
=pod

=head1 NAME

PostgresNode - class representing PostgreSQL server instance

=head1 SYNOPSIS

  use PostgresNode;

  my $node = PostgresNode->get_new_node('mynode');

  # Create a data directory with initdb
  $node->init();

  # Start the PostgreSQL server
  $node->start();

  # Change a setting and restart
  $node->append_conf('postgresql.conf', 'hot_standby = on');
  $node->restart();

  # run a query with psql, like:
  #   echo 'SELECT 1' | psql -qAXt postgres -v ON_ERROR_STOP=1
  $psql_stdout = $node->safe_psql('postgres', 'SELECT 1');

  # Run psql with a timeout, capturing stdout and stderr
  # as well as the psql exit code. Pass some extra psql
  # options. If there's an error from psql raise an exception.
  my ($stdout, $stderr, $timed_out);
  my $cmdret = $node->psql('postgres', 'SELECT pg_sleep(60)',
	  stdout => \$stdout, stderr => \$stderr,
	  timeout => 30, timed_out => \$timed_out,
	  extra_params => ['--single-transaction'],
	  on_error_die => 1)
  print "Sleep timed out" if $timed_out;

  # Similar thing, more convenient in common cases
  my ($cmdret, $stdout, $stderr) =
      $node->psql('postgres', 'SELECT 1');

  # run query every second until it returns 't'
  # or times out
  $node->poll_query_until('postgres', q|SELECT random() < 0.1;|')
    or print "timed out";

  # Do an online pg_basebackup
  my $ret = $node->backup('testbackup1');

  # Take a backup of a running server
  my $ret = $node->backup_fs_hot('testbackup2');

  # Take a backup of a stopped server
  $node->stop;
  my $ret = $node->backup_fs_cold('testbackup3')

  # Restore it to create a new independent node (not a replica)
  my $replica = get_new_node('replica');
  $replica->init_from_backup($node, 'testbackup');
  $replica->start;

  # Stop the server
  $node->stop('fast');

=head1 DESCRIPTION

PostgresNode contains a set of routines able to work on a PostgreSQL node,
allowing to start, stop, backup and initialize it with various options.
The set of nodes managed by a given test is also managed by this module.

In addition to node management, PostgresNode instances have some wrappers
around Test::More functions to run commands with an environment set up to
point to the instance.

The IPC::Run module is required.

=cut

package PostgresNode;

use strict;
use warnings;

use Config;
use Cwd;
use Exporter 'import';
use File::Basename;
use File::Spec;
use File::Temp ();
use IPC::Run;
use RecursiveCopy;
use Socket;
use Test::More;
use TestLib ();
use Scalar::Util qw(blessed);

our @EXPORT = qw(
  get_new_node
);

our ($test_localhost, $test_pghost, $last_port_assigned, @all_nodes);

# Windows path to virtual file system root

our $vfs_path = '';
if ($Config{osname} eq 'msys')
{
	$vfs_path = `cd / && pwd -W`;
	chomp $vfs_path;
}

INIT
{

	# PGHOST is set once and for all through a single series of tests when
	# this module is loaded.
	$test_localhost = "127.0.0.1";
	$test_pghost =
	  $TestLib::windows_os ? $test_localhost : TestLib::tempdir_short;
	$ENV{PGHOST}     = $test_pghost;
	$ENV{PGDATABASE} = 'postgres';

	# Tracking of last port value assigned to accelerate free port lookup.
	$last_port_assigned = int(rand() * 16384) + 49152;
}

=pod

=head1 METHODS

=over

=item PostgresNode::new($class, $name, $pghost, $pgport)

Create a new PostgresNode instance. Does not initdb or start it.

You should generally prefer to use get_new_node() instead since it takes care
of finding port numbers, registering instances for cleanup, etc.

=cut

sub new
{
	my ($class, $name, $pghost, $pgport) = @_;
	my $testname = basename($0);
	$testname =~ s/\.[^.]+$//;
	my $self = {
		_port    => $pgport,
		_host    => $pghost,
		_basedir => TestLib::tempdir("data_" . $name),
		_name    => $name,
		_logfile => "$TestLib::log_path/${testname}_${name}.log" };

	bless $self, $class;
	$self->dump_info;

	return $self;
}

=pod

=item $node->port()

Get the port number assigned to the host. This won't necessarily be a TCP port
open on the local host since we prefer to use unix sockets if possible.

Use $node->connstr() if you want a connection string.

=cut

sub port
{
	my ($self) = @_;
	return $self->{_port};
}

=pod

=item $node->host()

Return the host (like PGHOST) for this instance. May be a UNIX socket path.

Use $node->connstr() if you want a connection string.

=cut

sub host
{
	my ($self) = @_;
	return $self->{_host};
}

=pod

=item $node->basedir()

The directory all the node's files will be within - datadir, archive directory,
backups, etc.

=cut

sub basedir
{
	my ($self) = @_;
	return $self->{_basedir};
}

=pod

=item $node->name()

The name assigned to the node at creation time.

=cut

sub name
{
	my ($self) = @_;
	return $self->{_name};
}

=pod

=item $node->logfile()

Path to the PostgreSQL log file for this instance.

=cut

sub logfile
{
	my ($self) = @_;
	return $self->{_logfile};
}

=pod

=item $node->connstr()

Get a libpq connection string that will establish a connection to
this node. Suitable for passing to psql, DBD::Pg, etc.

=cut

sub connstr
{
	my ($self, $dbname) = @_;
	my $pgport = $self->port;
	my $pghost = $self->host;
	if (!defined($dbname))
	{
		return "port=$pgport host=$pghost";
	}
	return "port=$pgport host=$pghost dbname=$dbname";
}

=pod

=item $node->data_dir()

Returns the path to the data directory. postgresql.conf and pg_hba.conf are
always here.

=cut

sub data_dir
{
	my ($self) = @_;
	my $res = $self->basedir;
	return "$res/pgdata";
}

=pod

=item $node->archive_dir()

If archiving is enabled, WAL files go here.

=cut

sub archive_dir
{
	my ($self) = @_;
	my $basedir = $self->basedir;
	return "$basedir/archives";
}

=pod

=item $node->backup_dir()

The output path for backups taken with $node->backup()

=cut

sub backup_dir
{
	my ($self) = @_;
	my $basedir = $self->basedir;
	return "$basedir/backup";
}

=pod

=item $node->info()

Return a string containing human-readable diagnostic information (paths, etc)
about this node.

=cut

sub info
{
	my ($self) = @_;
	my $_info = '';
	open my $fh, '>', \$_info or die;
	print $fh "Name: " . $self->name . "\n";
	print $fh "Data directory: " . $self->data_dir . "\n";
	print $fh "Backup directory: " . $self->backup_dir . "\n";
	print $fh "Archive directory: " . $self->archive_dir . "\n";
	print $fh "Connection string: " . $self->connstr . "\n";
	print $fh "Log file: " . $self->logfile . "\n";
	close $fh or die;
	return $_info;
}

=pod

=item $node->dump_info()

Print $node->info()

=cut

sub dump_info
{
	my ($self) = @_;
	print $self->info;
}


# Internal method to set up trusted pg_hba.conf for replication.  Not
# documented because you shouldn't use it, it's called automatically if needed.
sub set_replication_conf
{
	my ($self) = @_;
	my $pgdata = $self->data_dir;

	$self->host eq $test_pghost
	  or die "set_replication_conf only works with the default host";

	open my $hba, ">>$pgdata/pg_hba.conf";
	print $hba "\n# Allow replication (set up by PostgresNode.pm)\n";
	if (!$TestLib::windows_os)
	{
		print $hba "local replication all trust\n";
	}
	else
	{
		print $hba
"host replication all $test_localhost/32 sspi include_realm=1 map=regress\n";
	}
	close $hba;
}

=pod

=item $node->init(...)

Initialize a new cluster for testing.

Authentication is set up so that only the current OS user can access the
cluster. On Unix, we use Unix domain socket connections, with the socket in
a directory that's only accessible to the current user to ensure that.
On Windows, we use SSPI authentication to ensure the same (by pg_regress
--config-auth).

pg_hba.conf is configured to allow replication connections. Pass the keyword
parameter hba_permit_replication => 0 to disable this.

WAL archiving can be enabled on this node by passing the keyword parameter
has_archiving => 1. This is disabled by default.

postgresql.conf can be set up for replication by passing the keyword
parameter allows_streaming => 1. This is disabled by default.

The new node is set up in a fast but unsafe configuration where fsync is
disabled.

=cut

sub init
{
	my ($self, %params) = @_;
	my $port   = $self->port;
	my $pgdata = $self->data_dir;
	my $host   = $self->host;

	$params{hba_permit_replication} = 1
	  unless defined $params{hba_permit_replication};
	$params{allows_streaming} = 0 unless defined $params{allows_streaming};
	$params{has_archiving}    = 0 unless defined $params{has_archiving};

	mkdir $self->backup_dir;
	mkdir $self->archive_dir;

	TestLib::system_or_bail('initdb', '-D', $pgdata, '-A', 'trust', '-N');
	TestLib::system_or_bail($ENV{PG_REGRESS}, '--config-auth', $pgdata);

	open my $conf, ">>$pgdata/postgresql.conf";
	print $conf "\n# Added by PostgresNode.pm\n";
	print $conf "fsync = off\n";
	print $conf "restart_after_crash = off\n";
	print $conf "log_statement = all\n";
	print $conf "wal_retrieve_retry_interval = '500ms'\n";
	print $conf "port = $port\n";

	if ($params{allows_streaming})
	{
		print $conf "wal_level = replica\n";
		print $conf "max_wal_senders = 5\n";
		print $conf "wal_keep_segments = 20\n";
		print $conf "max_wal_size = 128MB\n";
		print $conf "shared_buffers = 1MB\n";
		print $conf "wal_log_hints = on\n";
		print $conf "hot_standby = on\n";
		print $conf "max_connections = 10\n";
	}

	if ($TestLib::windows_os)
	{
		print $conf "listen_addresses = '$host'\n";
	}
	else
	{
		print $conf "unix_socket_directories = '$host'\n";
		print $conf "listen_addresses = ''\n";
	}
	close $conf;

	$self->set_replication_conf if $params{hba_permit_replication};
	$self->enable_archiving     if $params{has_archiving};
}

=pod

=item $node->append_conf(filename, str)

A shortcut method to append to files like pg_hba.conf and postgresql.conf.

Does no validation or sanity checking. Does not reload the configuration
after writing.

A newline is automatically appended to the string.

=cut

sub append_conf
{
	my ($self, $filename, $str) = @_;

	my $conffile = $self->data_dir . '/' . $filename;

	TestLib::append_to_file($conffile, $str . "\n");
}

=pod

=item $node->backup(backup_name)

Create a hot backup with B<pg_basebackup> in subdirectory B<backup_name> of
B<< $node->backup_dir >>, including the transaction logs. Transaction logs are
fetched at the end of the backup, not streamed.

You'll have to configure a suitable B<max_wal_senders> on the
target server since it isn't done by default.

=cut

sub backup
{
	my ($self, $backup_name) = @_;
	my $backup_path = $self->backup_dir . '/' . $backup_name;
	my $port        = $self->port;
	my $name        = $self->name;

	print "# Taking pg_basebackup $backup_name from node \"$name\"\n";
	TestLib::system_or_bail('pg_basebackup', '-D', $backup_path, '-p', $port,
		'-x');
	print "# Backup finished\n";
}

=item $node->backup_fs_hot(backup_name)

Create a backup with a filesystem level copy in subdirectory B<backup_name> of
B<< $node->backup_dir >>, including transaction logs.

Archiving must be enabled, as B<pg_start_backup()> and B<pg_stop_backup()> are
used. This is not checked or enforced.

The backup name is passed as the backup label to B<pg_start_backup()>.

=cut

sub backup_fs_hot
{
	my ($self, $backup_name) = @_;
	$self->_backup_fs($backup_name, 1);
}

=item $node->backup_fs_cold(backup_name)

Create a backup with a filesystem level copy in subdirectory B<backup_name> of
B<< $node->backup_dir >>, including transaction logs. The server must be
stopped as no attempt to handle concurrent writes is made.

Use B<backup> or B<backup_fs_hot> if you want to back up a running server.

=cut

sub backup_fs_cold
{
	my ($self, $backup_name) = @_;
	$self->_backup_fs($backup_name, 0);
}


# Common sub of backup_fs_hot and backup_fs_cold
sub _backup_fs
{
	my ($self, $backup_name, $hot) = @_;
	my $backup_path = $self->backup_dir . '/' . $backup_name;
	my $port        = $self->port;
	my $name        = $self->name;

	print "# Taking filesystem backup $backup_name from node \"$name\"\n";

	if ($hot)
	{
		my $stdout = $self->safe_psql('postgres',
			"SELECT * FROM pg_start_backup('$backup_name');");
		print "# pg_start_backup: $stdout\n";
	}

	RecursiveCopy::copypath(
		$self->data_dir,
		$backup_path,
		filterfn => sub {
			my $src = shift;
			return ($src ne 'pg_log' and $src ne 'postmaster.pid');
		});

	if ($hot)
	{

		# We ignore pg_stop_backup's return value. We also assume archiving
		# is enabled; otherwise the caller will have to copy the remaining
		# segments.
		my $stdout =
		  $self->safe_psql('postgres', 'SELECT * FROM pg_stop_backup();');
		print "# pg_stop_backup: $stdout\n";
	}

	print "# Backup finished\n";
}



=pod

=item $node->init_from_backup(root_node, backup_name)

Initialize a node from a backup, which may come from this node or a different
node. root_node must be a PostgresNode reference, backup_name the string name
of a backup previously created on that node with $node->backup.

Does not start the node after initializing it.

A recovery.conf is not created.

pg_hba.conf is configured to allow replication connections. Pass the keyword
parameter hba_permit_replication => 0 to disable this.

Streaming replication can be enabled on this node by passing the keyword
parameter has_streaming => 1. This is disabled by default.

Restoring WAL segments from archives using restore_command can be enabled
by passing the keyword parameter has_restoring => 1. This is disabled by
default.

The backup is copied, leaving the original unmodified. pg_hba.conf is
unconditionally set to enable replication connections.

=cut

sub init_from_backup
{
	my ($self, $root_node, $backup_name, %params) = @_;
	my $backup_path = $root_node->backup_dir . '/' . $backup_name;
	my $port        = $self->port;
	my $node_name   = $self->name;
	my $root_name   = $root_node->name;

	$params{has_streaming} = 0 unless defined $params{has_streaming};
	$params{hba_permit_replication} = 1
	  unless defined $params{hba_permit_replication};
	$params{has_restoring} = 0 unless defined $params{has_restoring};

	print
"# Initializing node \"$node_name\" from backup \"$backup_name\" of node \"$root_name\"\n";
	die "Backup \"$backup_name\" does not exist at $backup_path"
	  unless -d $backup_path;

	mkdir $self->backup_dir;
	mkdir $self->archive_dir;

	my $data_path = $self->data_dir;
	rmdir($data_path);
	RecursiveCopy::copypath($backup_path, $data_path);
	chmod(0700, $data_path);

	# Base configuration for this node
	$self->append_conf(
		'postgresql.conf',
		qq(
port = $port
));
	$self->set_replication_conf         if $params{hba_permit_replication};
	$self->enable_streaming($root_node) if $params{has_streaming};
	$self->enable_restoring($root_node) if $params{has_restoring};
}

=pod

=item $node->start()

Wrapper for pg_ctl -w start

Start the node and wait until it is ready to accept connections.

=cut

sub start
{
	my ($self) = @_;
	my $port   = $self->port;
	my $pgdata = $self->data_dir;
	my $name   = $self->name;
	BAIL_OUT("node \"$name\" is already running") if defined $self->{_pid};
	print("### Starting node \"$name\"\n");
	my $ret = TestLib::system_log('pg_ctl', '-w', '-D', $self->data_dir, '-l',
		$self->logfile, 'start');

	if ($ret != 0)
	{
		print "# pg_ctl start failed; logfile:\n";
		print TestLib::slurp_file($self->logfile);
		BAIL_OUT("pg_ctl start failed");
	}

	$self->_update_pid(1);
}

=pod

=item $node->stop(mode)

Stop the node using pg_ctl -m $mode and wait for it to stop.

Note: if the node is already known stopped, this does nothing.
However, if we think it's running and it's not, it's important for
this to fail.  Otherwise, tests might fail to detect server crashes.

=cut

sub stop
{
	my ($self, $mode) = @_;
	my $port   = $self->port;
	my $pgdata = $self->data_dir;
	my $name   = $self->name;
	$mode = 'fast' unless defined $mode;
	return unless defined $self->{_pid};
	print "### Stopping node \"$name\" using mode $mode\n";
	TestLib::system_or_bail('pg_ctl', '-D', $pgdata, '-m', $mode, 'stop');
	$self->_update_pid(0);
}

=pod

=item $node->reload()

Reload configuration parameters on the node.

=cut

sub reload
{
	my ($self) = @_;
	my $port   = $self->port;
	my $pgdata = $self->data_dir;
	my $name   = $self->name;
	print "### Reloading node \"$name\"\n";
	TestLib::system_or_bail('pg_ctl', '-D', $pgdata, 'reload');
}

=pod

=item $node->restart()

Wrapper for pg_ctl -w restart

=cut

sub restart
{
	my ($self)  = @_;
	my $port    = $self->port;
	my $pgdata  = $self->data_dir;
	my $logfile = $self->logfile;
	my $name    = $self->name;
	print "### Restarting node \"$name\"\n";
	TestLib::system_or_bail('pg_ctl', '-D', $pgdata, '-w', '-l', $logfile,
							'restart');
	$self->_update_pid(1);
}

=pod

=item $node->promote()

Wrapper for pg_ctl promote

=cut

sub promote
{
	my ($self)  = @_;
	my $port    = $self->port;
	my $pgdata  = $self->data_dir;
	my $logfile = $self->logfile;
	my $name    = $self->name;
	print "### Promoting node \"$name\"\n";
	TestLib::system_or_bail('pg_ctl', '-D', $pgdata, '-l', $logfile,
							'promote');
}

# Internal routine to enable streaming replication on a standby node.
sub enable_streaming
{
	my ($self, $root_node) = @_;
	my $root_connstr = $root_node->connstr;
	my $name         = $self->name;

	print "### Enabling streaming replication for node \"$name\"\n";
	$self->append_conf(
		'recovery.conf', qq(
primary_conninfo='$root_connstr application_name=$name'
standby_mode=on
));
}

# Internal routine to enable archive recovery command on a standby node
sub enable_restoring
{
	my ($self, $root_node) = @_;
	my $path = $vfs_path . $root_node->archive_dir;
	my $name = $self->name;

	print "### Enabling WAL restore for node \"$name\"\n";

	# On Windows, the path specified in the restore command needs to use
	# double back-slashes to work properly and to be able to detect properly
	# the file targeted by the copy command, so the directory value used
	# in this routine, using only one back-slash, need to be properly changed
	# first. Paths also need to be double-quoted to prevent failures where
	# the path contains spaces.
	$path =~ s{\\}{\\\\}g if ($TestLib::windows_os);
	my $copy_command =
	  $TestLib::windows_os
	  ? qq{copy "$path\\\\%f" "%p"}
	  : qq{cp "$path/%f" "%p"};

	$self->append_conf(
		'recovery.conf', qq(
restore_command = '$copy_command'
standby_mode = on
));
}

# Internal routine to enable archiving
sub enable_archiving
{
	my ($self) = @_;
	my $path   = $vfs_path. $self->archive_dir;
	my $name   = $self->name;

	print "### Enabling WAL archiving for node \"$name\"\n";

	# On Windows, the path specified in the restore command needs to use
	# double back-slashes to work properly and to be able to detect properly
	# the file targeted by the copy command, so the directory value used
	# in this routine, using only one back-slash, need to be properly changed
	# first. Paths also need to be double-quoted to prevent failures where
	# the path contains spaces.
	$path =~ s{\\}{\\\\}g if ($TestLib::windows_os);
	my $copy_command =
	  $TestLib::windows_os
	  ? qq{copy "%p" "$path\\\\%f"}
	  : qq{cp "%p" "$path/%f"};

	# Enable archive_mode and archive_command on node
	$self->append_conf(
		'postgresql.conf', qq(
archive_mode = on
archive_command = '$copy_command'
));
}

# Internal method
sub _update_pid
{
	my ($self, $is_running) = @_;
	my $name = $self->name;

	# If we can open the PID file, read its first line and that's the PID we
	# want.
	if (open my $pidfile, '<', $self->data_dir . "/postmaster.pid")
	{
		chomp($self->{_pid} = <$pidfile>);
		print "# Postmaster PID for node \"$name\" is $self->{_pid}\n";
		close $pidfile;

		# If we found a pidfile when there shouldn't be one, complain.
		BAIL_OUT("postmaster.pid unexpectedly present") unless $is_running;
		return;
	}

	$self->{_pid} = undef;
	print "# No postmaster PID for node \"$name\"\n";
	# Complain if we expected to find a pidfile.
	BAIL_OUT("postmaster.pid unexpectedly not present") if $is_running;
}

=pod

=item PostgresNode->get_new_node(node_name)

Build a new object of class C<PostgresNode> (or of a subclass, if you have
one), assigning a free port number.  Remembers the node, to prevent its port
number from being reused for another node, and to ensure that it gets
shut down when the test script exits.

You should generally use this instead of C<PostgresNode::new(...)>.

For backwards compatibility, it is also exported as a standalone function,
which can only create objects of class C<PostgresNode>.

=cut

sub get_new_node
{
	my $class = 'PostgresNode';
	$class = shift if 1 < scalar @_;
	my $name  = shift;
	my $found = 0;
	my $port  = $last_port_assigned;

	while ($found == 0)
	{

		# advance $port, wrapping correctly around range end
		$port = 49152 if ++$port >= 65536;
		print "# Checking port $port\n";

		# Check first that candidate port number is not included in
		# the list of already-registered nodes.
		$found = 1;
		foreach my $node (@all_nodes)
		{
			$found = 0 if ($node->port == $port);
		}

		# Check to see if anything else is listening on this TCP port.
		# This is *necessary* on Windows, and seems like a good idea
		# on Unixen as well, even though we don't ask the postmaster
		# to open a TCP port on Unix.
		if ($found == 1)
		{
			my $iaddr = inet_aton($test_localhost);
			my $paddr = sockaddr_in($port, $iaddr);
			my $proto = getprotobyname("tcp");

			socket(SOCK, PF_INET, SOCK_STREAM, $proto)
			  or die "socket failed: $!";

			# As in postmaster, don't use SO_REUSEADDR on Windows
			setsockopt(SOCK, SOL_SOCKET, SO_REUSEADDR, pack("l", 1))
			  unless $TestLib::windows_os;
			(bind(SOCK, $paddr) && listen(SOCK, SOMAXCONN))
			  or $found = 0;
			close(SOCK);
		}
	}

	print "# Found free port $port\n";

	# Lock port number found by creating a new node
	my $node = $class->new($name, $test_pghost, $port);

	# Add node to list of nodes
	push(@all_nodes, $node);

	# And update port for next time
	$last_port_assigned = $port;

	return $node;
}

# Automatically shut down any still-running nodes when the test script exits.
# Note that this just stops the postmasters (in the same order the nodes were
# created in).  Temporary PGDATA directories are deleted, in an unspecified
# order, later when the File::Temp objects are destroyed.
END
{

	# take care not to change the script's exit value
	my $exit_code = $?;

	foreach my $node (@all_nodes)
	{
		$node->teardown_node;
	}

	$? = $exit_code;
}

=pod

=item $node->teardown_node()

Do an immediate stop of the node

=cut

sub teardown_node
{
	my $self = shift;

	$self->stop('immediate');
}

=pod

=item $node->safe_psql($dbname, $sql) => stdout

Invoke B<psql> to run B<sql> on B<dbname> and return its stdout on success.
Die if the SQL produces an error. Runs with B<ON_ERROR_STOP> set.

Takes optional extra params like timeout and timed_out parameters with the same
options as psql.

=cut

sub safe_psql
{
	my ($self, $dbname, $sql, %params) = @_;

	my ($stdout, $stderr);

	my $ret = $self->psql(
		$dbname, $sql,
		%params,
		stdout        => \$stdout,
		stderr        => \$stderr,
		on_error_die  => 1,
		on_error_stop => 1);

	# psql can emit stderr from NOTICEs etc
	if ($stderr ne "")
	{
		print "#### Begin standard error\n";
		print $stderr;
		print "\n#### End standard error\n";
	}

	$stdout =~ s/\r//g if $TestLib::windows_os;
	return $stdout;
}

=pod

=item $node->psql($dbname, $sql, %params) => psql_retval

Invoke B<psql> to execute B<$sql> on B<$dbname> and return the return value
from B<psql>, which is run with on_error_stop by default so that it will
stop running sql and return 3 if the passed SQL results in an error.

As a convenience, if B<psql> is called in array context it returns an
array containing ($retval, $stdout, $stderr).

psql is invoked in tuples-only unaligned mode with reading of B<.psqlrc>
disabled.  That may be overridden by passing extra psql parameters.

stdout and stderr are transformed to UNIX line endings if on Windows. Any
trailing newline is removed.

Dies on failure to invoke psql but not if psql exits with a nonzero
return code (unless on_error_die specified).

If psql exits because of a signal, an exception is raised.

=over

=item stdout => \$stdout

B<stdout>, if given, must be a scalar reference to which standard output is
written.  If not given, standard output is not redirected and will be printed
unless B<psql> is called in array context, in which case it's captured and
returned.

=item stderr => \$stderr

Same as B<stdout> but gets standard error. If the same scalar is passed for
both B<stdout> and B<stderr> the results may be interleaved unpredictably.

=item on_error_stop => 1

By default, the B<psql> method invokes the B<psql> program with ON_ERROR_STOP=1
set, so SQL execution is stopped at the first error and exit code 2 is
returned.  Set B<on_error_stop> to 0 to ignore errors instead.

=item on_error_die => 0

By default, this method returns psql's result code. Pass on_error_die to
instead die with an informative message.

=item timeout => 'interval'

Set a timeout for the psql call as an interval accepted by B<IPC::Run::timer>
(integer seconds is fine).  This method raises an exception on timeout, unless
the B<timed_out> parameter is also given.

=item timed_out => \$timed_out

If B<timeout> is set and this parameter is given, the scalar it references
is set to true if the psql call times out.

=item extra_params => ['--single-transaction']

If given, it must be an array reference containing additional parameters to B<psql>.

=back

e.g.

	my ($stdout, $stderr, $timed_out);
	my $cmdret = $node->psql('postgres', 'SELECT pg_sleep(60)',
		stdout => \$stdout, stderr => \$stderr,
		timeout => 30, timed_out => \$timed_out,
		extra_params => ['--single-transaction'])

will set $cmdret to undef and $timed_out to a true value.

	$node->psql('postgres', $sql, on_error_die => 1);

dies with an informative message if $sql fails.

=cut

sub psql
{
	my ($self, $dbname, $sql, %params) = @_;

	my $stdout            = $params{stdout};
	my $stderr            = $params{stderr};
	my $timeout           = undef;
	my $timeout_exception = 'psql timed out';
	my @psql_params =
	  ('psql', '-XAtq', '-d', $self->connstr($dbname), '-f', '-');

	# If the caller wants an array and hasn't passed stdout/stderr
	# references, allocate temporary ones to capture them so we
	# can return them. Otherwise we won't redirect them at all.
	if (wantarray)
	{
		if (!defined($stdout))
		{
			my $temp_stdout = "";
			$stdout = \$temp_stdout;
		}
		if (!defined($stderr))
		{
			my $temp_stderr = "";
			$stderr = \$temp_stderr;
		}
	}

	$params{on_error_stop} = 1 unless defined $params{on_error_stop};
	$params{on_error_die}  = 0 unless defined $params{on_error_die};

	push @psql_params, '-v', 'ON_ERROR_STOP=1' if $params{on_error_stop};
	push @psql_params, @{ $params{extra_params} }
	  if defined $params{extra_params};

	$timeout =
	  IPC::Run::timeout($params{timeout}, exception => $timeout_exception)
	  if (defined($params{timeout}));

	${ $params{timed_out} } = 0 if defined $params{timed_out};

	# IPC::Run would otherwise append to existing contents:
	$$stdout = "" if ref($stdout);
	$$stderr = "" if ref($stderr);

	my $ret;

   # Run psql and capture any possible exceptions.  If the exception is
   # because of a timeout and the caller requested to handle that, just return
   # and set the flag.  Otherwise, and for any other exception, rethrow.
   #
   # For background, see
   # http://search.cpan.org/~ether/Try-Tiny-0.24/lib/Try/Tiny.pm
	do
	{
		local $@;
		eval {
			my @ipcrun_opts = (\@psql_params, '<', \$sql);
			push @ipcrun_opts, '>',  $stdout if defined $stdout;
			push @ipcrun_opts, '2>', $stderr if defined $stderr;
			push @ipcrun_opts, $timeout if defined $timeout;

			IPC::Run::run @ipcrun_opts;
			$ret = $?;
		};
		my $exc_save = $@;
		if ($exc_save)
		{

			# IPC::Run::run threw an exception. re-throw unless it's a
			# timeout, which we'll handle by testing is_expired
			die $exc_save
			  if (blessed($exc_save) || $exc_save !~ /^\Q$timeout_exception\E/);

			$ret = undef;

			die "Got timeout exception '$exc_save' but timer not expired?!"
			  unless $timeout->is_expired;

			if (defined($params{timed_out}))
			{
				${ $params{timed_out} } = 1;
			}
			else
			{
				die "psql timed out: stderr: '$$stderr'\n"
				  . "while running '@psql_params'";
			}
		}
	};

	if (defined $$stdout)
	{
		chomp $$stdout;
		$$stdout =~ s/\r//g if $TestLib::windows_os;
	}

	if (defined $$stderr)
	{
		chomp $$stderr;
		$$stderr =~ s/\r//g if $TestLib::windows_os;
	}

	# See http://perldoc.perl.org/perlvar.html#%24CHILD_ERROR
	# We don't use IPC::Run::Simple to limit dependencies.
	#
	# We always die on signal.
	my $core = $ret & 128 ? " (core dumped)" : "";
	die "psql exited with signal "
	  . ($ret & 127)
	  . "$core: '$$stderr' while running '@psql_params'"
	  if $ret & 127;
	$ret = $ret >> 8;

	if ($ret && $params{on_error_die})
	{
		die "psql error: stderr: '$$stderr'\nwhile running '@psql_params'"
		  if $ret == 1;
		die "connection error: '$$stderr'\nwhile running '@psql_params'"
		  if $ret == 2;
		die "error running SQL: '$$stderr'\nwhile running '@psql_params'"
		  if $ret == 3;
		die "psql returns $ret: '$$stderr'\nwhile running '@psql_params'";
	}

	if (wantarray)
	{
		return ($ret, $$stdout, $$stderr);
	}
	else
	{
		return $ret;
	}
}

=pod

=item $node->poll_query_until(dbname, query)

Run a query once a second, until it returns 't' (i.e. SQL boolean true).
Continues polling if psql returns an error result. Times out after 180 seconds.

=cut

sub poll_query_until
{
	my ($self, $dbname, $query) = @_;

	my $max_attempts = 180;
	my $attempts     = 0;
	my ($stdout, $stderr);

	while ($attempts < $max_attempts)
	{
		my $cmd =
		  [ 'psql', '-XAt', '-c', $query, '-d', $self->connstr($dbname) ];
		my $result = IPC::Run::run $cmd, '>', \$stdout, '2>', \$stderr;

		chomp($stdout);
		$stdout =~ s/\r//g if $TestLib::windows_os;
		if ($stdout eq "t")
		{
			return 1;
		}

		# Wait a second before retrying.
		sleep 1;
		$attempts++;
	}

	# The query result didn't change in 180 seconds. Give up. Print the stderr
	# from the last attempt, hopefully that's useful for debugging.
	diag $stderr;
	return 0;
}

=pod

=item $node->command_ok(...)

Runs a shell command like TestLib::command_ok, but with PGPORT
set so that the command will default to connecting to this
PostgresNode.

=cut

sub command_ok
{
	my $self = shift;

	local $ENV{PGPORT} = $self->port;

	TestLib::command_ok(@_);
}

=pod

=item $node->command_fails(...) - TestLib::command_fails with our PGPORT

See command_ok(...)

=cut

sub command_fails
{
	my $self = shift;

	local $ENV{PGPORT} = $self->port;

	TestLib::command_fails(@_);
}

=pod

=item $node->command_like(...)

TestLib::command_like with our PGPORT. See command_ok(...)

=cut

sub command_like
{
	my $self = shift;

	local $ENV{PGPORT} = $self->port;

	TestLib::command_like(@_);
}

=pod

=item $node->issues_sql_like(cmd, expected_sql, test_name)

Run a command on the node, then verify that $expected_sql appears in the
server log file.

Reads the whole log file so be careful when working with large log outputs.
The log file is truncated prior to running the command, however.

=cut

sub issues_sql_like
{
	my ($self, $cmd, $expected_sql, $test_name) = @_;

	local $ENV{PGPORT} = $self->port;

	truncate $self->logfile, 0;
	my $result = TestLib::run_log($cmd);
	ok($result, "@$cmd exit code 0");
	my $log = TestLib::slurp_file($self->logfile);
	like($log, $expected_sql, "$test_name: SQL found in server log");
}

=pod

=back

=cut

1;
