Config File
The ices 2 configuration file is in XML format, which is described in detail below.
There are some sample XML files provided in the distribution under the conf directory
which show the main way ices is used.
live audio streaming, takes audio from the soundcard which can be captured from say the
Mic, line-In, CD or a combination of these.
- ices-oss.xml
- ices-alsa.xml
- ices-roar.xml
Playlist audio streaming, takes pre-encoded Ogg Vorbis files and either sends them
as-is or re-encodes them to different settings
General layout
<?xml version="1.0"?>
<ices>
general settings
stream section
</ices>
General settings
These apply to IceS as a whole. The example below gives a useful example to work to
<background>0</background>
<logpath>/var/log/ices</logpath>
<logfile>ices.log</logfile>
<logsize>2048</logsize>
<loglevel>3</loglevel>
<consolelog>0</consolelog>
<pidfile>/var/log/ices/ices.pid</pidfile>
background
Set to 1 if you want IceS to put itself into the background.
logpath
A directory that can be written to by the user that IceS runs as. This
can be anywhere you want but as log files are created, write access to the
stated must be given.
logfile
The name of the logfile created. On log re-opening the existing logfile is
renamed to <logfile>.1
logsize
When the log file reaches this size (in kilobytes) then the log file will
be cycled (the default is 2Meg)
loglevel
A number that represents the amount of logging performed.
- 1 - Only error messages are logged
- 2 - The above and warning messages are logged
- 3 - The above and information messages are logged
- 4 - The above and debug messages are logged
consolelog
A value of 1 will cause the log messages to appear on the console instead
of the log files. Setting this to 1 is generally discouraged as logs are
cycled and writing to screen can cause stalls in the application, which
is a problem for timing critical applications.
pidfile
State a filename with path to be created at start time. This file will
then contain a single number which represents the process id of the
running IceS. This process id can then be used to signal the application
of certain events.
Stream section
This describes how the input and outgoing streams are configured.
<stream>
Metadata
Input
Instance
</stream>
Metadata
<metadata>
<name>My Stream</name>
<genre>Rock</genre>
<description>A short description of your stream</description>
<url>http://mysite.org</url>
</metadata>
This section describes what metadata information is passed in the headers
at connection time to icecast. This applies to each instance defined within
the stream section but maybe overridden by a per-instance <metadata>
section.
Input
This section deals with getting the audio data into IceS. There are a few
ways that can happen. Typically it's either from a playlist or via a soundcard.
The layout is consistent between the different input modules. Within the
input section a module tag is needed to identify the module in question. The
rest are made up of param tags specific to the module. There can be several
param tags supplied to a module. Details of the module parameters are
shown later.
Instance
Multiple instances can be defined to allow for multiple encodings, this
is useful for encoding the same input to multiple bitrates. Each instance
defines a particular set actions that occur on the passed in audio. Any
modifications to the input data is isolated to the instance.
<instance>
hostname
port
password
mount
yp
resample
downmix
savefile
encode
</instance>
hostname
State the hostname of the icecast to contact, this can be a name or IP
address and can be IPv4 or IPv6 on systems that support IPv6. The default
is localhost.
port
State the port to connect to, this will be the port icecast is listening on,
typically 8000 but can be any.
password
For providing a stream, a username/password has to be provided, and must
match what icecast expects.
mount
Mountpoints are used to identify a particular stream on a icecast server,
they must begin with / and for the sake of certain listening clients should
end with the .ogg extension.
yp
By default streams will not be advertised on a YP server unless this is set,
and only then if the icecast if configured to talk to YP servers.
reconnectdelay
If the connection to the server is lost ices2 will wait a given time before reconnecting.
This setting controls how long ices2 will wait before reconnecting.
The value is the time in seconds.
reconnectattempts
This setting controls the number of reconnet attempts ices2 will do before considering
the server to be down and stopping the instance.
retry-initial
This setting controls if being unabled to connect to the server at startup is considered a fatal error.
The default is to consider this a fatal error and quit making debugging more easy.
Resample
<resample>
<in-rate>44100</in-rate>
<out-rate>22050</out-rate>
</resample>
When encoding or re-encoding, there is a point where you take PCM audio
and encode to Ogg Vorbis. In some situations a particular encoded stream may
require a lower samplerate to achieve a lower bitrate. The resample will
modify the audio data before it enters the encoder, but does not affect
other instances.
The most common values used are 48000, 44100, 22050 and 11025, and is
really only used to resample to a lower samplerate, going to a higher rate
serves no purpose within IceS.
Downmix
<downmix>1</downmix>
Some streams want to reduce the bitrate further, reducing the number of channels
used to just 1. Converting stereo to mono is fairly common and when this is set
to 1 the number of channels encoded is just 1. Like resample, this only affects
the one instance it's enabled in.
Savefile
<savefile>/home/ices/dump/stream1.ogg</savefile>
Sometimes the stream transmitted wants to be saved to disk. This can be useful
for live recordings.
encode
<encode>
<quality>0</quality>
<nominal-bitrate>65536</nominal-bitrate>
<maximum-bitrate>131072</maximum-bitrate>
<minimum-bitrate>-1</minimum-bitrate>
<managed>0</managed>
<samplerate>22050</samplerate>
<channels>1</channels>
<flush-samples>11000</flush-samples>
</encode>
Remove this section if you don't want your files reencoded when
using playback or RoarAudio input module.
quality
State a quality measure for the encoder. The range goes from -1 to 10 where -1
is the lowest bitrate selection (default 3), and decimals can also be stated, so
for example 1.5 is valid. The actual bitrate used will depend on the tuning in
the vorbis libs, the samplerate, channels and the audio to encode. A quality of 0
at 44100hz and 2 channels is typically around the 64kbps mark.
nominal-bitrate
State a bitrate that the encoder should try to keep to. This can be used as an
alternative to selecting quality.
managed
State 1 to enable full bitrate management in the encoder. This is used with
nominal-bitrate, maximum-bitrate and minimum-bitrate to produce a stream with
more strict bitrate requirements. Enabling this currently leads to higher CPU
usage.
maximum-bitrate
State bitrate in bits per second to limit max bandwidth used on a stream. Only
applies if managed is enabled.
minimum-bitrate
State bitrate in bits per second to limit minimum bandwidth used on a stream.
Only applies if managed is enabled, this option has very little use so
should not really be needed.
samplerate
State the samplerate used for the encoding, this should be either the same as
the input or the result of the resample. Getting the samplerate wrong will
cause the audio to be represented wrong and therefore sound like it's running
too fast or too slow.
channels
State the number of channels to use in the encoding. This will either be the
number of channels from the input or 1 if downmix is enabled.
flush-samples
This is the trigger level at which Ogg pages are created for sending to the server.
Depending on the bitrate and compression achieved a single Ogg page can contain many
seconds of audio which may not be wanted as that can trigger timeouts.
Setting this to the same value as the encode samplerate will mean that a page per
second is sent, if a value that is half of the encoded samplerate is specified then
2 Ogg pages per second are sent.