E.18. Release 9.4.13

E.18.1. Migration to Version 9.4.13

A dump/restore is not required for those running 9.4.X.

However, if you use foreign data servers that make use of user passwords for authentication, see the first changelog entry below.

Also, if you are upgrading from a version earlier than 9.4.12, see Section E.19.

E.18.2. Changes

• Further restrict visibility of pg_user_mappings.umoptions, to protect passwords stored as user mapping options (Noah Misch)

  The fix for CVE-2017-7486 was incorrect: it allowed a user to see the options in her own user mapping, even if she did not have USAGE permission on the associated foreign server. Such options might include a password that had been provided by the server owner rather than the user herself. Since information_schema.user_mapping_options does not show the options in such cases, pg_user_mappings should not either. (CVE-2017-7547)

  By itself, this patch will only fix the behavior in newly initdb'd databases. If you wish to apply this change in an existing database, you will need to do the following:

  1. Restart the postmaster after adding allow_system_table_mods = true to postgresql.conf. (In versions supporting ALTER SYSTEM, you can use that to make the configuration change, but you'll still need a restart.)

  2. In each database of the cluster, run the following commands as superuser:

     SET search_path = pg_catalog;
     CREATE OR REPLACE VIEW pg_user_mappings AS
         SELECT
             U.oid       AS umid,
             S.oid       AS srvid,
             S.srvname   AS srvname,
             U.umuser    AS umuser,
             CASE WHEN U.umuser = 0 THEN
                 'public'
             ELSE
                 A.rolname
             END AS usename,
             CASE WHEN (U.umuser <> 0 AND A.rolname = current_user
                          AND (pg_has_role(S.srvowner, 'USAGE')
                               OR has_server_privilege(S.oid, 'USAGE')))
                         OR (U.umuser = 0 AND pg_has_role(S.srvowner, 'USAGE'))
                         OR (SELECT rolsuper FROM pg_authid WHERE rolname = current_user)
                         THEN U.umoptions
                      ELSE NULL END AS umoptions
         FROM pg_user_mapping U
              LEFT JOIN pg_authid A ON (A.oid = U.umuser) JOIN
             pg_foreign_server S ON (U.umserver = S.oid);

  3. Do not forget to include the template0 and template1 databases, or the vulnerability will still exist in databases you create later. To fix template0, you'll need to temporarily make it accept connections. In PostgreSQL 9.5 and later, you can use

     ALTER DATABASE template0 WITH ALLOW_CONNECTIONS true;

     and then after fixing template0, undo that with

     ALTER DATABASE template0 WITH ALLOW_CONNECTIONS false;

     In prior versions, instead use

     UPDATE pg_database SET datallowconn = true WHERE datname = 'template0';
     UPDATE pg_database SET datallowconn = false WHERE datname = 'template0';

  4. Finally, remove the allow_system_table_mods configuration setting, and again restart the postmaster.

• Disallow empty passwords in all password-based authentication methods (Heikki Linnakangas)

  libpq ignores empty password specifications, and does not transmit them to the server. So, if a user's password has been set to the empty string, it's impossible to log in with that password via psql or other libpq-based clients. An administrator might therefore believe that setting the password to empty is equivalent to disabling password login. However, with a modified or non-libpq-based client, logging in could be possible, depending on which authentication method is configured. In particular the most common method, md5, accepted empty passwords. Change the server to reject empty passwords in all cases. (CVE-2017-7546)

• Make lo_put() check for UPDATE privilege on the target large object (Tom Lane, Michael Paquier)

  lo_put() should surely require the same permissions as lowrite(), but the check was missing, allowing any user to change the data in a large object. (CVE-2017-7548)

• Fix concurrent locking of tuple update chains (Álvaro Herrera)

  If several sessions concurrently lock a tuple update chain with nonconflicting lock modes using an old snapshot, and they all succeed, it was possible for some of them to nonetheless fail (and conclude there is no live tuple version) due to a race condition. This had consequences such as foreign-key checks failing to see a tuple that definitely exists but is being updated concurrently.

• Fix potential data corruption when freezing a tuple whose XMAX is a multixact with exactly one still-interesting member (Teodor Sigaev)

• Avoid integer overflow and ensuing crash when sorting more than one billion tuples in-memory (Sergey Koposov)

• On Windows, retry process creation if we fail to reserve the address range for our shared memory in the new process (Tom Lane, Amit Kapila)

  This is expected to fix infrequent child-process-launch failures that are probably due to interference from antivirus products.

• Fix low-probability corruption of shared predicate-lock hash table in Windows builds (Thomas Munro, Tom Lane)

• Avoid logging clean closure of an SSL connection as though it were a connection reset (Michael Paquier)

• Prevent sending SSL session tickets to clients (Tom Lane)

  This fix prevents reconnection failures with ticket-aware client-side SSL code.

• Fix code for setting tcp_keepalives_idle on Solaris (Tom Lane)

• Fix statistics collector to honor inquiry messages issued just after a postmaster shutdown and immediate restart (Tom Lane)

  Statistics inquiries issued within half a second of the previous postmaster shutdown were effectively ignored.

• Ensure that the statistics collector's receive buffer size is at least 100KB (Tom Lane)

  This reduces the risk of dropped statistics data on older platforms whose default receive buffer size is less than that.

• Fix possible creation of an invalid WAL segment when a standby is promoted just after it processes an XLOG_SWITCH WAL record (Andres Freund)

• Fix walsender to exit promptly when client requests shutdown (Tom Lane)

• Fix SIGHUP and SIGUSR1 handling in walsender processes (Petr Jelinek, Andres Freund)

• Prevent walsender-triggered panics during shutdown checkpoints (Andres Freund, Michael Paquier)

• Fix unnecessarily slow restarts of walreceiver processes due to race condition in postmaster (Tom Lane)

• Fix logical decoding failure with very wide tuples (Andres Freund)

  Logical decoding crashed on tuples that are wider than 64KB (after compression, but with all data in-line). The case arises only when REPLICA IDENTITY FULL is enabled for a table containing such tuples.

• Fix leakage of small subtransactions spilled to disk during logical decoding (Andres Freund)

  This resulted in temporary files consuming excessive disk space.

• Reduce the work needed to build snapshots during creation of logical-decoding slots (Andres Freund, Petr Jelinek)

  The previous algorithm was infeasibly expensive on a server with a lot of open transactions.

• Fix race condition that could indefinitely delay creation of logical-decoding slots (Andres Freund, Petr Jelinek)

• Reduce overhead in processing syscache invalidation events (Tom Lane)

  This is particularly helpful for logical decoding, which triggers frequent cache invalidation.

• Fix cases where an INSERT or UPDATE assigns to more than one element of a column that is of domain-over-array type (Tom Lane)

• Allow window functions to be used in sub-SELECTs that are within the arguments of an aggregate function (Tom Lane)

• Move autogenerated array types out of the way during ALTER ... RENAME (Vik Fearing)

  Previously, we would rename a conflicting autogenerated array type out of the way during CREATE; this fix extends that behavior to renaming operations.

• Ensure that ALTER USER ... SET accepts all the syntax variants that ALTER ROLE ... SET does (Peter Eisentraut)

• Properly update dependency info when changing a datatype I/O function's argument or return type from opaque to the correct type (Heikki Linnakangas)

  CREATE TYPE updates I/O functions declared in this long-obsolete style, but it forgot to record a dependency on the type, allowing a subsequent DROP TYPE to leave broken function definitions behind.

• Reduce memory usage when ANALYZE processes a tsvector column (Heikki Linnakangas)

• Fix unnecessary precision loss and sloppy rounding when multiplying or dividing money values by integers or floats (Tom Lane)

• Tighten checks for whitespace in functions that parse identifiers, such as regprocedurein() (Tom Lane)

  Depending on the prevailing locale, these functions could misinterpret fragments of multibyte characters as whitespace.

• Use relevant #define symbols from Perl while compiling PL/Perl (Ashutosh Sharma, Tom Lane)

  This avoids portability problems, typically manifesting as a "handshake" mismatch during library load, when working with recent Perl versions.

• In libpq, reset GSS/SASL and SSPI authentication state properly after a failed connection attempt (Michael Paquier)

  Failure to do this meant that when falling back from SSL to non-SSL connections, a GSS/SASL failure in the SSL attempt would always cause the non-SSL attempt to fail. SSPI did not fail, but it leaked memory.

• In psql, fix failure when COPY FROM STDIN is ended with a keyboard EOF signal and then another COPY FROM STDIN is attempted (Thomas Munro)

  This misbehavior was observed on BSD-derived platforms (including macOS), but not on most others.

• Fix pg_dump and pg_restore to emit REFRESH MATERIALIZED VIEW commands last (Tom Lane)

  This prevents errors during dump/restore when a materialized view refers to tables owned by a different user.

• Improve pg_dump/pg_restore's reporting of error conditions originating in zlib (Vladimir Kunschikov, Álvaro Herrera)

• Fix pg_dump with the --clean option to drop event triggers as expected (Tom Lane)

  It also now correctly assigns ownership of event triggers; before, they were restored as being owned by the superuser running the restore script.

• Fix pg_dump to not emit invalid SQL for an empty operator class (Daniel Gustafsson)

• Fix pg_dump output to stdout on Windows (Kuntal Ghosh)

  A compressed plain-text dump written to stdout would contain corrupt data due to failure to put the file descriptor into binary mode.

• Fix pg_get_ruledef() to print correct output for the ON SELECT rule of a view whose columns have been renamed (Tom Lane)

  In some corner cases, pg_dump relies on pg_get_ruledef() to dump views, so that this error could result in dump/reload failures.

• Fix dumping of outer joins with empty constraints, such as the result of a NATURAL LEFT JOIN with no common columns (Tom Lane)

• Fix dumping of function expressions in the FROM clause in cases where the expression does not deparse into something that looks like a function call (Tom Lane)

• Fix pg_basebackup output to stdout on Windows (Haribabu Kommi)

  A backup written to stdout would contain corrupt data due to failure to put the file descriptor into binary mode.

• Fix pg_upgrade to ensure that the ending WAL record does not have wal_level = minimum (Bruce Momjian)

  This condition could prevent upgraded standby servers from reconnecting.

• In postgres_fdw, re-establish connections to remote servers after ALTER SERVER or ALTER USER MAPPING commands (Kyotaro Horiguchi)

  This ensures that option changes affecting connection parameters will be applied promptly.

• In postgres_fdw, allow cancellation of remote transaction control commands (Robert Haas, Rafia Sabih)

  This change allows us to quickly escape a wait for an unresponsive remote server in many more cases than previously.

• Increase MAX_SYSCACHE_CALLBACKS to provide more room for extensions (Tom Lane)

• Always use -fPIC, not -fpic, when building shared libraries with gcc (Tom Lane)

  This supports larger extension libraries on platforms where it makes a difference.

• Fix unescaped-braces issue in our build scripts for Microsoft MSVC, to avoid a warning or error from recent Perl versions (Andrew Dunstan)

• In MSVC builds, handle the case where the openssl library is not within a VC subdirectory (Andrew Dunstan)

• In MSVC builds, add proper include path for libxml2 header files (Andrew Dunstan)

  This fixes a former need to move things around in standard Windows installations of libxml2.

• In MSVC builds, recognize a Tcl library that is named tcl86.lib (Noah Misch)

• In MSVC builds, honor PROVE_FLAGS settings on vcregress.pl's command line (Andrew Dunstan)