# Makefile.in generated by automake 1.15 from Makefile.am.
# @configure_input@

# Copyright (C) 1994-2014 Free Software Foundation, Inc.

# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@

# Makefile.am
#
# Keepalived OpenSource project.

VPATH = @srcdir@
am__is_gnu_make = { \
  if test -z '$(MAKELEVEL)'; then \
    false; \
  elif test -n '$(MAKE_HOST)'; then \
    true; \
  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
    true; \
  else \
    false; \
  fi; \
}
am__make_running_with_option = \
  case $${target_option-} in \
      ?) ;; \
      *) echo "am__make_running_with_option: internal error: invalid" \
              "target option '$${target_option-}' specified" >&2; \
         exit 1;; \
  esac; \
  has_opt=no; \
  sane_makeflags=$$MAKEFLAGS; \
  if $(am__is_gnu_make); then \
    sane_makeflags=$$MFLAGS; \
  else \
    case $$MAKEFLAGS in \
      *\\[\ \	]*) \
        bs=\\; \
        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
    esac; \
  fi; \
  skip_next=no; \
  strip_trailopt () \
  { \
    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
  }; \
  for flg in $$sane_makeflags; do \
    test $$skip_next = yes && { skip_next=no; continue; }; \
    case $$flg in \
      *=*|--*) continue;; \
        -*I) strip_trailopt 'I'; skip_next=yes;; \
      -*I?*) strip_trailopt 'I';; \
        -*O) strip_trailopt 'O'; skip_next=yes;; \
      -*O?*) strip_trailopt 'O';; \
        -*l) strip_trailopt 'l'; skip_next=yes;; \
      -*l?*) strip_trailopt 'l';; \
      -[dEDm]) skip_next=yes;; \
      -[JT]) skip_next=yes;; \
    esac; \
    case $$flg in \
      *$$target_option*) has_opt=yes; break;; \
    esac; \
  done; \
  test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
@SNMP_TRUE@am__append_1 = KEEPALIVED-MIB.txt
@SNMP_RFCV2_TRUE@am__append_2 = VRRP-MIB.txt
@SNMP_RFCV3_TRUE@am__append_3 = VRRPv3-MIB.txt
subdir = doc
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/lib/config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
AM_V_P = $(am__v_P_@AM_V@)
am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_@AM_V@)
am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
am__v_GEN_0 = @echo "  GEN     " $@;
am__v_GEN_1 = 
AM_V_at = $(am__v_at_@AM_V@)
am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
am__v_at_0 = @
am__v_at_1 = 
SOURCES =
DIST_SOURCES =
am__can_run_installinfo = \
  case $$AM_UPDATE_INFO_DIR in \
    n|no|NO) false;; \
    *) (install-info --version) >/dev/null 2>&1;; \
  esac
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
  for p in $$list; do echo "$$p $$p"; done | \
  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
    if (++n[$$2] == $(am__install_max)) \
      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
    END { for (dir in files) print dir, files[dir] }'
am__base_list = \
  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__uninstall_files_from_dir = { \
  test -z "$$files" \
    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
         $(am__cd) "$$dir" && rm -f $$files; }; \
  }
man1dir = $(mandir)/man1
am__installdirs = "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(man5dir)" \
	"$(DESTDIR)$(man8dir)" "$(DESTDIR)$(mibsdir)" \
	"$(DESTDIR)$(sampledir)"
man5dir = $(mandir)/man5
man8dir = $(mandir)/man8
NROFF = nroff
MANS = $(dist_man1_MANS) $(dist_man5_MANS) $(dist_man8_MANS)
DATA = $(mibs_DATA) $(sample_DATA)
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
am__DIST_COMMON = $(dist_man1_MANS) $(dist_man5_MANS) \
	$(dist_man8_MANS) $(srcdir)/Makefile.in
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AR = @AR@
ARFLAGS = @ARFLAGS@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
GENHASH_LIBS = @GENHASH_LIBS@
GREP = @GREP@
HAVE_SPHINX_BUILD = @HAVE_SPHINX_BUILD@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
KA_CFLAGS = @KA_CFLAGS@
KA_CPPFLAGS = @KA_CPPFLAGS@
KA_LDFLAGS = @KA_LDFLAGS@
KA_LIBS = @KA_LIBS@
LDD = @LDD@
LDFLAGS = @LDFLAGS@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
MAINTAINERCLEANFILES = @MAINTAINERCLEANFILES@
MAKEINFO = @MAKEINFO@
MKDIR_P = @MKDIR_P@
NETSNMP_CONFIG = @NETSNMP_CONFIG@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PID_DIR = @PID_DIR@
PKG_CONFIG = @PKG_CONFIG@
PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
RANLIB = @RANLIB@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
SPHINXBUILDNAME = @SPHINXBUILDNAME@
STRIP = @STRIP@
VERSION = @VERSION@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build_alias = @build_alias@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host_alias = @host_alias@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
runstatedir = @runstatedir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
systemdsystemunitdir = @systemdsystemunitdir@
target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
@BUILD_GENHASH_TRUE@dist_man1_MANS = man/man1/genhash.1
dist_man5_MANS = man/man5/keepalived.conf.5
dist_man8_MANS = man/man8/keepalived.8
EXTRA_DIST = source samples keepalived.conf.SYNOPSIS NOTE_vrrp_vmac.txt KEEPALIVED-MIB.txt VRRP-MIB.txt VRRPv3-MIB.txt
sampledir = $(sysconfdir)/@PACKAGE@/samples
sample_DATA = $(srcdir)/samples/*
mibsdir = $(datarootdir)/snmp/mibs
mibs_DATA = $(am__append_1) $(am__append_2) $(am__append_3)

# You can set these variables from the command line.
@BUILD_DOCS_TRUE@SPHINXOPTS = 
@BUILD_DOCS_TRUE@SPHINXBUILD = @SPHINXBUILDNAME@
@BUILD_DOCS_TRUE@PAPER = a4
@BUILD_DOCS_TRUE@BUILDDIR = build

# Internal variables.
@BUILD_DOCS_TRUE@PAPEROPT = -D latex_paper_size=$(PAPER)
@BUILD_DOCS_TRUE@ALLSPHINXOPTS = -d $(BUILDDIR)/doctrees $(PAPEROPT) $(SPHINXOPTS) source
# the i18n builder cannot share the environment and doctrees with the others
@BUILD_DOCS_TRUE@I18NSPHINXOPTS = $(PAPEROPT) $(SPHINXOPTS) source
all: all-am

.SUFFIXES:
$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
	        && { if test -f $@; then exit 0; else break; fi; }; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --foreign doc/Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure:  $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):
install-man1: $(dist_man1_MANS)
	@$(NORMAL_INSTALL)
	@list1='$(dist_man1_MANS)'; \
	list2=''; \
	test -n "$(man1dir)" \
	  && test -n "`echo $$list1$$list2`" \
	  || exit 0; \
	echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
	$(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
	{ for i in $$list1; do echo "$$i"; done;  \
	if test -n "$$list2"; then \
	  for i in $$list2; do echo "$$i"; done \
	    | sed -n '/\.1[a-z]*$$/p'; \
	fi; \
	} | while read p; do \
	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; echo "$$p"; \
	done | \
	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
	sed 'N;N;s,\n, ,g' | { \
	list=; while read file base inst; do \
	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
	  fi; \
	done; \
	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
	while read files; do \
	  test -z "$$files" || { \
	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
	done; }

uninstall-man1:
	@$(NORMAL_UNINSTALL)
	@list='$(dist_man1_MANS)'; test -n "$(man1dir)" || exit 0; \
	files=`{ for i in $$list; do echo "$$i"; done; \
	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
	dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
install-man5: $(dist_man5_MANS)
	@$(NORMAL_INSTALL)
	@list1='$(dist_man5_MANS)'; \
	list2=''; \
	test -n "$(man5dir)" \
	  && test -n "`echo $$list1$$list2`" \
	  || exit 0; \
	echo " $(MKDIR_P) '$(DESTDIR)$(man5dir)'"; \
	$(MKDIR_P) "$(DESTDIR)$(man5dir)" || exit 1; \
	{ for i in $$list1; do echo "$$i"; done;  \
	if test -n "$$list2"; then \
	  for i in $$list2; do echo "$$i"; done \
	    | sed -n '/\.5[a-z]*$$/p'; \
	fi; \
	} | while read p; do \
	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; echo "$$p"; \
	done | \
	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^5][0-9a-z]*$$,5,;x' \
	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
	sed 'N;N;s,\n, ,g' | { \
	list=; while read file base inst; do \
	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man5dir)/$$inst'"; \
	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man5dir)/$$inst" || exit $$?; \
	  fi; \
	done; \
	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
	while read files; do \
	  test -z "$$files" || { \
	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man5dir)'"; \
	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man5dir)" || exit $$?; }; \
	done; }

uninstall-man5:
	@$(NORMAL_UNINSTALL)
	@list='$(dist_man5_MANS)'; test -n "$(man5dir)" || exit 0; \
	files=`{ for i in $$list; do echo "$$i"; done; \
	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^5][0-9a-z]*$$,5,;x' \
	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
	dir='$(DESTDIR)$(man5dir)'; $(am__uninstall_files_from_dir)
install-man8: $(dist_man8_MANS)
	@$(NORMAL_INSTALL)
	@list1='$(dist_man8_MANS)'; \
	list2=''; \
	test -n "$(man8dir)" \
	  && test -n "`echo $$list1$$list2`" \
	  || exit 0; \
	echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
	$(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
	{ for i in $$list1; do echo "$$i"; done;  \
	if test -n "$$list2"; then \
	  for i in $$list2; do echo "$$i"; done \
	    | sed -n '/\.8[a-z]*$$/p'; \
	fi; \
	} | while read p; do \
	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; echo "$$p"; \
	done | \
	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
	sed 'N;N;s,\n, ,g' | { \
	list=; while read file base inst; do \
	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
	  fi; \
	done; \
	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
	while read files; do \
	  test -z "$$files" || { \
	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
	done; }

uninstall-man8:
	@$(NORMAL_UNINSTALL)
	@list='$(dist_man8_MANS)'; test -n "$(man8dir)" || exit 0; \
	files=`{ for i in $$list; do echo "$$i"; done; \
	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
	dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
install-mibsDATA: $(mibs_DATA)
	@$(NORMAL_INSTALL)
	@list='$(mibs_DATA)'; test -n "$(mibsdir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(mibsdir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(mibsdir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(mibsdir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(mibsdir)" || exit $$?; \
	done

uninstall-mibsDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(mibs_DATA)'; test -n "$(mibsdir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	dir='$(DESTDIR)$(mibsdir)'; $(am__uninstall_files_from_dir)
install-sampleDATA: $(sample_DATA)
	@$(NORMAL_INSTALL)
	@list='$(sample_DATA)'; test -n "$(sampledir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(sampledir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(sampledir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(sampledir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(sampledir)" || exit $$?; \
	done

uninstall-sampleDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(sample_DATA)'; test -n "$(sampledir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	dir='$(DESTDIR)$(sampledir)'; $(am__uninstall_files_from_dir)
tags TAGS:

ctags CTAGS:

cscope cscopelist:


distdir: $(DISTFILES)
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d "$(distdir)/$$file"; then \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
	  else \
	    test -f "$(distdir)/$$file" \
	    || cp -p $$d/$$file "$(distdir)/$$file" \
	    || exit 1; \
	  fi; \
	done
	$(MAKE) $(AM_MAKEFLAGS) \
	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
	  dist-hook
check-am: all-am
check: check-am
all-am: Makefile $(MANS) $(DATA)
installdirs:
	for dir in "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(man5dir)" "$(DESTDIR)$(man8dir)" "$(DESTDIR)$(mibsdir)" "$(DESTDIR)$(sampledir)"; do \
	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
	done
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	if test -z '$(STRIP)'; then \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	      install; \
	else \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
	fi
mostlyclean-generic:

clean-generic:

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
@BUILD_DOCS_FALSE@clean: clean-am

clean-am: clean-generic mostlyclean-am

distclean: distclean-am
	-rm -f Makefile
distclean-am: clean-am distclean-generic

dvi: dvi-am

dvi-am:

@BUILD_DOCS_FALSE@html: html-am

html-am:

@BUILD_DOCS_FALSE@info: info-am

info-am:

install-data-am: install-man install-mibsDATA install-sampleDATA

install-dvi: install-dvi-am

install-dvi-am:

install-exec-am:

install-html: install-html-am

install-html-am:

install-info: install-info-am

install-info-am:

install-man: install-man1 install-man5 install-man8

install-pdf: install-pdf-am

install-pdf-am:

install-ps: install-ps-am

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-am
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-generic

pdf: pdf-am

pdf-am:

ps: ps-am

ps-am:

uninstall-am: uninstall-man uninstall-mibsDATA uninstall-sampleDATA

uninstall-man: uninstall-man1 uninstall-man5 uninstall-man8

.MAKE: install-am install-strip

.PHONY: all all-am check check-am clean clean-generic cscopelist-am \
	ctags-am dist-hook distclean distclean-generic distdir dvi \
	dvi-am html html-am info info-am install install-am \
	install-data install-data-am install-dvi install-dvi-am \
	install-exec install-exec-am install-html install-html-am \
	install-info install-info-am install-man install-man1 \
	install-man5 install-man8 install-mibsDATA install-pdf \
	install-pdf-am install-ps install-ps-am install-sampleDATA \
	install-strip installcheck installcheck-am installdirs \
	maintainer-clean maintainer-clean-generic mostlyclean \
	mostlyclean-generic pdf pdf-am ps ps-am tags-am uninstall \
	uninstall-am uninstall-man uninstall-man1 uninstall-man5 \
	uninstall-man8 uninstall-mibsDATA uninstall-sampleDATA

.PRECIOUS: Makefile


dist-hook:
	rm -rf `find $(distdir)/doc -type d -name ".git*"`

@BUILD_DOCS_FALSE@.PHONY: all help

@BUILD_DOCS_FALSE@all:
@BUILD_DOCS_FALSE@	@true

@BUILD_DOCS_FALSE@help:
@BUILD_DOCS_FALSE@	@echo "To build the documentation, make sure you have Sphinx installed, then"
@BUILD_DOCS_FALSE@	@echo "run configure with the SPHINXBUILD environment variable pointing to"
@BUILD_DOCS_FALSE@	@echo "the path of the 'sphinx-build' executable. Alternatively you can add"
@BUILD_DOCS_FALSE@	@echo "the directory with the executable to your PATH. If you don't have"
@BUILD_DOCS_FALSE@	@echo "Sphinx installed, either try installing package python-sphinx or"
@BUILD_DOCS_FALSE@	@echo "equivalent, or grab it from http://sphinx-doc.org/."

@BUILD_DOCS_TRUE@.PHONY: help clean html dirhtml singlehtml pickle json htmlhelp qthelp devhelp epub latex latexpdf text man changes linkcheck doctest gettext

@BUILD_DOCS_TRUE@default: man

@BUILD_DOCS_TRUE@help:
@BUILD_DOCS_TRUE@	@echo "Please use \`make <target>' where <target> is one of"
@BUILD_DOCS_TRUE@	@echo "  html       to make standalone HTML files"
@BUILD_DOCS_TRUE@	@echo "  singlehtml to make a single large HTML file"
@BUILD_DOCS_TRUE@	@echo "  pickle     to make pickle files"
@BUILD_DOCS_TRUE@	@echo "  json       to make JSON files"
@BUILD_DOCS_TRUE@	@echo "  htmlhelp   to make HTML files and a HTML help project"
@BUILD_DOCS_TRUE@	@echo "  qthelp     to make HTML files and a qthelp project"
@BUILD_DOCS_TRUE@	@echo "  devhelp    to make HTML files and a Devhelp project"
@BUILD_DOCS_TRUE@	@echo "  epub       to make an epub"
@BUILD_DOCS_TRUE@	@echo "  latex      to make LaTeX files, you can set PAPER=a4 or PAPER=letter"
@BUILD_DOCS_TRUE@	@echo "  latexpdf   to make LaTeX files and run them through pdflatex"
@BUILD_DOCS_TRUE@	@echo "  latexpdfja to make LaTeX files and run them through platex/dvipdfmx"
@BUILD_DOCS_TRUE@	@echo "  text       to make text files"
@BUILD_DOCS_TRUE@	@echo "  man        to make manual pages"
@BUILD_DOCS_TRUE@	@echo "  texinfo    to make Texinfo files"
@BUILD_DOCS_TRUE@	@echo "  info       to make Texinfo files and run them through makeinfo"
@BUILD_DOCS_TRUE@	@echo "  gettext    to make PO message catalogs"
@BUILD_DOCS_TRUE@	@echo "  changes    to make an overview of all changed/added/deprecated items"
@BUILD_DOCS_TRUE@	@echo "  xml        to make Docutils-native XML files"
@BUILD_DOCS_TRUE@	@echo "  pseudoxml  to make pseudoxml-XML files for display purposes"
@BUILD_DOCS_TRUE@	@echo "  linkcheck  to check all external links for integrity"
@BUILD_DOCS_TRUE@	@echo "  doctest    to run all doctests embedded in the documentation (if enabled)"

@BUILD_DOCS_TRUE@clean:
@BUILD_DOCS_TRUE@	rm -rf $(BUILDDIR)

@BUILD_DOCS_TRUE@html:
@BUILD_DOCS_TRUE@	$(SPHINXBUILD) -b html $(ALLSPHINXOPTS) $(BUILDDIR)/html
@BUILD_DOCS_TRUE@	@echo
@BUILD_DOCS_TRUE@	@echo "Build finished. The HTML pages are in $(BUILDDIR)/html."

@BUILD_DOCS_TRUE@dirhtml:
@BUILD_DOCS_TRUE@	$(SPHINXBUILD) -b dirhtml $(ALLSPHINXOPTS) $(BUILDDIR)/dirhtml
@BUILD_DOCS_TRUE@	@echo
@BUILD_DOCS_TRUE@	@echo "Build finished. The HTML pages are in $(BUILDDIR)/dirhtml."

@BUILD_DOCS_TRUE@singlehtml:
@BUILD_DOCS_TRUE@	$(SPHINXBUILD) -b singlehtml $(ALLSPHINXOPTS) $(BUILDDIR)/singlehtml
@BUILD_DOCS_TRUE@	@echo
@BUILD_DOCS_TRUE@	@echo "Build finished. The HTML page is in $(BUILDDIR)/singlehtml."

@BUILD_DOCS_TRUE@pickle:
@BUILD_DOCS_TRUE@	$(SPHINXBUILD) -b pickle $(ALLSPHINXOPTS) $(BUILDDIR)/pickle
@BUILD_DOCS_TRUE@	@echo
@BUILD_DOCS_TRUE@	@echo "Build finished; now you can process the pickle files."

@BUILD_DOCS_TRUE@json:
@BUILD_DOCS_TRUE@	$(SPHINXBUILD) -b json $(ALLSPHINXOPTS) $(BUILDDIR)/json
@BUILD_DOCS_TRUE@	@echo
@BUILD_DOCS_TRUE@	@echo "Build finished; now you can process the JSON files."

@BUILD_DOCS_TRUE@htmlhelp:
@BUILD_DOCS_TRUE@	$(SPHINXBUILD) -b htmlhelp $(ALLSPHINXOPTS) $(BUILDDIR)/htmlhelp
@BUILD_DOCS_TRUE@	@echo
@BUILD_DOCS_TRUE@	@echo "Build finished; now you can run HTML Help Workshop with the" \
@BUILD_DOCS_TRUE@	      ".hhp project file in $(BUILDDIR)/htmlhelp."

@BUILD_DOCS_TRUE@qthelp:
@BUILD_DOCS_TRUE@	$(SPHINXBUILD) -b qthelp $(ALLSPHINXOPTS) $(BUILDDIR)/qthelp
@BUILD_DOCS_TRUE@	@echo
@BUILD_DOCS_TRUE@	@echo "Build finished; now you can run "qcollectiongenerator" with the" \
@BUILD_DOCS_TRUE@	      ".qhcp project file in $(BUILDDIR)/qthelp, like this:"
@BUILD_DOCS_TRUE@	@echo "# qcollectiongenerator $(BUILDDIR)/qthelp/Keepalived.qhcp"
@BUILD_DOCS_TRUE@	@echo "To view the help file:"
@BUILD_DOCS_TRUE@	@echo "# assistant -collectionFile $(BUILDDIR)/qthelp/Keepalived.qhc"

@BUILD_DOCS_TRUE@devhelp:
@BUILD_DOCS_TRUE@	$(SPHINXBUILD) -b devhelp $(ALLSPHINXOPTS) $(BUILDDIR)/devhelp
@BUILD_DOCS_TRUE@	@echo
@BUILD_DOCS_TRUE@	@echo "Build finished."
@BUILD_DOCS_TRUE@	@echo "To view the help file:"
@BUILD_DOCS_TRUE@	@echo "# mkdir -p $$HOME/.local/share/devhelp/Keepalived"
@BUILD_DOCS_TRUE@	@echo "# ln -s $(BUILDDIR)/devhelp $$HOME/.local/share/devhelp/Keepalived"
@BUILD_DOCS_TRUE@	@echo "# devhelp"

@BUILD_DOCS_TRUE@epub:
@BUILD_DOCS_TRUE@	$(SPHINXBUILD) -b epub $(ALLSPHINXOPTS) $(BUILDDIR)/epub
@BUILD_DOCS_TRUE@	@echo
@BUILD_DOCS_TRUE@	@echo "Build finished. The epub file is in $(BUILDDIR)/epub."

@BUILD_DOCS_TRUE@latex:
@BUILD_DOCS_TRUE@	$(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
@BUILD_DOCS_TRUE@	@echo
@BUILD_DOCS_TRUE@	@echo "Build finished; the LaTeX files are in $(BUILDDIR)/latex."
@BUILD_DOCS_TRUE@	@echo "Run \`make' in that directory to run these through (pdf)latex" \
@BUILD_DOCS_TRUE@	      "(use \`make latexpdf' here to do that automatically)."

@BUILD_DOCS_TRUE@latexpdf:
@BUILD_DOCS_TRUE@	$(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
@BUILD_DOCS_TRUE@	@echo "Running LaTeX files through pdflatex..."
@BUILD_DOCS_TRUE@	$(MAKE) -C $(BUILDDIR)/latex all-pdf
@BUILD_DOCS_TRUE@	@echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex."

@BUILD_DOCS_TRUE@latexpdfja:
@BUILD_DOCS_TRUE@	$(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
@BUILD_DOCS_TRUE@	@echo "Running LaTeX files through platex and dvipdfmx..."
@BUILD_DOCS_TRUE@	$(MAKE) -C $(BUILDDIR)/latex all-pdf-ja
@BUILD_DOCS_TRUE@	@echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex."

@BUILD_DOCS_TRUE@text:
@BUILD_DOCS_TRUE@	$(SPHINXBUILD) -b text $(ALLSPHINXOPTS) $(BUILDDIR)/text
@BUILD_DOCS_TRUE@	@echo
@BUILD_DOCS_TRUE@	@echo "Build finished. The text files are in $(BUILDDIR)/text."

@BUILD_DOCS_TRUE@man:
@BUILD_DOCS_TRUE@	$(SPHINXBUILD) -b man $(ALLSPHINXOPTS) $(BUILDDIR)/man
@BUILD_DOCS_TRUE@	@echo
@BUILD_DOCS_TRUE@	@echo "Build finished. The manual pages are in $(BUILDDIR)/man."

@BUILD_DOCS_TRUE@texinfo:
@BUILD_DOCS_TRUE@	$(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo
@BUILD_DOCS_TRUE@	@echo
@BUILD_DOCS_TRUE@	@echo "Build finished. The Texinfo files are in $(BUILDDIR)/texinfo."
@BUILD_DOCS_TRUE@	@echo "Run \`make' in that directory to run these through makeinfo" \
@BUILD_DOCS_TRUE@	      "(use \`make info' here to do that automatically)."

@BUILD_DOCS_TRUE@info:
@BUILD_DOCS_TRUE@	$(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo
@BUILD_DOCS_TRUE@	@echo "Running Texinfo files through makeinfo..."
@BUILD_DOCS_TRUE@	make -C $(BUILDDIR)/texinfo info
@BUILD_DOCS_TRUE@	@echo "makeinfo finished; the Info files are in $(BUILDDIR)/texinfo."

@BUILD_DOCS_TRUE@gettext:
@BUILD_DOCS_TRUE@	$(SPHINXBUILD) -b gettext $(I18NSPHINXOPTS) $(BUILDDIR)/locale
@BUILD_DOCS_TRUE@	@echo
@BUILD_DOCS_TRUE@	@echo "Build finished. The message catalogs are in $(BUILDDIR)/locale."

@BUILD_DOCS_TRUE@changes:
@BUILD_DOCS_TRUE@	$(SPHINXBUILD) -b changes $(ALLSPHINXOPTS) $(BUILDDIR)/changes
@BUILD_DOCS_TRUE@	@echo
@BUILD_DOCS_TRUE@	@echo "The overview file is in $(BUILDDIR)/changes."

@BUILD_DOCS_TRUE@linkcheck:
@BUILD_DOCS_TRUE@	$(SPHINXBUILD) -b linkcheck $(ALLSPHINXOPTS) $(BUILDDIR)/linkcheck
@BUILD_DOCS_TRUE@	@echo
@BUILD_DOCS_TRUE@	@echo "Link check complete; look for any errors in the above output " \
@BUILD_DOCS_TRUE@	      "or in $(BUILDDIR)/linkcheck/output.txt."

@BUILD_DOCS_TRUE@doctest:
@BUILD_DOCS_TRUE@	$(SPHINXBUILD) -b doctest $(ALLSPHINXOPTS) $(BUILDDIR)/doctest
@BUILD_DOCS_TRUE@	@echo "Testing of doctests in the sources finished, look at the " \
@BUILD_DOCS_TRUE@	      "results in $(BUILDDIR)/doctest/output.txt."

@BUILD_DOCS_TRUE@xml:
@BUILD_DOCS_TRUE@	$(SPHINXBUILD) -b xml $(ALLSPHINXOPTS) $(BUILDDIR)/xml
@BUILD_DOCS_TRUE@	@echo
@BUILD_DOCS_TRUE@	@echo "Build finished. The XML files are in $(BUILDDIR)/xml."

@BUILD_DOCS_TRUE@pseudoxml:
@BUILD_DOCS_TRUE@	$(SPHINXBUILD) -b pseudoxml $(ALLSPHINXOPTS) $(BUILDDIR)/pseudoxml
@BUILD_DOCS_TRUE@	@echo
@BUILD_DOCS_TRUE@	@echo "Build finished. The pseudo-XML files are in $(BUILDDIR)/pseudoxml."

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
