uinput device creation

Creation of uinput devices based on existing libevdev devices. More...

Functions
int	libevdev_uinput_create_from_device (const struct libevdev *dev, int uinput_fd, struct libevdev_uinput **uinput_dev)
	Create a uinput device based on the given libevdev device. More...
void	libevdev_uinput_destroy (struct libevdev_uinput *uinput_dev)
	Destroy a previously created uinput device and free associated memory. More...
int	libevdev_uinput_get_fd (const struct libevdev_uinput *uinput_dev)
	Return the file descriptor used to create this uinput device. More...
const char *	libevdev_uinput_get_syspath (struct libevdev_uinput *uinput_dev)
	Return the syspath representing this uinput device. More...
const char *	libevdev_uinput_get_devnode (struct libevdev_uinput *uinput_dev)
	Return the device node representing this uinput device. More...
int	libevdev_uinput_write_event (const struct libevdev_uinput *uinput_dev, unsigned int type, unsigned int code, int value)
	Post an event through the uinput device. More...

Detailed Description

Creation of uinput devices based on existing libevdev devices.

These functions help to create uinput devices that emulate libevdev devices. In the simplest form it serves to duplicate an existing device:

int err;
int fd, new_fd, uifd;
struct libevdev *dev;
struct libevdev_uinput *uidev;
struct input_event ev[2];

fd = open("/dev/input/event0", O_RDONLY);
if (fd < 0)
    return err;

err = libevdev_new_from_fd(fd, &dev);
if (err != 0)
    return err;

uifd = open("/dev/uinput", O_RDWR);
if (uifd < 0)
    return -errno;

err = libevdev_uinput_create_from_device(dev, uifd, &uidev);
if (err != 0)
    return err;

// post a REL_X event
err = libevdev_uinput_write_event(uidev, EV_REL, REL_X, -1);
if (err != 0)
    return err;
libevdev_uinput_write_event(uidev, EV_SYN, SYN_REPORT, 0);
if (err != 0)
    return err;

libevdev_uinput_destroy(uidev);
libevdev_free(dev);
close(uifd);
close(fd);

Alternatively, a device can be constructed from scratch:

int err;
struct libevdev *dev;
struct libevdev_uinput *uidev;

dev = libevdev_new();
libevdev_set_name(dev, "test device");
libevdev_enable_event_type(dev, EV_REL);
libevdev_enable_event_code(dev, EV_REL, REL_X, NULL);
libevdev_enable_event_code(dev, EV_REL, REL_Y, NULL);
libevdev_enable_event_type(dev, EV_KEY);
libevdev_enable_event_code(dev, EV_KEY, BTN_LEFT, NULL);
libevdev_enable_event_code(dev, EV_KEY, BTN_MIDDLE, NULL);
libevdev_enable_event_code(dev, EV_KEY, BTN_RIGHT, NULL);

err = libevdev_uinput_create_from_device(dev,
                                         LIBEVDEV_UINPUT_OPEN_MANAGED,
                                         &uidev);
if (err != 0)
    return err;

// ... do something ...

libevdev_uinput_destroy(uidev);

Function Documentation

int libevdev_uinput_create_from_device	(	const struct libevdev *	dev,
		int	uinput_fd,
		struct libevdev_uinput **	uinput_dev
	)

Create a uinput device based on the given libevdev device.

The uinput device will be an exact copy of the libevdev device, minus the bits that uinput doesn't allow to be set.

If uinput_fd is LIBEVDEV_UINPUT_OPEN_MANAGED, libevdev_uinput_create_from_device() will open /dev/uinput in read/write mode and manage the file descriptor. Otherwise, uinput_fd must be opened by the caller and opened with the appropriate permissions.

The device's lifetime is tied to the uinput file descriptor, closing it will destroy the uinput device. You should call libevdev_uinput_destroy() before closing the file descriptor to free allocated resources. A file descriptor can only create one uinput device at a time; the second device will fail with -EINVAL.

You don't need to keep the file descriptor variable around, libevdev_uinput_get_fd() will return it when needed.

Note

Due to limitations in the uinput kernel module, REP_DELAY and REP_PERIOD will default to the kernel defaults, not to the ones set in the source device.

Parameters

	dev	The device to duplicate
	uinput_fd	LIBEVDEV_UINPUT_OPEN_MANAGED or a file descriptor to /dev/uinput,
[out]	uinput_dev	The newly created libevdev device.

Returns

0 on success or a negative errno on failure. On failure, the value of uinput_dev is unmodified.

See also

libevdev_uinput_destroy

void libevdev_uinput_destroy

(

struct libevdev_uinput *

uinput_dev

)

Destroy a previously created uinput device and free associated memory.

If the device was opened with LIBEVDEV_UINPUT_OPEN_MANAGED, libevdev_uinput_destroy() also closes the file descriptor. Otherwise, the fd is left as-is and must be closed by the caller.

Parameters

uinput_dev

A previously created uinput device.

const char* libevdev_uinput_get_devnode

(

struct libevdev_uinput *

uinput_dev

)

Return the device node representing this uinput device.

This relies on libevdev_uinput_get_syspath() to provide a valid syspath. See libevdev_uinput_get_syspath() for more details.

Note

This function may return NULL. libevdev may have to guess the syspath and the device node. See libevdev_uinput_get_syspath() for details.

Parameters

uinput_dev

A previously created uinput device.

Returns

The device node for this device, in the form of /dev/input/eventN

See also

libevdev_uinput_get_syspath

int libevdev_uinput_get_fd

(

const struct libevdev_uinput *

uinput_dev

)

Return the file descriptor used to create this uinput device.

This is the fd pointing to /dev/uinput. This file descriptor may be used to write events that are emitted by the uinput device. Closing this file descriptor will destroy the uinput device, you should call libevdev_uinput_destroy() first to free allocated resources.

Parameters

uinput_dev

A previously created uinput device.

Returns

The file descriptor used to create this device

const char* libevdev_uinput_get_syspath

(

struct libevdev_uinput *

uinput_dev

)

Return the syspath representing this uinput device.

If the UI_GET_SYSNAME ioctl not available, libevdev makes an educated guess. The UI_GET_SYSNAME ioctl is available since Linux 3.15.

Note

This function may return NULL if UI_GET_SYSNAME is not available. In that case, libevdev uses ctime and the device name to guess devices. To avoid false positives, wait at least wait at least 1.5s between creating devices that have the same name.

Parameters

uinput_dev

A previously created uinput device.

Returns

The syspath for this device, including the preceding /sys

See also

libevdev_uinput_get_devnode

int libevdev_uinput_write_event	(	const struct libevdev_uinput *	uinput_dev,
		unsigned int	type,
		unsigned int	code,
		int	value
	)

Post an event through the uinput device.

It is the caller's responsibility that any event sequence is terminated with an EV_SYN/SYN_REPORT/0 event. Otherwise, listeners on the device node will not see the events until the next EV_SYN event is posted.

Parameters

uinput_dev	A previously created uinput device.
type	Event type (EV_ABS, EV_REL, etc.)
code	Event code (ABS_X, REL_Y, etc.)
value	The event value

Returns

0 on success or a negative errno on error