| PostgreSQL 9.6.5 Documentation | |||
|---|---|---|---|
| Prev | Up | Chapter 9. Functions and Operators | Next |
Table 9-36 shows the operators available for the cidr and inet types. The operators <<, <<=, >>, >>=, and && test for subnet inclusion. They consider only the network parts of the two addresses (ignoring any host part) and determine whether one network is identical to or a subnet of the other.
Table 9-36. cidr and inet Operators
| Operator | Description | Example |
|---|---|---|
| < | is less than | inet '192.168.1.5' < inet '192.168.1.6' |
| <= | is less than or equal | inet '192.168.1.5' <= inet '192.168.1.5' |
| = | equals | inet '192.168.1.5' = inet '192.168.1.5' |
| >= | is greater or equal | inet '192.168.1.5' >= inet '192.168.1.5' |
| > | is greater than | inet '192.168.1.5' > inet '192.168.1.4' |
| <> | is not equal | inet '192.168.1.5' <> inet '192.168.1.4' |
| << | is contained by | inet '192.168.1.5' << inet '192.168.1/24' |
| <<= | is contained by or equals | inet '192.168.1/24' <<= inet '192.168.1/24' |
| >> | contains | inet '192.168.1/24' >> inet '192.168.1.5' |
| >>= | contains or equals | inet '192.168.1/24' >>= inet '192.168.1/24' |
| && | contains or is contained by | inet '192.168.1/24' && inet '192.168.1.80/28' |
| ~ | bitwise NOT | ~ inet '192.168.1.6' |
| & | bitwise AND | inet '192.168.1.6' & inet '0.0.0.255' |
| | | bitwise OR | inet '192.168.1.6' | inet '0.0.0.255' |
| + | addition | inet '192.168.1.6' + 25 |
| - | subtraction | inet '192.168.1.43' - 36 |
| - | subtraction | inet '192.168.1.43' - inet '192.168.1.19' |
Table 9-37 shows the functions
available for use with the cidr and inet
types. The abbrev, host,
and text
functions are primarily intended to offer alternative display
formats.
Table 9-37. cidr and inet Functions
| Function | Return Type | Description | Example | Result |
|---|---|---|---|---|
abbrev(inet)
| text | abbreviated display format as text | abbrev(inet '10.1.0.0/16') | 10.1.0.0/16 |
abbrev(cidr) | text | abbreviated display format as text | abbrev(cidr '10.1.0.0/16') | 10.1/16 |
broadcast(inet)
| inet | broadcast address for network | broadcast('192.168.1.5/24') | 192.168.1.255/24 |
family(inet)
| int | extract family of address; 4 for IPv4, 6 for IPv6 | family('::1') | 6 |
host(inet)
| text | extract IP address as text | host('192.168.1.5/24') | 192.168.1.5 |
hostmask(inet)
| inet | construct host mask for network | hostmask('192.168.23.20/30') | 0.0.0.3 |
masklen(inet)
| int | extract netmask length | masklen('192.168.1.5/24') | 24 |
netmask(inet)
| inet | construct netmask for network | netmask('192.168.1.5/24') | 255.255.255.0 |
network(inet)
| cidr | extract network part of address | network('192.168.1.5/24') | 192.168.1.0/24 |
set_masklen(inet, int)
| inet | set netmask length for inet value | set_masklen('192.168.1.5/24', 16) | 192.168.1.5/16 |
set_masklen(cidr, int) | cidr | set netmask length for cidr value | set_masklen('192.168.1.0/24'::cidr, 16) | 192.168.0.0/16 |
text(inet)
| text | extract IP address and netmask length as text | text(inet '192.168.1.5') | 192.168.1.5/32 |
inet_same_family(inet, inet)
| boolean | are the addresses from the same family? | inet_same_family('192.168.1.5/24', '::1') | false |
inet_merge(inet, inet)
| cidr | the smallest network which includes both of the given networks | inet_merge('192.168.1.5/24', '192.168.2.5/24') | 192.168.0.0/22 |
Any cidr value can be cast to inet implicitly or explicitly; therefore, the functions shown above as operating on inet also work on cidr values. (Where there are separate functions for inet and cidr, it is because the behavior should be different for the two cases.) Also, it is permitted to cast an inet value to cidr. When this is done, any bits to the right of the netmask are silently zeroed to create a valid cidr value. In addition, you can cast a text value to inet or cidr using normal casting syntax: for example, inet(expression) or colname::cidr.
Table 9-38 shows the functions
available for use with the macaddr type. The function
trunc(macaddr) returns a MAC
address with the last 3 bytes set to zero. This can be used to
associate the remaining prefix with a manufacturer.
Table 9-38. macaddr Functions
| Function | Return Type | Description | Example | Result |
|---|---|---|---|---|
trunc(macaddr)
| macaddr | set last 3 bytes to zero | trunc(macaddr '12:34:56:78:90:ab') | 12:34:56:00:00:00 |
The macaddr type also supports the standard relational operators (>, <=, etc.) for lexicographical ordering, and the bitwise arithmetic operators (~, & and |) for NOT, AND and OR.