target_option-}' specified" >&2; \
         exit 1;; \
  esac; \
  has_opt=no; \
  sane_makeflags=$$MAKEFLAGS; \
  if $(am__is_gnu_make); then \
    sane_makeflags=$$MFLAGS; \
  else \
    case $$MAKEFLAGS in \
      *\\[\ \	]*) \
        bs=\\; \
        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
    esac; \
  fi; \
  skip_next=no; \
  strip_trailopt () \
  { \
    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
  }; \
  for flg in $$sane_makeflags; do \
    test $$skip_next = yes && { skip_next=no; continue; }; \
    case $$flg in \
      *=*|--*) continue;; \
        -*I) strip_trailopt 'I'; skip_next=yes;; \
      -*I?*) strip_trailopt 'I';; \
        -*O) strip_trailopt 'O'; skip_next=yes;; \
      -*O?*) strip_trailopt 'O';; \
        -*l) strip_trailopt 'l'; skip_next=yes;; \
      -*l?*) strip_trailopt 'l';; \
      -[dEDm]) skip_next=yes;; \
      -[JT]) skip_next=yes;; \
    esac; \
    case $$flg in \
      *$$target_option*) has_opt=yes; break;; \
    esac; \
  done; \
  test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
@USE_DOCBOOK2X_TRUE@am__append_1 = ja ko
@ENABLE_API_DOCS_TRUE@am__append_2 = api
@ENABLE_DEPRECATED_TRUE@@ENABLE_DOCBOOK_TRUE@am__append_3 = lxc-clone.1
@ENABLE_DEPRECATED_TRUE@@ENABLE_DOCBOOK_TRUE@@ENABLE_PYTHON_TRUE@am__append_4 = lxc-start-ephemeral.1
subdir = doc
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/config/acinclude.m4 \
	$(top_srcdir)/config/libtool.m4 \
	$(top_srcdir)/config/ltoptions.m4 \
	$(top_srcdir)/config/ltsugar.m4 \
	$(top_srcdir)/config/ltversion.m4 \
	$(top_srcdir)/config/lt~obsolete.m4 \
	$(top_srcdir)/config/tls.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/src/config.h
CONFIG_CLEAN_FILES = lxc-attach.sgml lxc-autostart.sgml \
	lxc-cgroup.sgml lxc-checkconfig.sgml lxc-checkpoint.sgml \
	lxc-clone.sgml lxc-config.sgml lxc-console.sgml lxc-copy.sgml \
	lxc-create.sgml lxc-destroy.sgml lxc-device.sgml \
	lxc-execute.sgml lxc-freeze.sgml lxc-info.sgml lxc-ls.sgml \
	lxc-monitor.sgml lxc-snapshot.sgml lxc-start-ephemeral.sgml \
	lxc-start.sgml lxc-stop.sgml lxc-top.sgml lxc-unfreeze.sgml \
	lxc-unshare.sgml lxc-update-config.sgml lxc-user-nic.sgml \
	lxc-usernsexec.sgml lxc-wait.sgml lxc.conf.sgml \
	lxc.container.conf.sgml lxc.system.conf.sgml lxc-usernet.sgml \
	lxc.sgml common_options.sgml see_also.sgml
CONFIG_CLEAN_VPATH_FILES =
AM_V_P = $(am__v_P_@AM_V@)
am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_@AM_V@)
am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
am__v_GEN_0 = @echo "  GEN     " $@;
am__v_GEN_1 = 
AM_V_at = $(am__v_at_@AM_V@)
am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
am__v_at_0 = @
am__v_at_1 = 
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
	ctags-recursive dvi-recursive html-recursive info-recursive \
	install-data-recursive install-dvi-recursive \
	install-exec-recursive install-html-recursive \
	install-info-recursive install-pdf-recursive \
	install-ps-recursive install-recursive installcheck-recursive \
	installdirs-recursive pdf-recursive ps-recursive \
	tags-recursive uninstall-recursive
am__can_run_installinfo = \
  case $$AM_UPDATE_INFO_DIR in \
    n|no|NO) false;; \
    *) (install-info --version) >/dev/null 2>&1;; \
  esac
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
  for p in $$list; do echo "$$p $$p"; done | \
  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
    if (++n[$$2] == $(am__install_max)) \
      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
    END { for (dir in files) print dir, files[dir] }'
am__base_list = \
  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__uninstall_files_from_dir = { \
  test -z "$$files" \
    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
         $(am__cd) "$$dir" && rm -f $$files; }; \
  }
man1dir = $(mandir)/man1
am__installdirs = "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(man5dir)" \
	"$(DESTDIR)$(man7dir)"
man5dir = $(mandir)/man5
man7dir = $(mandir)/man7
NROFF = nroff
MANS = $(man_MANS)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
  distclean-recursive maintainer-clean-recursive
am__recursive_targets = \
  $(RECURSIVE_TARGETS) \
  $(RECURSIVE_CLEAN_TARGETS) \
  $(am__extra_recursive_targets)
AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
	distdir
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
# Read a list of newline-separated strings from the standard input,
# and print each of them once, without duplicates.  Input order is
# *not* preserved.
am__uniquify_input = $(AWK) '\
  BEGIN { nonempty = 0; } \
  { items[$$0] = 1; nonempty = 1; } \
  END { if (nonempty) { for (i in items) print i; }; } \
'
# Make sure the list of sources is unique.  This is necessary because,
# e.g., the same source file might be shared among _SOURCES variables
# for different programs/libraries.
am__define_uniq_tagged_files = \
  list='$(am__tagged_files)'; \
  unique=`for i in $$list; do \
    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
  done | $(am__uniquify_input)`
ETAGS = etags
CTAGS = ctags
am__DIST_COMMON = $(srcdir)/Makefile.in \
	$(srcdir)/common_options.sgml.in $(srcdir)/lxc-attach.sgml.in \
	$(srcdir)/lxc-autostart.sgml.in $(srcdir)/lxc-cgroup.sgml.in \
	$(srcdir)/lxc-checkconfig.sgml.in \
	$(srcdir)/lxc-checkpoint.sgml.in $(srcdir)/lxc-clone.sgml.in \
	$(srcdir)/lxc-config.sgml.in $(srcdir)/lxc-console.sgml.in \
	$(srcdir)/lxc-copy.sgml.in $(srcdir)/lxc-create.sgml.in \
	$(srcdir)/lxc-destroy.sgml.in $(srcdir)/lxc-device.sgml.in \
	$(srcdir)/lxc-execute.sgml.in $(srcdir)/lxc-freeze.sgml.in \
	$(srcdir)/lxc-info.sgml.in $(srcdir)/lxc-ls.sgml.in \
	$(srcdir)/lxc-monitor.sgml.in $(srcdir)/lxc-snapshot.sgml.in \
	$(srcdir)/lxc-start-ephemeral.sgml.in \
	$(srcdir)/lxc-start.sgml.in $(srcdir)/lxc-stop.sgml.in \
	$(srcdir)/lxc-top.sgml.in $(srcdir)/lxc-unfreeze.sgml.in \
	$(srcdir)/lxc-unshare.sgml.in \
	$(srcdir)/lxc-update-config.sgml.in \
	$(srcdir)/lxc-user-nic.sgml.in $(srcdir)/lxc-usernet.sgml.in \
	$(srcdir)/lxc-usernsexec.sgml.in $(srcdir)/lxc-wait.sgml.in \
	$(srcdir)/lxc.conf.sgml.in \
	$(srcdir)/lxc.container.conf.sgml.in $(srcdir)/lxc.sgml.in \
	$(srcdir)/lxc.system.conf.sgml.in $(srcdir)/see_also.sgml.in
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
am__relativize = \
  dir0=`pwd`; \
  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
  sed_rest='s,^[^/]*/*,,'; \
  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
  sed_butlast='s,/*[^/]*$$,,'; \
  while test -n "$$dir1"; do \
    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
    if test "$$first" != "."; then \
      if test "$$first" = ".."; then \
        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
      else \
        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
        if test "$$first2" = "$$first"; then \
          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
        else \
          dir2="../$$dir2"; \
        fi; \
        dir0="$$dir0"/"$$first"; \
      fi; \
    fi; \
    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
  done; \
  reldir="$$dir2"
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
APPARMOR_LIBS = @APPARMOR_LIBS@
AR = @AR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
BINDIR = @BINDIR@
CAP_LIBS = @CAP_LIBS@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CGMANAGER_CFLAGS = @CGMANAGER_CFLAGS@
CGMANAGER_LIBS = @CGMANAGER_LIBS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CYGPATH_W = @CYGPATH_W@
DATADIR = @DATADIR@
DBUS_CFLAGS = @DBUS_CFLAGS@
DBUS_LIBS = @DBUS_LIBS@
DEFAULT_CGROUP_PATTERN = @DEFAULT_CGROUP_PATTERN@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DLLTOOL = @DLLTOOL@
DOCDIR = @DOCDIR@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
FGREP = @FGREP@
GNUTLS_LIBS = @GNUTLS_LIBS@
GREP = @GREP@
HAVE_DOXYGEN = @HAVE_DOXYGEN@
INCLUDEDIR = @INCLUDEDIR@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LD = @LD@
LDFLAGS = @LDFLAGS@
LIBDIR = @LIBDIR@
LIBEXECDIR = @LIBEXECDIR@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LIBTOOL_DEPS = @LIBTOOL_DEPS@
LIPO = @LIPO@
LN_S = @LN_S@
LOCALSTATEDIR = @LOCALSTATEDIR@
LOGPATH = @LOGPATH@
LTLIBOBJS = @LTLIBOBJS@
LUA_CFLAGS = @LUA_CFLAGS@
LUA_LIBDIR = @LUA_LIBDIR@
LUA_LIBS = @LUA_LIBS@
LUA_SHAREDIR = @LUA_SHAREDIR@
LUA_VERSION = @LUA_VERSION@
LXCBINHOOKDIR = @LXCBINHOOKDIR@
LXCHOOKDIR = @LXCHOOKDIR@
LXCINITDIR = @LXCINITDIR@
LXCPATH = @LXCPATH@
LXCROOTFSMOUNT = @LXCROOTFSMOUNT@
LXCTEMPLATECONFIG = @LXCTEMPLATECONFIG@
LXCTEMPLATEDIR = @LXCTEMPLATEDIR@
LXC_ABI = @LXC_ABI@
LXC_ABI_MAJOR = @LXC_ABI_MAJOR@
LXC_ABI_MICRO = @LXC_ABI_MICRO@
LXC_ABI_MINOR = @LXC_ABI_MINOR@
LXC_DEFAULT_CONFIG = @LXC_DEFAULT_CONFIG@
LXC_DEVEL = @LXC_DEVEL@
LXC_DISTRO_SYSCONF = @LXC_DISTRO_SYSCONF@
LXC_GENERATE_DATE = @LXC_GENERATE_DATE@
LXC_GLOBAL_CONF = @LXC_GLOBAL_CONF@
LXC_USERNIC_CONF = @LXC_USERNIC_CONF@
LXC_USERNIC_DB = @LXC_USERNIC_DB@
LXC_VERSION = @LXC_VERSION@
LXC_VERSION_BASE = @LXC_VERSION_BASE@
LXC_VERSION_BETA = @LXC_VERSION_BETA@
LXC_VERSION_MAJOR = @LXC_VERSION_MAJOR@
LXC_VERSION_MICRO = @LXC_VERSION_MICRO@
LXC_VERSION_MINOR = @LXC_VERSION_MINOR@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
MKDIR_P = @MKDIR_P@
NIH_CFLAGS = @NIH_CFLAGS@
NIH_DBUS_CFLAGS = @NIH_DBUS_CFLAGS@
NIH_DBUS_LIBS = @NIH_DBUS_LIBS@
NIH_LIBS = @NIH_LIBS@
NM = @NM@
NMEDIT = @NMEDIT@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PKG_CONFIG = @PKG_CONFIG@
PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
PREFIX = @PREFIX@
PYTHON = @PYTHON@
PYTHONDEV_CFLAGS = @PYTHONDEV_CFLAGS@
PYTHONDEV_LIBS = @PYTHONDEV_LIBS@
PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@
PYTHON_PLATFORM = @PYTHON_PLATFORM@
PYTHON_PREFIX = @PYTHON_PREFIX@
PYTHON_VERSION = @PYTHON_VERSION@
RANLIB = @RANLIB@
RUNTIME_PATH = @RUNTIME_PATH@
SBINDIR = @SBINDIR@
SECCOMP_CFLAGS = @SECCOMP_CFLAGS@
SECCOMP_LIBS = @SECCOMP_LIBS@
SED = @SED@
SELINUX_LIBS = @SELINUX_LIBS@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
SYSCONFDIR = @SYSCONFDIR@
SYSTEMD_UNIT_DIR = @SYSTEMD_UNIT_DIR@
VERSION = @VERSION@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bashcompdir = @bashcompdir@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
db2xman = @db2xman@
docdir = @docdir@
docdtd = @docdtd@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
pkgpyexecdir = @pkgpyexecdir@
pkgpythondir = @pkgpythondir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
pyexecdir = @pyexecdir@
pythondir = @pythondir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
SUBDIRS = examples rootfs $(am__append_1) $(am__append_2)
DIST_SUBDIRS = examples rootfs ja ko api
EXTRA_DIST = \
	lxc.container.conf \
	lxc.system.conf \
	FAQ.txt

@ENABLE_DOCBOOK_TRUE@man_MANS = lxc-attach.1 lxc-autostart.1 \
@ENABLE_DOCBOOK_TRUE@	lxc-cgroup.1 lxc-checkconfig.1 \
@ENABLE_DOCBOOK_TRUE@	lxc-checkpoint.1 lxc-config.1 \
@ENABLE_DOCBOOK_TRUE@	lxc-console.1 lxc-copy.1 lxc-create.1 \
@ENABLE_DOCBOOK_TRUE@	lxc-destroy.1 lxc-device.1 lxc-execute.1 \
@ENABLE_DOCBOOK_TRUE@	lxc-freeze.1 lxc-info.1 lxc-ls.1 \
@ENABLE_DOCBOOK_TRUE@	lxc-monitor.1 lxc-snapshot.1 lxc-start.1 \
@ENABLE_DOCBOOK_TRUE@	lxc-stop.1 lxc-top.1 lxc-unfreeze.1 \
@ENABLE_DOCBOOK_TRUE@	lxc-unshare.1 lxc-update-config.1 \
@ENABLE_DOCBOOK_TRUE@	lxc-user-nic.1 lxc-usernsexec.1 \
@ENABLE_DOCBOOK_TRUE@	lxc-wait.1 lxc.conf.5 \
@ENABLE_DOCBOOK_TRUE@	lxc.container.conf.5 lxc.system.conf.5 \
@ENABLE_DOCBOOK_TRUE@	lxc-usernet.5 lxc.7 $(am__append_3) \
@ENABLE_DOCBOOK_TRUE@	$(am__append_4)
all: all-recursive

.SUFFIXES:
$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
	        && { if test -f $@; then exit 0; else break; fi; }; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --gnu doc/Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure:  $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):
lxc-attach.sgml: $(top_builddir)/config.status $(srcdir)/lxc-attach.sgml.in
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
lxc-autostart.sgml: $(top_builddir)/config.status $(srcdir)/lxc-autostart.sgml.in
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
lxc-cgroup.sgml: $(top_builddir)/config.status $(srcdir)/lxc-cgroup.sgml.in
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
lxc-checkconfig.sgml: $(top_builddir)/config.status $(srcdir)/lxc-checkconfig.sgml.in
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
lxc-checkpoint.sgml: $(top_builddir)/config.status $(srcdir)/lxc-checkpoint.sgml.in
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
lxc-clone.sgml: $(top_builddir)/config.status $(srcdir)/lxc-clone.sgml.in
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
lxc-config.sgml: $(top_builddir)/config.status $(srcdir)/lxc-config.sgml.in
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
lxc-console.sgml: $(top_builddir)/config.status $(srcdir)/lxc-console.sgml.in
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
lxc-copy.sgml: $(top_builddir)/config.status $(srcdir)/lxc-copy.sgml.in
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
lxc-create.sgml: $(top_builddir)/config.status $(srcdir)/lxc-create.sgml.in
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
lxc-destroy.sgml: $(top_builddir)/config.status $(srcdir)/lxc-destroy.sgml.in
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
lxc-device.sgml: $(top_builddir)/config.status $(srcdir)/lxc-device.sgml.in
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
lxc-execute.sgml: $(top_builddir)/config.status $(srcdir)/lxc-execute.sgml.in
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
lxc-freeze.sgml: $(top_builddir)/config.status $(srcdir)/lxc-freeze.sgml.in
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
lxc-info.sgml: $(top_builddir)/config.status $(srcdir)/lxc-info.sgml.in
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
lxc-ls.sgml: $(top_builddir)/config.status $(srcdir)/lxc-ls.sgml.in
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
lxc-monitor.sgml: $(top_builddir)/config.status $(srcdir)/lxc-monitor.sgml.in
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
lxc-snapshot.sgml: $(top_builddir)/config.status $(srcdir)/lxc-snapshot.sgml.in
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
lxc-start-ephemeral.sgml: $(top_builddir)/config.status $(srcdir)/lxc-start-ephemeral.sgml.in
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
lxc-start.sgml: $(top_builddir)/config.status $(srcdir)/lxc-start.sgml.in
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
lxc-stop.sgml: $(top_builddir)/config.status $(srcdir)/lxc-stop.sgml.in
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
lxc-top.sgml: $(top_builddir)/config.status $(srcdir)/lxc-top.sgml.in
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
lxc-unfreeze.sgml: $(top_builddir)/config.status $(srcdir)/lxc-unfreeze.sgml.in
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
lxc-unshare.sgml: $(top_builddir)/config.status $(srcdir)/lxc-unshare.sgml.in
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
lxc-update-config.sgml: $(top_builddir)/config.status $(srcdir)/lxc-update-config.sgml.in
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
lxc-user-nic.sgml: $(top_builddir)/config.status $(srcdir)/lxc-user-nic.sgml.in
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
lxc-usernsexec.sgml: $(top_builddir)/config.status $(srcdir)/lxc-usernsexec.sgml.in
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
lxc-wait.sgml: $(top_builddir)/config.status $(srcdir)/lxc-wait.sgml.in
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
lxc.conf.sgml: $(top_builddir)/config.status $(srcdir)/lxc.conf.sgml.in
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
lxc.container.conf.sgml: $(top_builddir)/config.status $(srcdir)/lxc.container.conf.sgml.in
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
lxc.system.conf.sgml: $(top_builddir)/config.status $(srcdir)/lxc.system.conf.sgml.in
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
lxc-usernet.sgml: $(top_builddir)/config.status $(srcdir)/lxc-usernet.sgml.in
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
lxc.sgml: $(top_builddir)/config.status $(srcdir)/lxc.sgml.in
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
common_options.sgml: $(top_builddir)/config.status $(srcdir)/common_options.sgml.in
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
see_also.sgml: $(top_builddir)/config.status $(srcdir)/see_also.sgml.in
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs
install-man1: $(man_MANS)
	@$(NORMAL_INSTALL)
	@list1=''; \
	list2='$(man_MANS)'; \
	test -n "$(man1dir)" \
	  && test -n "`echo $$list1$$list2`" \
	  || exit 0; \
	echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
	$(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
	{ for i in $$list1; do echo "$$i"; done;  \
	if test -n "$$list2"; then \
	  for i in $$list2; do echo "$$i"; done \
	    | sed -n '/\.1[a-z]*$$/p'; \
	fi; \
	} | while read p; do \
	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; echo "$$p"; \
	done | \
	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
	sed 'N;N;s,\n, ,g' | { \
	list=; while read file base inst; do \
	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
	  fi; \
	done; \
	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
	while read files; do \
	  test -z "$$files" || { \
	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
	done; }

uninstall-man1:
	@$(NORMAL_UNINSTALL)
	@list=''; test -n "$(man1dir)" || exit 0; \
	files=`{ for i in $$list; do echo "$$i"; done; \
	l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
	  sed -n '/\.1[a-z]*$$/p'; \
	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
	dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
install-man5: $(man_MANS)
	@$(NORMAL_INSTALL)
	@list1=''; \
	list2='$(man_MANS)'; \
	test -n "$(man5dir)" \
	  && test -n "`echo $$list1$$list2`" \
	  || exit 0; \
	echo " $(MKDIR_P) '$(DESTDIR)$(man5dir)'"; \
	$(MKDIR_P) "$(DESTDIR)$(man5dir)" || exit 1; \
	{ for i in $$list1; do echo "$$i"; done;  \
	if test -n "$$list2"; then \
	  for i in $$list2; do echo "$$i"; done \
	    | sed -n '/\.5[a-z]*$$/p'; \
	fi; \
	} | while read p; do \
	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; echo "$$p"; \
	done | \
	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^5][0-9a-z]*$$,5,;x' \
	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
	sed 'N;N;s,\n, ,g' | { \
	list=; while read file base inst; do \
	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man5dir)/$$inst'"; \
	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man5dir)/$$inst" || exit $$?; \
	  fi; \
	done; \
	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
	while read files; do \
	  test -z "$$files" || { \
	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man5dir)'"; \
	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man5dir)" || exit $$?; }; \
	done; }

uninstall-man5:
	@$(NORMAL_UNINSTALL)
	@list=''; test -n "$(man5dir)" || exit 0; \
	files=`{ for i in $$list; do echo "$$i"; done; \
	l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
	  sed -n '/\.5[a-z]*$$/p'; \
	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^5][0-9a-z]*$$,5,;x' \
	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
	dir='$(DESTDIR)$(man5dir)'; $(am__uninstall_files_from_dir)
install-man7: $(man_MANS)
	@$(NORMAL_INSTALL)
	@list1=''; \
	list2='$(man_MANS)'; \
	test -n "$(man7dir)" \
	  && test -n "`echo $$list1$$list2`" \
	  || exit 0; \
	echo " $(MKDIR_P) '$(DESTDIR)$(man7dir)'"; \
	$(MKDIR_P) "$(DESTDIR)$(man7dir)" || exit 1; \
	{ for i in $$list1; do echo "$$i"; done;  \
	if test -n "$$list2"; then \
	  for i in $$list2; do echo "$$i"; done \
	    | sed -n '/\.7[a-z]*$$/p'; \
	fi; \
	} | while read p; do \
	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; echo "$$p"; \
	done | \
	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^7][0-9a-z]*$$,7,;x' \
	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
	sed 'N;N;s,\n, ,g' | { \
	list=; while read file base inst; do \
	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man7dir)/$$inst'"; \
	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man7dir)/$$inst" || exit $$?; \
	  fi; \
	done; \
	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
	while read files; do \
	  test -z "$$files" || { \
	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man7dir)'"; \
	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man7dir)" || exit $$?; }; \
	done; }

uninstall-man7:
	@$(NORMAL_UNINSTALL)
	@list=''; test -n "$(man7dir)" || exit 0; \
	files=`{ for i in $$list; do echo "$$i"; done; \
	l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
	  sed -n '/\.7[a-z]*$$/p'; \
	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^7][0-9a-z]*$$,7,;x' \
	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
	dir='$(DESTDIR)$(man7dir)'; $(am__uninstall_files_from_dir)

# This directory's subdirectories are mostly independent; you can cd
# into them and run 'make' without going through this Makefile.
# To change the values of 'make' variables: instead of editing Makefiles,
# (1) if the variable is set in 'config.status', edit 'config.status'
#     (which will cause the Makefiles to be regenerated when you run 'make');
# (2) otherwise, pass the desired values on the 'make' command line.
$(am__recursive_targets):
	@fail=; \
	if $(am__make_keepgoing); then \
	  failcom='fail=yes'; \
	else \
	  failcom='exit 1'; \
	fi; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	case "$@" in \
	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
	  *) list='$(SUBDIRS)' ;; \
	esac; \
	for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

ID: $(am__tagged_files)
	$(am__define_uniq_tagged_files); mkid -fID $$unique
tags: tags-recursive
TAGS: tags

tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
	set x; \
	here=`pwd`; \
	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
	  include_option=--etags-include; \
	  empty_fix=.; \
	else \
	  include_option=--include; \
	  empty_fix=; \
	fi; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test ! -f $$subdir/TAGS || \
	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
	  fi; \
	done; \
	$(am__define_uniq_tagged_files); \
	shift; \
	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  if test $$# -gt 0; then \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      "$$@" $$unique; \
	  else \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      $$unique; \
	  fi; \
	fi
ctags: ctags-recursive

CTAGS: ctags
ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
	$(am__define_uniq_tagged_files); \
	test -z "$(CTAGS_ARGS)$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && $(am__cd) $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) "$$here"
cscopelist: cscopelist-recursive

cscopelist-am: $(am__tagged_files)
	list='$(am__tagged_files)'; \
	case "$(srcdir)" in \
	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
	  *) sdir=$(subdir)/$(srcdir) ;; \
	esac; \
	for i in $$list; do \
	  if test -f "$$i"; then \
	    echo "$(subdir)/$$i"; \
	  else \
	    echo "$$sdir/$$i"; \
	  fi; \
	done >> $(top_builddir)/cscope.files

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

distdir: $(DISTFILES)
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d "$(distdir)/$$file"; then \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
	  else \
	    test -f "$(distdir)/$$file" \
	    || cp -p $$d/$$file "$(distdir)/$$file" \
	    || exit 1; \
	  fi; \
	done
	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    $(am__make_dryrun) \
	      || test -d "$(distdir)/$$subdir" \
	      || $(MKDIR_P) "$(distdir)/$$subdir" \
	      || exit 1; \
	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
	    $(am__relativize); \
	    new_distdir=$$reldir; \
	    dir1=$$subdir; dir2="$(top_distdir)"; \
	    $(am__relativize); \
	    new_top_distdir=$$reldir; \
	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
	    ($(am__cd) $$subdir && \
	      $(MAKE) $(AM_MAKEFLAGS) \
	        top_distdir="$$new_top_distdir" \
	        distdir="$$new_distdir" \
		am__remove_distdir=: \
		am__skip_length_check=: \
		am__skip_mode_fix=: \
	        distdir) \
	      || exit 1; \
	  fi; \
	done
check-am: all-am
check: check-recursive
all-am: Makefile $(MANS)
installdirs: installdirs-recursive
installdirs-am:
	for dir in "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(man5dir)" "$(DESTDIR)$(man7dir)"; do \
	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
	done
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
	if test -z '$(STRIP)'; then \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	      install; \
	else \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
	fi
mostlyclean-generic:

clean-generic:

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
@ENABLE_DOCBOOK_FALSE@clean-local:
clean: clean-recursive

clean-am: clean-generic clean-libtool clean-local mostlyclean-am

distclean: distclean-recursive
	-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-tags

dvi: dvi-recursive

dvi-am:

html: html-recursive

html-am:

info: info-recursive

info-am:

install-data-am: install-man

install-dvi: install-dvi-recursive

install-dvi-am:

install-exec-am:

install-html: install-html-recursive

install-html-am:

install-info: install-info-recursive

install-info-am:

install-man: install-man1 install-man5 install-man7

install-pdf: install-pdf-recursive

install-pdf-am:

install-ps: install-ps-recursive

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-recursive
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

pdf: pdf-recursive

pdf-am:

ps: ps-recursive

ps-am:

uninstall-am: uninstall-man

uninstall-man: uninstall-man1 uninstall-man5 uninstall-man7

.MAKE: $(am__recursive_targets) install-am install-strip

.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \
	check-am clean clean-generic clean-libtool clean-local \
	cscopelist-am ctags ctags-am distclean distclean-generic \
	distclean-libtool distclean-tags distdir dvi dvi-am html \
	html-am info info-am install install-am install-data \
	install-data-am install-dvi install-dvi-am install-exec \
	install-exec-am install-html install-html-am install-info \
	install-info-am install-man install-man1 install-man5 \
	install-man7 install-pdf install-pdf-am install-ps \
	install-ps-am install-strip installcheck installcheck-am \
	installdirs installdirs-am maintainer-clean \
	maintainer-clean-generic mostlyclean mostlyclean-generic \
	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
	uninstall-am uninstall-man uninstall-man1 uninstall-man5 \
	uninstall-man7

.PRECIOUS: Makefile


@ENABLE_DOCBOOK_TRUE@%.1 : %.sgml
@ENABLE_DOCBOOK_TRUE@	$(db2xman) $<
@ENABLE_DOCBOOK_TRUE@	test "$(shell basename $@)" != "$@" && mv $(shell basename $@) $@ || true

@ENABLE_DOCBOOK_TRUE@%.5 : %.sgml
@ENABLE_DOCBOOK_TRUE@	$(db2xman) $<
@ENABLE_DOCBOOK_TRUE@	test "$(shell basename $@)" != "$@" && mv $(shell basename $@) $@ || true

@ENABLE_DOCBOOK_TRUE@%.7 : %.sgml
@ENABLE_DOCBOOK_TRUE@	$(db2xman) $<
@ENABLE_DOCBOOK_TRUE@	test "$(shell basename $@)" != "$@" && mv $(shell basename $@) $@ || true

@ENABLE_DOCBOOK_TRUE@lxc-%.sgml : common_options.sgml see_also.sgml

@ENABLE_DOCBOOK_TRUE@clean-local:
@ENABLE_DOCBOOK_TRUE@	$(RM) manpage.* *.7 *.5 *.1 $(man_MANS)

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
