# Makefile.in generated by automake 1.15.1 from Makefile.am.
# @configure_input@

# Copyright (C) 1994-2017 Free Software Foundation, Inc.

# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@

#
# Makefile.am for nth module
#
# Copyright (C) 2005,2006 Nokia Corporation
# Contact: Pekka Pessi <pekka.pessi@nokia.com>
# Licensed under LGPL. See file COPYING.

# ----------------------------------------------------------------------
# Header paths

# common Makefile targets for libsofia-sip-ua(-glib) modules
# ----------------------------------------------------------

#
# run tests with valgrind
#

# Copyright (C) 2007 Nokia Corporation.

# This library is free software; you can redistribute it and/or
# modify it under the terms of the GNU Lesser General Public License
# as published by the Free Software Foundation; either version 2.1 of
# the License, or (at your option) any later version.

# This file contains free software from Makefile.in by the Free Software
# Foundation:

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005  Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

#
# Generate lcov output
#

#
# Copyright (C) 2007 Nokia Corporation
# Contact: Pekka Pessi <pekka.pessi@nokia.com>
# Licensed under LGPL. See file COPYING.
#

# Silent compilation w/ Automake 1.9 or 1.10
# ----------------------------------------------------------

# Automake 1.9.6 is not clever enough to override suffix rules within if
# if SOFIA_COMPILE_SILENT


VPATH = @srcdir@
am__is_gnu_make = { \
  if test -z '$(MAKELEVEL)'; then \
    false; \
  elif test -n '$(MAKE_HOST)'; then \
    true; \
  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
    true; \
  else \
    false; \
  fi; \
}
am__make_running_with_option = \
  case $${target_option-} in \
      ?) ;; \
      *) echo "am__make_running_with_option: internal error: invalid" \
              "target option '$${target_option-}' specified" >&2; \
         exit 1;; \
  esac; \
  has_opt=no; \
  sane_makeflags=$$MAKEFLAGS; \
  if $(am__is_gnu_make); then \
    sane_makeflags=$$MFLAGS; \
  else \
    case $$MAKEFLAGS in \
      *\\[\ \	]*) \
        bs=\\; \
        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
    esac; \
  fi; \
  skip_next=no; \
  strip_trailopt () \
  { \
    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
  }; \
  for flg in $$sane_makeflags; do \
    test $$skip_next = yes && { skip_next=no; continue; }; \
    case $$flg in \
      *=*|--*) continue;; \
        -*I) strip_trailopt 'I'; skip_next=yes;; \
      -*I?*) strip_trailopt 'I';; \
        -*O) strip_trailopt 'O'; skip_next=yes;; \
      -*O?*) strip_trailopt 'O';; \
        -*l) strip_trailopt 'l'; skip_next=yes;; \
      -*l?*) strip_trailopt 'l';; \
      -[dEDm]) skip_next=yes;; \
      -[JT]) skip_next=yes;; \
    esac; \
    case $$flg in \
      *$$target_option*) has_opt=yes; break;; \
    esac; \
  done; \
  test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
target_triplet = @target@
check_PROGRAMS = test_nth$(EXEEXT) http-client$(EXEEXT) \
	http-server$(EXEEXT)
TESTS = test_nth$(EXEEXT)

# Use with --enable-ndebug
@NDEBUG_TRUE@am__append_1 = -DNDEBUG
@HAVE_GENPNG_TRUE@@HAVE_LCOV_TRUE@am__append_2 = --frames
@HAVE_LCOV_TRUE@am__append_3 = lcov lcov-report lcov-rerun clean-lcov covcheck uncovered
subdir = libsofia-sip-ua/nth
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
	$(top_srcdir)/acinclude.m4 $(top_srcdir)/m4/sac-pkg-config.m4 \
	$(top_srcdir)/m4/sac-general.m4 \
	$(top_srcdir)/m4/sac-openssl.m4 $(top_srcdir)/m4/sac-su2.m4 \
	$(top_srcdir)/m4/sac-su.m4 $(top_srcdir)/m4/sac-tport.m4 \
	$(top_srcdir)/m4/sac-coverage.m4 \
	$(top_srcdir)/../apr/build/apr_common.m4 \
	$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am $(nobase_include_sofia_HEADERS) \
	$(am__DIST_COMMON)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/config.h \
	$(top_builddir)/libsofia-sip-ua/su/sofia-sip/su_configure.h
CONFIG_CLEAN_FILES = Doxyfile
CONFIG_CLEAN_VPATH_FILES =
LTLIBRARIES = $(noinst_LTLIBRARIES)
libnth_la_LIBADD =
am_libnth_la_OBJECTS = nth_client.lo nth_server.lo nth_tag.lo \
	nth_tag_ref.lo
libnth_la_OBJECTS = $(am_libnth_la_OBJECTS)
AM_V_lt = $(am__v_lt_@AM_V@)
am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
am__v_lt_0 = --silent
am__v_lt_1 = 
http_client_SOURCES = http-client.c
http_client_OBJECTS = http-client.$(OBJEXT)
http_client_LDADD = $(LDADD)
http_client_DEPENDENCIES = libnth.la ../iptsec/libiptsec.la \
	../ipt/libipt.la ../http/libhttp.la ../sresolv/libsresolv.la \
	../tport/libtport.la ../stun/libstun.la \
	../sresolv/libsresolv.la ../url/liburl.la ../msg/libmsg.la \
	../bnf/libbnf.la ../su/libsu.la
http_server_SOURCES = http-server.c
http_server_OBJECTS = http-server.$(OBJEXT)
http_server_LDADD = $(LDADD)
http_server_DEPENDENCIES = libnth.la ../iptsec/libiptsec.la \
	../ipt/libipt.la ../http/libhttp.la ../sresolv/libsresolv.la \
	../tport/libtport.la ../stun/libstun.la \
	../sresolv/libsresolv.la ../url/liburl.la ../msg/libmsg.la \
	../bnf/libbnf.la ../su/libsu.la
test_nth_SOURCES = test_nth.c
test_nth_OBJECTS = test_nth.$(OBJEXT)
test_nth_LDADD = $(LDADD)
test_nth_DEPENDENCIES = libnth.la ../iptsec/libiptsec.la \
	../ipt/libipt.la ../http/libhttp.la ../sresolv/libsresolv.la \
	../tport/libtport.la ../stun/libstun.la \
	../sresolv/libsresolv.la ../url/liburl.la ../msg/libmsg.la \
	../bnf/libbnf.la ../su/libsu.la
test_nth_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
	$(test_nth_LDFLAGS) $(LDFLAGS) -o $@
AM_V_P = $(am__v_P_@AM_V@)
am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_@AM_V@)
am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
am__v_GEN_0 = @echo "  GEN     " $@;
am__v_GEN_1 = 
AM_V_at = $(am__v_at_@AM_V@)
am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
am__v_at_0 = @
am__v_at_1 = 
DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) -I$(top_builddir)/libsofia-sip-ua/su/sofia-sip
depcomp = $(SHELL) $(top_srcdir)/depcomp
am__depfiles_maybe = depfiles
am__mv = mv -f
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
AM_V_CC = $(am__v_CC_@AM_V@)
am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
am__v_CC_0 = @echo "  CC      " $@;
am__v_CC_1 = 
CCLD = $(CC)
AM_V_CCLD = $(am__v_CCLD_@AM_V@)
am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
am__v_CCLD_0 = @echo "  CCLD    " $@;
am__v_CCLD_1 = 
SOURCES = $(libnth_la_SOURCES) http-client.c http-server.c test_nth.c
DIST_SOURCES = $(libnth_la_SOURCES) http-client.c http-server.c \
	test_nth.c
am__can_run_installinfo = \
  case $$AM_UPDATE_INFO_DIR in \
    n|no|NO) false;; \
    *) (install-info --version) >/dev/null 2>&1;; \
  esac
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
  for p in $$list; do echo "$$p $$p"; done | \
  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
    if (++n[$$2] == $(am__install_max)) \
      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
    END { for (dir in files) print dir, files[dir] }'
am__base_list = \
  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__uninstall_files_from_dir = { \
  test -z "$$files" \
    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
         $(am__cd) "$$dir" && rm -f $$files; }; \
  }
am__installdirs = "$(DESTDIR)$(include_sofiadir)"
HEADERS = $(nobase_include_sofia_HEADERS)
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
# Read a list of newline-separated strings from the standard input,
# and print each of them once, without duplicates.  Input order is
# *not* preserved.
am__uniquify_input = $(AWK) '\
  BEGIN { nonempty = 0; } \
  { items[$$0] = 1; nonempty = 1; } \
  END { if (nonempty) { for (i in items) print i; }; } \
'
# Make sure the list of sources is unique.  This is necessary because,
# e.g., the same source file might be shared among _SOURCES variables
# for different programs/libraries.
am__define_uniq_tagged_files = \
  list='$(am__tagged_files)'; \
  unique=`for i in $$list; do \
    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
  done | $(am__uniquify_input)`
CTAGS = ctags
am__tty_colors_dummy = \
  mgn= red= grn= lgn= blu= brg= std=; \
  am__color_tests=no
am__tty_colors = { \
  $(am__tty_colors_dummy); \
  if test "X$(AM_COLOR_TESTS)" = Xno; then \
    am__color_tests=no; \
  elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
    am__color_tests=yes; \
  elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
    am__color_tests=yes; \
  fi; \
  if test $$am__color_tests = yes; then \
    red='[0;31m'; \
    grn='[0;32m'; \
    lgn='[1;32m'; \
    blu='[1;34m'; \
    mgn='[0;35m'; \
    brg='[1m'; \
    std='[m'; \
  fi; \
}
am__recheck_rx = ^[ 	]*:recheck:[ 	]*
am__global_test_result_rx = ^[ 	]*:global-test-result:[ 	]*
am__copy_in_global_log_rx = ^[ 	]*:copy-in-global-log:[ 	]*
# A command that, given a newline-separated list of test names on the
# standard input, print the name of the tests that are to be re-run
# upon "make recheck".
am__list_recheck_tests = $(AWK) '{ \
  recheck = 1; \
  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
    { \
      if (rc < 0) \
        { \
          if ((getline line2 < ($$0 ".log")) < 0) \
	    recheck = 0; \
          break; \
        } \
      else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
        { \
          recheck = 0; \
          break; \
        } \
      else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
        { \
          break; \
        } \
    }; \
  if (recheck) \
    print $$0; \
  close ($$0 ".trs"); \
  close ($$0 ".log"); \
}'
# A command that, given a newline-separated list of test names on the
# standard input, create the global log from their .trs and .log files.
am__create_global_log = $(AWK) ' \
function fatal(msg) \
{ \
  print "fatal: making $@: " msg | "cat >&2"; \
  exit 1; \
} \
function rst_section(header) \
{ \
  print header; \
  len = length(header); \
  for (i = 1; i <= len; i = i + 1) \
    printf "="; \
  printf "\n\n"; \
} \
{ \
  copy_in_global_log = 1; \
  global_test_result = "RUN"; \
  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
    { \
      if (rc < 0) \
         fatal("failed to read from " $$0 ".trs"); \
      if (line ~ /$(am__global_test_result_rx)/) \
        { \
          sub("$(am__global_test_result_rx)", "", line); \
          sub("[ 	]*$$", "", line); \
          global_test_result = line; \
        } \
      else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
        copy_in_global_log = 0; \
    }; \
  if (copy_in_global_log) \
    { \
      rst_section(global_test_result ": " $$0); \
      while ((rc = (getline line < ($$0 ".log"))) != 0) \
      { \
        if (rc < 0) \
          fatal("failed to read from " $$0 ".log"); \
        print line; \
      }; \
      printf "\n"; \
    }; \
  close ($$0 ".trs"); \
  close ($$0 ".log"); \
}'
# Restructured Text title.
am__rst_title = { sed 's/.*/   &   /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
# Solaris 10 'make', and several other traditional 'make' implementations,
# pass "-e" to $(SHELL), and POSIX 2008 even requires this.  Work around it
# by disabling -e (using the XSI extension "set +e") if it's set.
am__sh_e_setup = case $$- in *e*) set +e;; esac
# Default flags passed to test drivers.
am__common_driver_flags = \
  --color-tests "$$am__color_tests" \
  --enable-hard-errors "$$am__enable_hard_errors" \
  --expect-failure "$$am__expect_failure"
# To be inserted before the command running the test.  Creates the
# directory for the log if needed.  Stores in $dir the directory
# containing $f, in $tst the test, in $log the log.  Executes the
# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
# passes TESTS_ENVIRONMENT.  Set up options for the wrapper that
# will run the test scripts (or their associated LOG_COMPILER, if
# thy have one).
am__check_pre = \
$(am__sh_e_setup);					\
$(am__vpath_adj_setup) $(am__vpath_adj)			\
$(am__tty_colors);					\
srcdir=$(srcdir); export srcdir;			\
case "$@" in						\
  */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;;	\
    *) am__odir=.;; 					\
esac;							\
test "x$$am__odir" = x"." || test -d "$$am__odir" 	\
  || $(MKDIR_P) "$$am__odir" || exit $$?;		\
if test -f "./$$f"; then dir=./;			\
elif test -f "$$f"; then dir=;				\
else dir="$(srcdir)/"; fi;				\
tst=$$dir$$f; log='$@'; 				\
if test -n '$(DISABLE_HARD_ERRORS)'; then		\
  am__enable_hard_errors=no; 				\
else							\
  am__enable_hard_errors=yes; 				\
fi; 							\
case " $(XFAIL_TESTS) " in				\
  *[\ \	]$$f[\ \	]* | *[\ \	]$$dir$$f[\ \	]*) \
    am__expect_failure=yes;;				\
  *)							\
    am__expect_failure=no;;				\
esac; 							\
$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
# A shell command to get the names of the tests scripts with any registered
# extension removed (i.e., equivalently, the names of the test logs, with
# the '.log' extension removed).  The result is saved in the shell variable
# '$bases'.  This honors runtime overriding of TESTS and TEST_LOGS.  Sadly,
# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
# since that might cause problem with VPATH rewrites for suffix-less tests.
# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
am__set_TESTS_bases = \
  bases='$(TEST_LOGS)'; \
  bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
  bases=`echo $$bases`
RECHECK_LOGS = $(TEST_LOGS)
AM_RECURSIVE_TARGETS = check recheck
TEST_SUITE_LOG = test-suite.log
TEST_EXTENSIONS = @EXEEXT@ .test
LOG_DRIVER = $(SHELL) $(top_srcdir)/test-driver
LOG_COMPILE = $(LOG_COMPILER) $(AM_LOG_FLAGS) $(LOG_FLAGS)
am__set_b = \
  case '$@' in \
    */*) \
      case '$*' in \
        */*) b='$*';; \
          *) b=`echo '$@' | sed 's/\.log$$//'`; \
       esac;; \
    *) \
      b='$*';; \
  esac
am__test_logs1 = $(TESTS:=.log)
am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
TEST_LOGS = $(am__test_logs2:.test.log=.log)
TEST_LOG_DRIVER = $(SHELL) $(top_srcdir)/test-driver
TEST_LOG_COMPILE = $(TEST_LOG_COMPILER) $(AM_TEST_LOG_FLAGS) \
	$(TEST_LOG_FLAGS)
am__DIST_COMMON = $(srcdir)/Doxyfile.in $(srcdir)/Makefile.in \
	$(top_srcdir)/depcomp $(top_srcdir)/rules/lcov.am \
	$(top_srcdir)/rules/silent.am $(top_srcdir)/rules/sofia.am \
	$(top_srcdir)/rules/valcheck.am $(top_srcdir)/test-driver \
	ChangeLog
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
ACLOCAL_AMFLAGS = @ACLOCAL_AMFLAGS@
ALLOCA = @ALLOCA@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AR = @AR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CHECK_CFLAGS = @CHECK_CFLAGS@
CHECK_LIBS = @CHECK_LIBS@
COVERAGE_FLAGS = @COVERAGE_FLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CWFLAG = @CWFLAG@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DLLTOOL = @DLLTOOL@
DOXYGEN = @DOXYGEN@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
ETAGS = @ETAGS@
EXEEXT = @EXEEXT@
FGREP = @FGREP@
GCOV = @GCOV@
GENHTML = @GENHTML@
GENPNG = @GENPNG@
GLIB_CFLAGS = @GLIB_CFLAGS@
GLIB_LIBS = @GLIB_LIBS@
GLIB_VERSION = @GLIB_VERSION@
GREP = @GREP@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LCOV = @LCOV@
LD = @LD@
LDFLAGS = @LDFLAGS@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LIBVER_SOFIA_SIP_UA_AGE = @LIBVER_SOFIA_SIP_UA_AGE@
LIBVER_SOFIA_SIP_UA_CUR = @LIBVER_SOFIA_SIP_UA_CUR@
LIBVER_SOFIA_SIP_UA_GLIB_AGE = @LIBVER_SOFIA_SIP_UA_GLIB_AGE@
LIBVER_SOFIA_SIP_UA_GLIB_CUR = @LIBVER_SOFIA_SIP_UA_GLIB_CUR@
LIBVER_SOFIA_SIP_UA_GLIB_REV = @LIBVER_SOFIA_SIP_UA_GLIB_REV@
LIBVER_SOFIA_SIP_UA_GLIB_SOVER = @LIBVER_SOFIA_SIP_UA_GLIB_SOVER@
LIBVER_SOFIA_SIP_UA_REV = @LIBVER_SOFIA_SIP_UA_REV@
LIBVER_SOFIA_SIP_UA_SOVER = @LIBVER_SOFIA_SIP_UA_SOVER@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
MINGW_ENVIRONMENT = @MINGW_ENVIRONMENT@
MKDIR_P = @MKDIR_P@
MOSTLYCLEANFILES = @MOSTLYCLEANFILES@
NM = @NM@
NMEDIT = @NMEDIT@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PKG_CONFIG = @PKG_CONFIG@
RANLIB = @RANLIB@
REPLACE_LIBADD = @REPLACE_LIBADD@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
SOFIA_CFLAGS = @SOFIA_CFLAGS@
SOFIA_GLIB_CFLAGS = @SOFIA_GLIB_CFLAGS@
SOFIA_GLIB_PKG_REQUIRES = @SOFIA_GLIB_PKG_REQUIRES@
SOFIA_PLAT_CFLAGS = @SOFIA_PLAT_CFLAGS@
STRIP = @STRIP@
TESTS_ENVIRONMENT = @TESTS_ENVIRONMENT@
VERSION = @VERSION@
VER_LIBSOFIA_SIP_UA_MAJOR_MINOR = @VER_LIBSOFIA_SIP_UA_MAJOR_MINOR@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
include_sofiadir = @include_sofiadir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
openssl_CFLAGS = @openssl_CFLAGS@
openssl_LIBS = @openssl_LIBS@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target = @target@
target_alias = @target_alias@
target_cpu = @target_cpu@
target_os = @target_os@
target_vendor = @target_vendor@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
AM_CPPFLAGS = -I$(srcdir)/../ipt -I../ipt \
		-I$(srcdir)/../iptsec -I../iptsec \
		-I$(srcdir)/../msg -I../msg \
		-I$(srcdir)/../bnf -I../bnf \
		-I$(srcdir)/../http -I../http \
		-I$(srcdir)/../sresolv -I../sresolv \
		-I$(srcdir)/../tport -I../tport \
		-I$(srcdir)/../url -I../url \
		-I$(srcdir)/../su -I../su


# ----------------------------------------------------------------------
# Build targets
noinst_LTLIBRARIES = libnth.la

# ----------------------------------------------------------------------
# Rules for building the targets
BUILT_SOURCES = nth_tag_ref.c
nobase_include_sofia_HEADERS = \
			sofia-sip/nth.h sofia-sip/nth_tag.h

libnth_la_SOURCES = nth_client.c nth_server.c nth_tag.c nth_tag_ref.c
COVERAGE_INPUT = $(libnth_la_SOURCES) $(include_sofia_HEADERS)
LDADD = libnth.la \
			../iptsec/libiptsec.la \
			../ipt/libipt.la \
			../http/libhttp.la \
			../sresolv/libsresolv.la \
			../tport/libtport.la \
			../stun/libstun.la \
			../sresolv/libsresolv.la \
			../url/liburl.la \
			../msg/libmsg.la \
			../bnf/libbnf.la \
			../su/libsu.la

test_nth_LDFLAGS = -static

# ----------------------------------------------------------------------
# Install and distribution rules
EXTRA_DIST = nth.docs $(BUILT_SOURCES) \
			agent.pem cafile.pem

sofiasrcdir = ${top_srcdir}/libsofia-sip-ua
sofiabuilddir = ${top_builddir}/libsofia-sip-ua
AM_CFLAGS = $(CWFLAG) $(SOFIA_COVERAGE) $(SOFIA_CFLAGS) \
	$(openssl_CFLAGS) $(SOFIA_PLAT_CFLAGS) $(am__append_1)
SOFIA_COVERAGE = $(COVERAGE_FLAGS)
DISTCLEANFILES = $(BUILT_SOURCES)

# rules for building tag files
TAG_AWK = ${sofiasrcdir}/su/tag_dll.awk
SUFFIXES = _tag_ref.c _tag.c
INTERNAL_INCLUDES = \
    -I${sofiasrcdir}/features -I${sofiabuilddir}/features \
    -I${sofiasrcdir}/ipt -I${sofiabuilddir}/ipt \
    -I${sofiasrcdir}/iptsec -I${sofiabuilddir}/iptsec \
    -I${sofiasrcdir}/bnf -I${sofiabuilddir}/bnf \
    -I${sofiasrcdir}/http -I${sofiabuilddir}/http \
    -I${sofiasrcdir}/msg -I${sofiabuilddir}/msg \
    -I${sofiasrcdir}/nth -I${sofiabuilddir}/nth \
    -I${sofiasrcdir}/nta -I${sofiabuilddir}/nta \
    -I${sofiasrcdir}/nea -I${sofiabuilddir}/nea \
    -I${sofiasrcdir}/nua -I${sofiabuilddir}/nua \
    -I${sofiasrcdir}/soa -I${sofiabuilddir}/soa \
    -I${sofiasrcdir}/sdp -I${sofiabuilddir}/sdp \
    -I${sofiasrcdir}/sip -I${sofiabuilddir}/sip \
    -I${sofiasrcdir}/soa -I${sofiabuilddir}/soa \
    -I${sofiasrcdir}/sresolv -I${sofiabuilddir}/sresolv \
    -I${sofiasrcdir}/tport -I${sofiabuilddir}/tport \
    -I${sofiasrcdir}/stun -I${sofiabuilddir}/stun \
    -I${sofiasrcdir}/url -I${sofiabuilddir}/url \
    -I${sofiasrcdir}/su -I${sofiabuilddir}/su

PHONY = built-sources clean-built-sources $(am__append_3)
VALGRIND = valgrind
VALGRINDFLAGS = --tool=memcheck

# Scripts
@HAVE_LCOV_TRUE@LCOV_UNCOVERED = ${top_srcdir}/scripts/uncovered
@HAVE_LCOV_TRUE@LCOV_REPORT = ${top_srcdir}/scripts/lcov-report

# Report directory
@HAVE_LCOV_TRUE@lcovdir = ${top_builddir}/lcov

# Options
@HAVE_LCOV_TRUE@GENHTML_OPTIONS = --show-details --legend \
@HAVE_LCOV_TRUE@	$(am__append_2)

# Fancy shell command that expands to directory relative to top_builddir
@HAVE_LCOV_TRUE@expand_subdir = `pwd|sed "s'\`cd ${top_builddir};pwd\`''"`
SOFIA_SILENT = @
LIBTOOL_FLAGS = --silent

# From Automake 1.9.6 - 
LTCOMPILE = $(LIBTOOL) --tag=CC --mode=compile $(LIBTOOL_FLAGS) \
	$(CC) $(DEFS) \
	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
	$(AM_CFLAGS) $(CFLAGS)

LINK = ${SOFIA_SILENT}test "${SOFIA_SILENT}" != @ || echo '	 LINK $@'; \
	$(LIBTOOL) --tag=CC --mode=link $(LIBTOOL_FLAGS) \
	$(CCLD) $(AM_CFLAGS) $(CFLAGS) \
	$(AM_LDFLAGS) $(LDFLAGS) -o $@

all: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) all-am

.SUFFIXES:
.SUFFIXES: _tag_ref.c _tag.c .c .lo .log .o .obj .test .test$(EXEEXT) .trs
$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am $(top_srcdir)/rules/sofia.am $(top_srcdir)/rules/valcheck.am $(top_srcdir)/rules/lcov.am $(top_srcdir)/rules/silent.am $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
	        && { if test -f $@; then exit 0; else break; fi; }; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign libsofia-sip-ua/nth/Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --foreign libsofia-sip-ua/nth/Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;
$(top_srcdir)/rules/sofia.am $(top_srcdir)/rules/valcheck.am $(top_srcdir)/rules/lcov.am $(top_srcdir)/rules/silent.am $(am__empty):

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure:  $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):
Doxyfile: $(top_builddir)/config.status $(srcdir)/Doxyfile.in
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@

clean-noinstLTLIBRARIES:
	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
	@list='$(noinst_LTLIBRARIES)'; \
	locs=`for p in $$list; do echo $$p; done | \
	      sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \
	      sort -u`; \
	test -z "$$locs" || { \
	  echo rm -f $${locs}; \
	  rm -f $${locs}; \
	}

libnth.la: $(libnth_la_OBJECTS) $(libnth_la_DEPENDENCIES) $(EXTRA_libnth_la_DEPENDENCIES) 
	$(AM_V_CCLD)$(LINK)  $(libnth_la_OBJECTS) $(libnth_la_LIBADD) $(LIBS)

clean-checkPROGRAMS:
	@list='$(check_PROGRAMS)'; test -n "$$list" || exit 0; \
	echo " rm -f" $$list; \
	rm -f $$list || exit $$?; \
	test -n "$(EXEEXT)" || exit 0; \
	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
	echo " rm -f" $$list; \
	rm -f $$list

http-client$(EXEEXT): $(http_client_OBJECTS) $(http_client_DEPENDENCIES) $(EXTRA_http_client_DEPENDENCIES) 
	@rm -f http-client$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(http_client_OBJECTS) $(http_client_LDADD) $(LIBS)

http-server$(EXEEXT): $(http_server_OBJECTS) $(http_server_DEPENDENCIES) $(EXTRA_http_server_DEPENDENCIES) 
	@rm -f http-server$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(http_server_OBJECTS) $(http_server_LDADD) $(LIBS)

test_nth$(EXEEXT): $(test_nth_OBJECTS) $(test_nth_DEPENDENCIES) $(EXTRA_test_nth_DEPENDENCIES) 
	@rm -f test_nth$(EXEEXT)
	$(AM_V_CCLD)$(test_nth_LINK) $(test_nth_OBJECTS) $(test_nth_LDADD) $(LIBS)

mostlyclean-compile:
	-rm -f *.$(OBJEXT)

distclean-compile:
	-rm -f *.tab.c

@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/http-client.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/http-server.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/nth_client.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/nth_server.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/nth_tag.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/nth_tag_ref.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/test_nth.Po@am__quote@

.c.obj:
@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs
install-nobase_include_sofiaHEADERS: $(nobase_include_sofia_HEADERS)
	@$(NORMAL_INSTALL)
	@list='$(nobase_include_sofia_HEADERS)'; test -n "$(include_sofiadir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(include_sofiadir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(include_sofiadir)" || exit 1; \
	fi; \
	$(am__nobase_list) | while read dir files; do \
	  xfiles=; for file in $$files; do \
	    if test -f "$$file"; then xfiles="$$xfiles $$file"; \
	    else xfiles="$$xfiles $(srcdir)/$$file"; fi; done; \
	  test -z "$$xfiles" || { \
	    test "x$$dir" = x. || { \
	      echo " $(MKDIR_P) '$(DESTDIR)$(include_sofiadir)/$$dir'"; \
	      $(MKDIR_P) "$(DESTDIR)$(include_sofiadir)/$$dir"; }; \
	    echo " $(INSTALL_HEADER) $$xfiles '$(DESTDIR)$(include_sofiadir)/$$dir'"; \
	    $(INSTALL_HEADER) $$xfiles "$(DESTDIR)$(include_sofiadir)/$$dir" || exit $$?; }; \
	done

uninstall-nobase_include_sofiaHEADERS:
	@$(NORMAL_UNINSTALL)
	@list='$(nobase_include_sofia_HEADERS)'; test -n "$(include_sofiadir)" || list=; \
	$(am__nobase_strip_setup); files=`$(am__nobase_strip)`; \
	dir='$(DESTDIR)$(include_sofiadir)'; $(am__uninstall_files_from_dir)

ID: $(am__tagged_files)
	$(am__define_uniq_tagged_files); mkid -fID $$unique
tags: tags-am
TAGS: tags

tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
	set x; \
	here=`pwd`; \
	$(am__define_uniq_tagged_files); \
	shift; \
	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  if test $$# -gt 0; then \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      "$$@" $$unique; \
	  else \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      $$unique; \
	  fi; \
	fi
ctags: ctags-am

CTAGS: ctags
ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
	$(am__define_uniq_tagged_files); \
	test -z "$(CTAGS_ARGS)$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && $(am__cd) $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) "$$here"
cscopelist: cscopelist-am

cscopelist-am: $(am__tagged_files)
	list='$(am__tagged_files)'; \
	case "$(srcdir)" in \
	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
	  *) sdir=$(subdir)/$(srcdir) ;; \
	esac; \
	for i in $$list; do \
	  if test -f "$$i"; then \
	    echo "$(subdir)/$$i"; \
	  else \
	    echo "$$sdir/$$i"; \
	  fi; \
	done >> $(top_builddir)/cscope.files

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

# Recover from deleted '.trs' file; this should ensure that
# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
# both 'foo.log' and 'foo.trs'.  Break the recipe in two subshells
# to avoid problems with "make -n".
.log.trs:
	rm -f $< $@
	$(MAKE) $(AM_MAKEFLAGS) $<

# Leading 'am--fnord' is there to ensure the list of targets does not
# expand to empty, as could happen e.g. with make check TESTS=''.
am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
am--force-recheck:
	@:

$(TEST_SUITE_LOG): $(TEST_LOGS)
	@$(am__set_TESTS_bases); \
	am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
	redo_bases=`for i in $$bases; do \
	              am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
	            done`; \
	if test -n "$$redo_bases"; then \
	  redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
	  redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
	  if $(am__make_dryrun); then :; else \
	    rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
	  fi; \
	fi; \
	if test -n "$$am__remaking_logs"; then \
	  echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
	       "recursion detected" >&2; \
	elif test -n "$$redo_logs"; then \
	  am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
	fi; \
	if $(am__make_dryrun); then :; else \
	  st=0;  \
	  errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
	  for i in $$redo_bases; do \
	    test -f $$i.trs && test -r $$i.trs \
	      || { echo "$$errmsg $$i.trs" >&2; st=1; }; \
	    test -f $$i.log && test -r $$i.log \
	      || { echo "$$errmsg $$i.log" >&2; st=1; }; \
	  done; \
	  test $$st -eq 0 || exit 1; \
	fi
	@$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
	ws='[ 	]'; \
	results=`for b in $$bases; do echo $$b.trs; done`; \
	test -n "$$results" || results=/dev/null; \
	all=`  grep "^$$ws*:test-result:"           $$results | wc -l`; \
	pass=` grep "^$$ws*:test-result:$$ws*PASS"  $$results | wc -l`; \
	fail=` grep "^$$ws*:test-result:$$ws*FAIL"  $$results | wc -l`; \
	skip=` grep "^$$ws*:test-result:$$ws*SKIP"  $$results | wc -l`; \
	xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
	xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
	error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
	if test `expr $$fail + $$xpass + $$error` -eq 0; then \
	  success=true; \
	else \
	  success=false; \
	fi; \
	br='==================='; br=$$br$$br$$br$$br; \
	result_count () \
	{ \
	    if test x"$$1" = x"--maybe-color"; then \
	      maybe_colorize=yes; \
	    elif test x"$$1" = x"--no-color"; then \
	      maybe_colorize=no; \
	    else \
	      echo "$@: invalid 'result_count' usage" >&2; exit 4; \
	    fi; \
	    shift; \
	    desc=$$1 count=$$2; \
	    if test $$maybe_colorize = yes && test $$count -gt 0; then \
	      color_start=$$3 color_end=$$std; \
	    else \
	      color_start= color_end=; \
	    fi; \
	    echo "$${color_start}# $$desc $$count$${color_end}"; \
	}; \
	create_testsuite_report () \
	{ \
	  result_count $$1 "TOTAL:" $$all   "$$brg"; \
	  result_count $$1 "PASS: " $$pass  "$$grn"; \
	  result_count $$1 "SKIP: " $$skip  "$$blu"; \
	  result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
	  result_count $$1 "FAIL: " $$fail  "$$red"; \
	  result_count $$1 "XPASS:" $$xpass "$$red"; \
	  result_count $$1 "ERROR:" $$error "$$mgn"; \
	}; \
	{								\
	  echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" |	\
	    $(am__rst_title);						\
	  create_testsuite_report --no-color;				\
	  echo;								\
	  echo ".. contents:: :depth: 2";				\
	  echo;								\
	  for b in $$bases; do echo $$b; done				\
	    | $(am__create_global_log);					\
	} >$(TEST_SUITE_LOG).tmp || exit 1;				\
	mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG);			\
	if $$success; then						\
	  col="$$grn";							\
	 else								\
	  col="$$red";							\
	  test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG);		\
	fi;								\
	echo "$${col}$$br$${std}"; 					\
	echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}";	\
	echo "$${col}$$br$${std}"; 					\
	create_testsuite_report --maybe-color;				\
	echo "$$col$$br$$std";						\
	if $$success; then :; else					\
	  echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}";		\
	  if test -n "$(PACKAGE_BUGREPORT)"; then			\
	    echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}";	\
	  fi;								\
	  echo "$$col$$br$$std";					\
	fi;								\
	$$success || exit 1

check-TESTS:
	@list='$(RECHECK_LOGS)';           test -z "$$list" || rm -f $$list
	@list='$(RECHECK_LOGS:.log=.trs)'; test -z "$$list" || rm -f $$list
	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
	@set +e; $(am__set_TESTS_bases); \
	log_list=`for i in $$bases; do echo $$i.log; done`; \
	trs_list=`for i in $$bases; do echo $$i.trs; done`; \
	log_list=`echo $$log_list`; trs_list=`echo $$trs_list`; \
	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) TEST_LOGS="$$log_list"; \
	exit $$?;
recheck: all $(check_PROGRAMS)
	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
	@set +e; $(am__set_TESTS_bases); \
	bases=`for i in $$bases; do echo $$i; done \
	         | $(am__list_recheck_tests)` || exit 1; \
	log_list=`for i in $$bases; do echo $$i.log; done`; \
	log_list=`echo $$log_list`; \
	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
	        am__force_recheck=am--force-recheck \
	        TEST_LOGS="$$log_list"; \
	exit $$?
test_nth.log: test_nth$(EXEEXT)
	@p='test_nth$(EXEEXT)'; \
	b='test_nth'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
.test.log:
	@p='$<'; \
	$(am__set_b); \
	$(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
@am__EXEEXT_TRUE@.test$(EXEEXT).log:
@am__EXEEXT_TRUE@	@p='$<'; \
@am__EXEEXT_TRUE@	$(am__set_b); \
@am__EXEEXT_TRUE@	$(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \
@am__EXEEXT_TRUE@	--log-file $$b.log --trs-file $$b.trs \
@am__EXEEXT_TRUE@	$(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \
@am__EXEEXT_TRUE@	"$$tst" $(AM_TESTS_FD_REDIRECT)

distdir: $(DISTFILES)
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d "$(distdir)/$$file"; then \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
	  else \
	    test -f "$(distdir)/$$file" \
	    || cp -p $$d/$$file "$(distdir)/$$file" \
	    || exit 1; \
	  fi; \
	done
check-am: all-am
	$(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS)
	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
check: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) check-am
all-am: Makefile $(LTLIBRARIES) $(HEADERS)
installdirs:
	for dir in "$(DESTDIR)$(include_sofiadir)"; do \
	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
	done
install: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	if test -z '$(STRIP)'; then \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	      install; \
	else \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
	fi
mostlyclean-generic:
	-test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)
	-test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
	-test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs)
	-test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)

clean-generic:

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
	-test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
@HAVE_LCOV_FALSE@clean-local:
clean: clean-am

clean-am: clean-checkPROGRAMS clean-generic clean-libtool clean-local \
	clean-noinstLTLIBRARIES mostlyclean-am

distclean: distclean-am
	-rm -rf ./$(DEPDIR)
	-rm -f Makefile
distclean-am: clean-am distclean-compile distclean-generic \
	distclean-tags

dvi: dvi-am

dvi-am:

html: html-am

html-am:

info: info-am

info-am:

install-data-am: install-nobase_include_sofiaHEADERS

install-dvi: install-dvi-am

install-dvi-am:

install-exec-am:

install-html: install-html-am

install-html-am:

install-info: install-info-am

install-info-am:

install-man:

install-pdf: install-pdf-am

install-pdf-am:

install-ps: install-ps-am

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-am
	-rm -rf ./$(DEPDIR)
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-compile mostlyclean-generic \
	mostlyclean-libtool

pdf: pdf-am

pdf-am:

ps: ps-am

ps-am:

uninstall-am: uninstall-nobase_include_sofiaHEADERS

.MAKE: all check check-am install install-am install-strip

.PHONY: CTAGS GTAGS TAGS all all-am check check-TESTS check-am clean \
	clean-checkPROGRAMS clean-generic clean-libtool clean-local \
	clean-noinstLTLIBRARIES cscopelist-am ctags ctags-am distclean \
	distclean-compile distclean-generic distclean-libtool \
	distclean-tags distdir dvi dvi-am html html-am info info-am \
	install install-am install-data install-data-am install-dvi \
	install-dvi-am install-exec install-exec-am install-html \
	install-html-am install-info install-info-am install-man \
	install-nobase_include_sofiaHEADERS install-pdf install-pdf-am \
	install-ps install-ps-am install-strip installcheck \
	installcheck-am installdirs maintainer-clean \
	maintainer-clean-generic mostlyclean mostlyclean-compile \
	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
	recheck tags tags-am uninstall uninstall-am \
	uninstall-nobase_include_sofiaHEADERS

.PRECIOUS: Makefile


built-sources: $(BUILT_SOURCES)

clean-built-sources:
	-rm -rf $(BUILT_SOURCES) $(BUILT_SOURCES:%=$(srcdir)/%)

*_tag_ref.c: $(TAG_AWK)

_tag.c_tag_ref.c:
	$(AWK) -f $(TAG_AWK) NODLL=1 $(TAG_DLL_FLAGS) REF=$@ $<

../bnf/libbnf.la ../http/libhttp.la ../ipt/libipt.la ../iptsec/libiptsec.la \
 ../msg/libmsg.la ../nea/libnea.la ../nta/libnta.la ../nth/libnth.la \
 ../nua/libnua.la ../sdp/libsdp.la ../sip/libsip.la ../soa/libsoa.la \
 ../sresolv/libsresolv.la ../stun/libstun.la ../su/libsu.la \
 ../tport/libtport.la ../url/liburl.la:
	cd $(@D) && $(MAKE) $(@F)

checklib: $(noinst_LTLIBRARIES) $(check_LTLIBRARIES)

valcheck: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) valcheck-am

valcheck-am: all-am
	$(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS)
	$(MAKE) $(AM_MAKEFLAGS) valcheck-TESTS

# Run tests with valgrind in
valcheck-TESTS:	$(TESTS)
	@failed=0; all=0; xfail=0; xpass=0; skip=0; \
	srcdir=$(srcdir); export srcdir; \
	list='$(TESTS)'; \
	if test -n "$$list"; then \
	  for tst in $$list; do \
	    if test -f ./$$tst; then dir=./; \
	    elif test -f $$tst; then dir=; \
	    else dir="$(srcdir)/"; fi; \
	    if case $$tst in \
            run*) VALGRIND="$(VALGRIND) $(VALGRINDFLAGS)" \
		  $(TESTS_ENVIRONMENT) $${dir}$$tst ;; \
	    *) $(TESTS_ENVIRONMENT) $(VALGRIND) $(VALGRINDFLAGS) \
	       $${dir}$$tst ;; \
	    esac ; then \
	      all=`expr $$all + 1`; \
	      case " $(XFAIL_TESTS) " in \
	      *" $$tst "*) \
		xpass=`expr $$xpass + 1`; \
		failed=`expr $$failed + 1`; \
		echo "XPASS: $$tst"; \
	      ;; \
	      *) \
		echo "PASS: $$tst"; \
	      ;; \
	      esac; \
	    elif test $$? -ne 77; then \
	      all=`expr $$all + 1`; \
	      case " $(XFAIL_TESTS) " in \
	      *" $$tst "*) \
		xfail=`expr $$xfail + 1`; \
		echo "XFAIL: $$tst"; \
	      ;; \
	      *) \
		failed=`expr $$failed + 1`; \
		echo "FAIL: $$tst"; \
	      ;; \
	      esac; \
	    else \
	      skip=`expr $$skip + 1`; \
	      echo "SKIP: $$tst"; \
	    fi; \
	  done; \
	  if test "$$failed" -eq 0; then \
	    if test "$$xfail" -eq 0; then \
	      banner="All $$all tests passed"; \
	    else \
	      banner="All $$all tests behaved as expected ($$xfail expected failures)"; \
	    fi; \
	  else \
	    if test "$$xpass" -eq 0; then \
	      banner="$$failed of $$all tests failed"; \
	    else \
	      banner="$$failed of $$all tests did not behave as expected ($$xpass unexpected passes)"; \
	    fi; \
	  fi; \
	  dashes="$$banner"; \
	  skipped=""; \
	  if test "$$skip" -ne 0; then \
	    skipped="($$skip tests were not run)"; \
	    test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \
	      dashes="$$skipped"; \
	  fi; \
	  report=""; \
	  if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \
	    report="Please report to $(PACKAGE_BUGREPORT)"; \
	    test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \
	      dashes="$$report"; \
	  fi; \
	  dashes=`echo "$$dashes" | sed s/./=/g`; \
	  echo "$$dashes"; \
	  echo "$$banner"; \
	  test -z "$$skipped" || echo "$$skipped"; \
	  test -z "$$report" || echo "$$report"; \
	  echo "$$dashes"; \
	  test "$$failed" -eq 0; \
	else :; fi

#
# Generate pretty coverage report (unless it has been already done)
#
@HAVE_LCOV_TRUE@lcov:
@HAVE_LCOV_TRUE@	@-test -r ${lcovdir}${expand_subdir}/lcov.info \
@HAVE_LCOV_TRUE@	|| make lcov-report

# Generate pretty coverage report based on current coverage data
@HAVE_LCOV_TRUE@lcov-report:
@HAVE_LCOV_TRUE@	sub=${expand_subdir} odir=${lcovdir}$$sub ; \
@HAVE_LCOV_TRUE@	rm -rf $$odir ; mkdir -p $$odir && \
@HAVE_LCOV_TRUE@	${LCOV_REPORT} ${GENHTML_OPTIONS} \
@HAVE_LCOV_TRUE@          --title "${PACKAGE_NAME}-${PACKAGE_VERSION}$$sub" \
@HAVE_LCOV_TRUE@	  --srcdir=${srcdir} -o $$odir

# Rerun checks before generating report
@HAVE_LCOV_TRUE@lcov-rerun: clean-lcov
@HAVE_LCOV_TRUE@	$(MAKE) $(AM_MAKEFLAGS) check
@HAVE_LCOV_TRUE@	$(MAKE) $(AM_MAKEFLAGS) lcov-report

# Show all uncovered lines as errors
@HAVE_LCOV_TRUE@uncovered:
@HAVE_LCOV_TRUE@	${LCOV_UNCOVERED} --lcov-dir=${lcovdir} --srcdir=${srcdir}

# Run check in current dir and show all uncovered lines as errors
@HAVE_LCOV_TRUE@covcheck:
@HAVE_LCOV_TRUE@	-find . -name "*.gcda" | xargs rm -rf
@HAVE_LCOV_TRUE@	$(MAKE) $(AM_MAKEFLAGS) check
@HAVE_LCOV_TRUE@	${LCOV_UNCOVERED} --lcov-dir=${lcovdir} --srcdir=${srcdir}

@HAVE_LCOV_TRUE@clean-local::
@HAVE_LCOV_TRUE@	-rm -rf ${lcovdir}`pwd|sed "s'\`cd ${top_builddir};pwd\`''"`
@HAVE_LCOV_TRUE@	find . -name "*.gcda" | xargs rm -f || true

@HAVE_LCOV_TRUE@clean-lcov:
@HAVE_LCOV_TRUE@	-rm -rf ${lcovdir}`pwd|sed "s'\`cd ${top_builddir};pwd\`''"`
@HAVE_LCOV_TRUE@	find . -name "*.gcda" | xargs rm -f || true

# Rules from depend2.am (GENERIC = TRUE, SUBDIROBJ = FALSE, %FASTDEP% = am_fastdepCC) silenced. 
.c.o:
	@test "${SOFIA_SILENT}" != @ || echo '	 COMPILE $@'
@am__fastdepCC_TRUE@	${SOFIA_SILENT}if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
@AMDEP_TRUE@@am__fastdepCC_FALSE@	${SOFIA_SILENT}source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR="$(DEPDIR)" $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(COMPILE) -c -o $@ $<
@AMDEP_FALSE@@am__fastdepCC_FALSE@	${SOFIA_SILENT}$(COMPILE) -c -o $@ $<

.c.lo:
	@test "${SOFIA_SILENT}" != @ || echo '	 LTCOMPILE $@'
@am__fastdepCC_TRUE@	${SOFIA_SILENT}if $(LTCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
@AMDEP_TRUE@@am__fastdepCC_FALSE@	${SOFIA_SILENT}source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR="$(DEPDIR)" $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
@AMDEP_FALSE@@am__fastdepCC_FALSE@	${SOFIA_SILENT}$(LTCOMPILE) -c -o $@ $<

# endif

# ----------------------------------------------------------------------
# Sofia specific rules

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
