# Makefile.in generated by automake 1.15.1 from Makefile.am.
# @configure_input@

# Copyright (C) 1994-2017 Free Software Foundation, Inc.

# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@



VPATH = @srcdir@
am__is_gnu_make = { \
  if test -z '$(MAKELEVEL)'; then \
    false; \
  elif test -n '$(MAKE_HOST)'; then \
    true; \
  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
    true; \
  else \
    false; \
  fi; \
}
am__make_running_with_option = \
  case $${target_option-} in \
      ?) ;; \
      *) echo "am__make_running_with_option: internal error: invalid" \
              "target option '$${target_option-}' specified" >&2; \
         exit 1;; \
  esac; \
  has_opt=no; \
  sane_makeflags=$$MAKEFLAGS; \
  if $(am__is_gnu_make); then \
    sane_makeflags=$$MFLAGS; \
  else \
    case $$MAKEFLAGS in \
      *\\[\ \	]*) \
        bs=\\; \
        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
    esac; \
  fi; \
  skip_next=no; \
  strip_trailopt () \
  { \
    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
  }; \
  for flg in $$sane_makeflags; do \
    test $$skip_next = yes && { skip_next=no; continue; }; \
    case $$flg in \
      *=*|--*) continue;; \
        -*I) strip_trailopt 'I'; skip_next=yes;; \
      -*I?*) strip_trailopt 'I';; \
        -*O) strip_trailopt 'O'; skip_next=yes;; \
      -*O?*) strip_trailopt 'O';; \
        -*l) strip_trailopt 'l'; skip_next=yes;; \
      -*l?*) strip_trailopt 'l';; \
      -[dEDm]) skip_next=yes;; \
      -[JT]) skip_next=yes;; \
    esac; \
    case $$flg in \
      *$$target_option*) has_opt=yes; break;; \
    esac; \
  done; \
  test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
@DBUS_WITH_GLIB_TRUE@am__append_1 = \
@DBUS_WITH_GLIB_TRUE@	test-utils-glib.c \
@DBUS_WITH_GLIB_TRUE@	test-utils-glib.h \
@DBUS_WITH_GLIB_TRUE@	$(NULL)

TESTS = $(am__append_3) $(am__EXEEXT_10)
@DBUS_ENABLE_EMBEDDED_TESTS_TRUE@@DBUS_UNIX_TRUE@am__append_2 = test-bus-launch-helper.sh \
@DBUS_ENABLE_EMBEDDED_TESTS_TRUE@@DBUS_UNIX_TRUE@	test-bus-system.sh
@DBUS_ENABLE_EMBEDDED_TESTS_TRUE@am__append_3 = $(wrap_bus_tests) $(wrap_dbus_tests)
@DBUS_ENABLE_EMBEDDED_TESTS_TRUE@am__append_4 = $(wrap_bus_tests) $(wrap_dbus_tests)
noinst_PROGRAMS = $(am__EXEEXT_1) $(am__EXEEXT_8)
testexec_PROGRAMS = $(am__EXEEXT_9)
@DBUS_WIN_TRUE@am__append_5 = manual-paths
@DBUS_WITH_GLIB_TRUE@am__append_6 = \
@DBUS_WITH_GLIB_TRUE@	test-corrupt \
@DBUS_WITH_GLIB_TRUE@	test-dbus-daemon \
@DBUS_WITH_GLIB_TRUE@	test-dbus-daemon-eavesdrop \
@DBUS_WITH_GLIB_TRUE@	test-fdpass \
@DBUS_WITH_GLIB_TRUE@	test-monitor \
@DBUS_WITH_GLIB_TRUE@	test-loopback \
@DBUS_WITH_GLIB_TRUE@	test-marshal \
@DBUS_WITH_GLIB_TRUE@	test-refs \
@DBUS_WITH_GLIB_TRUE@	test-relay \
@DBUS_WITH_GLIB_TRUE@	test-syntax \
@DBUS_WITH_GLIB_TRUE@	test-syslog \
@DBUS_WITH_GLIB_TRUE@	test-uid-permissions \
@DBUS_WITH_GLIB_TRUE@	$(NULL)

@DBUS_UNIX_TRUE@@DBUS_WITH_GLIB_TRUE@am__append_7 = \
@DBUS_UNIX_TRUE@@DBUS_WITH_GLIB_TRUE@	test-sd-activation \
@DBUS_UNIX_TRUE@@DBUS_WITH_GLIB_TRUE@	$(NULL)

@DBUS_WITH_GLIB_TRUE@am__append_8 = \
@DBUS_WITH_GLIB_TRUE@	manual-authz \
@DBUS_WITH_GLIB_TRUE@	$(NULL)

@DBUS_ENABLE_MODULAR_TESTS_TRUE@am__append_9 = $(installable_tests)
@DBUS_ENABLE_MODULAR_TESTS_TRUE@am__append_10 = $(installable_tests)
@DBUS_ENABLE_INSTALLED_TESTS_TRUE@@DBUS_ENABLE_MODULAR_TESTS_TRUE@am__append_11 = $(installable_tests) $(installable_manual_tests)
@DBUS_ENABLE_INSTALLED_TESTS_TRUE@@DBUS_ENABLE_MODULAR_TESTS_TRUE@am__append_12 = $(installable_test_meta) \
@DBUS_ENABLE_INSTALLED_TESTS_TRUE@@DBUS_ENABLE_MODULAR_TESTS_TRUE@	$(installable_test_meta_with_config)
@DBUS_ENABLE_INSTALLED_TESTS_FALSE@@DBUS_ENABLE_MODULAR_TESTS_TRUE@am__append_13 = $(installable_tests) $(installable_manual_tests)
subdir = test
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/as-ac-expand.m4 \
	$(top_srcdir)/m4/compiler.m4 \
	$(top_srcdir)/m4/ld-version-script.m4 \
	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/pkg.m4 \
	$(top_srcdir)/m4/tp-compiler-flag.m4 \
	$(top_srcdir)/m4/tp-compiler-warnings.m4 \
	$(top_srcdir)/m4/visibility.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
LTLIBRARIES = $(noinst_LTLIBRARIES)
libdbus_testutils_la_DEPENDENCIES = $(top_builddir)/dbus/libdbus-1.la \
	$(top_builddir)/dbus/libdbus-internal.la
am__libdbus_testutils_la_SOURCES_DIST = test-utils.c test-utils.h \
	test-utils-glib.c test-utils-glib.h
@DBUS_WITH_GLIB_TRUE@am__objects_1 = test-utils-glib.lo
am_libdbus_testutils_la_OBJECTS = test-utils.lo $(am__objects_1)
libdbus_testutils_la_OBJECTS = $(am_libdbus_testutils_la_OBJECTS)
AM_V_lt = $(am__v_lt_@AM_V@)
am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
am__v_lt_0 = --silent
am__v_lt_1 = 
@DBUS_ENABLE_EMBEDDED_TESTS_TRUE@am__EXEEXT_1 = test-spawn$(EXEEXT) \
@DBUS_ENABLE_EMBEDDED_TESTS_TRUE@	test-exit$(EXEEXT) \
@DBUS_ENABLE_EMBEDDED_TESTS_TRUE@	test-names$(EXEEXT) \
@DBUS_ENABLE_EMBEDDED_TESTS_TRUE@	test-segfault$(EXEEXT) \
@DBUS_ENABLE_EMBEDDED_TESTS_TRUE@	test-service$(EXEEXT) \
@DBUS_ENABLE_EMBEDDED_TESTS_TRUE@	test-shell-service$(EXEEXT) \
@DBUS_ENABLE_EMBEDDED_TESTS_TRUE@	test-sleep-forever$(EXEEXT)
@DBUS_WITH_GLIB_TRUE@am__EXEEXT_2 = test-corrupt$(EXEEXT) \
@DBUS_WITH_GLIB_TRUE@	test-dbus-daemon$(EXEEXT) \
@DBUS_WITH_GLIB_TRUE@	test-dbus-daemon-eavesdrop$(EXEEXT) \
@DBUS_WITH_GLIB_TRUE@	test-fdpass$(EXEEXT) \
@DBUS_WITH_GLIB_TRUE@	test-monitor$(EXEEXT) \
@DBUS_WITH_GLIB_TRUE@	test-loopback$(EXEEXT) \
@DBUS_WITH_GLIB_TRUE@	test-marshal$(EXEEXT) test-refs$(EXEEXT) \
@DBUS_WITH_GLIB_TRUE@	test-relay$(EXEEXT) test-syntax$(EXEEXT) \
@DBUS_WITH_GLIB_TRUE@	test-syslog$(EXEEXT) \
@DBUS_WITH_GLIB_TRUE@	test-uid-permissions$(EXEEXT)
@DBUS_UNIX_TRUE@@DBUS_WITH_GLIB_TRUE@am__EXEEXT_3 = test-sd-activation$(EXEEXT)
am__EXEEXT_4 = test-shell$(EXEEXT) test-printf$(EXEEXT) \
	$(am__EXEEXT_2) $(am__EXEEXT_3)
@DBUS_WIN_TRUE@am__EXEEXT_5 = manual-paths$(EXEEXT)
@DBUS_WITH_GLIB_TRUE@am__EXEEXT_6 = manual-authz$(EXEEXT)
am__EXEEXT_7 = manual-dir-iter$(EXEEXT) manual-tcp$(EXEEXT) \
	$(am__EXEEXT_5) $(am__EXEEXT_6)
@DBUS_ENABLE_INSTALLED_TESTS_FALSE@@DBUS_ENABLE_MODULAR_TESTS_TRUE@am__EXEEXT_8 = $(am__EXEEXT_4) \
@DBUS_ENABLE_INSTALLED_TESTS_FALSE@@DBUS_ENABLE_MODULAR_TESTS_TRUE@	$(am__EXEEXT_7)
@DBUS_ENABLE_INSTALLED_TESTS_TRUE@@DBUS_ENABLE_MODULAR_TESTS_TRUE@am__EXEEXT_9 = $(am__EXEEXT_4) \
@DBUS_ENABLE_INSTALLED_TESTS_TRUE@@DBUS_ENABLE_MODULAR_TESTS_TRUE@	$(am__EXEEXT_7)
am__installdirs = "$(DESTDIR)$(testexecdir)" \
	"$(DESTDIR)$(testmetadir)"
PROGRAMS = $(noinst_PROGRAMS) $(testexec_PROGRAMS)
am_manual_authz_OBJECTS = manual-authz.$(OBJEXT)
manual_authz_OBJECTS = $(am_manual_authz_OBJECTS)
am__DEPENDENCIES_1 =
manual_authz_DEPENDENCIES = libdbus-testutils.la $(am__DEPENDENCIES_1)
am_manual_dir_iter_OBJECTS = manual-dir-iter.$(OBJEXT)
manual_dir_iter_OBJECTS = $(am_manual_dir_iter_OBJECTS)
manual_dir_iter_DEPENDENCIES =  \
	$(top_builddir)/dbus/libdbus-internal.la
am_manual_paths_OBJECTS = manual-paths.$(OBJEXT)
manual_paths_OBJECTS = $(am_manual_paths_OBJECTS)
manual_paths_DEPENDENCIES = $(top_builddir)/dbus/libdbus-internal.la
am_manual_tcp_OBJECTS = manual-tcp.$(OBJEXT)
manual_tcp_OBJECTS = $(am_manual_tcp_OBJECTS)
manual_tcp_DEPENDENCIES = $(top_builddir)/dbus/libdbus-internal.la
am_test_corrupt_OBJECTS = corrupt.$(OBJEXT)
test_corrupt_OBJECTS = $(am_test_corrupt_OBJECTS)
test_corrupt_DEPENDENCIES = libdbus-testutils.la $(am__DEPENDENCIES_1)
am_test_dbus_daemon_OBJECTS = dbus-daemon.$(OBJEXT)
test_dbus_daemon_OBJECTS = $(am_test_dbus_daemon_OBJECTS)
test_dbus_daemon_DEPENDENCIES = libdbus-testutils.la \
	$(am__DEPENDENCIES_1)
am_test_dbus_daemon_eavesdrop_OBJECTS =  \
	dbus-daemon-eavesdrop.$(OBJEXT)
test_dbus_daemon_eavesdrop_OBJECTS =  \
	$(am_test_dbus_daemon_eavesdrop_OBJECTS)
test_dbus_daemon_eavesdrop_DEPENDENCIES = libdbus-testutils.la \
	$(am__DEPENDENCIES_1)
test_exit_SOURCES = test-exit.c
test_exit_OBJECTS = test-exit.$(OBJEXT)
test_exit_LDADD = $(LDADD)
am_test_fdpass_OBJECTS = fdpass.$(OBJEXT)
test_fdpass_OBJECTS = $(am_test_fdpass_OBJECTS)
test_fdpass_DEPENDENCIES = libdbus-testutils.la $(am__DEPENDENCIES_1)
am_test_loopback_OBJECTS = loopback.$(OBJEXT)
test_loopback_OBJECTS = $(am_test_loopback_OBJECTS)
test_loopback_DEPENDENCIES = libdbus-testutils.la \
	$(am__DEPENDENCIES_1)
am_test_marshal_OBJECTS = marshal.$(OBJEXT)
test_marshal_OBJECTS = $(am_test_marshal_OBJECTS)
test_marshal_DEPENDENCIES = libdbus-testutils.la $(am__DEPENDENCIES_1)
am_test_monitor_OBJECTS = monitor.$(OBJEXT)
test_monitor_OBJECTS = $(am_test_monitor_OBJECTS)
test_monitor_DEPENDENCIES = libdbus-testutils.la $(am__DEPENDENCIES_1)
test_names_SOURCES = test-names.c
test_names_OBJECTS = test-names.$(OBJEXT)
test_names_DEPENDENCIES = libdbus-testutils.la
am__dirstamp = $(am__leading_dot)dirstamp
am_test_printf_OBJECTS = internals/printf.$(OBJEXT)
test_printf_OBJECTS = $(am_test_printf_OBJECTS)
test_printf_DEPENDENCIES = $(top_builddir)/dbus/libdbus-internal.la
am_test_refs_OBJECTS = internals/refs.$(OBJEXT)
test_refs_OBJECTS = $(am_test_refs_OBJECTS)
test_refs_DEPENDENCIES = libdbus-testutils.la $(am__DEPENDENCIES_1)
am_test_relay_OBJECTS = relay.$(OBJEXT)
test_relay_OBJECTS = $(am_test_relay_OBJECTS)
test_relay_DEPENDENCIES = libdbus-testutils.la $(am__DEPENDENCIES_1)
am__test_sd_activation_SOURCES_DIST = sd-activation.c
@DBUS_UNIX_TRUE@am_test_sd_activation_OBJECTS =  \
@DBUS_UNIX_TRUE@	sd-activation.$(OBJEXT)
test_sd_activation_OBJECTS = $(am_test_sd_activation_OBJECTS)
@DBUS_UNIX_TRUE@test_sd_activation_DEPENDENCIES =  \
@DBUS_UNIX_TRUE@	libdbus-testutils.la $(am__DEPENDENCIES_1)
test_segfault_SOURCES = test-segfault.c
test_segfault_OBJECTS = test-segfault.$(OBJEXT)
test_segfault_LDADD = $(LDADD)
test_service_SOURCES = test-service.c
test_service_OBJECTS = test-service.$(OBJEXT)
test_service_DEPENDENCIES = libdbus-testutils.la
am_test_shell_OBJECTS = shell-test.$(OBJEXT)
test_shell_OBJECTS = $(am_test_shell_OBJECTS)
test_shell_DEPENDENCIES = libdbus-testutils.la
test_shell_service_SOURCES = test-shell-service.c
test_shell_service_OBJECTS = test-shell-service.$(OBJEXT)
test_shell_service_DEPENDENCIES = libdbus-testutils.la
test_sleep_forever_SOURCES = test-sleep-forever.c
test_sleep_forever_OBJECTS = test-sleep-forever.$(OBJEXT)
test_sleep_forever_LDADD = $(LDADD)
am_test_spawn_OBJECTS = spawn-test.$(OBJEXT)
test_spawn_OBJECTS = $(am_test_spawn_OBJECTS)
test_spawn_DEPENDENCIES = $(top_builddir)/dbus/libdbus-internal.la
am_test_syntax_OBJECTS = syntax.$(OBJEXT)
test_syntax_OBJECTS = $(am_test_syntax_OBJECTS)
test_syntax_DEPENDENCIES = libdbus-testutils.la $(am__DEPENDENCIES_1)
am_test_syslog_OBJECTS = internals/syslog.$(OBJEXT)
test_syslog_OBJECTS = $(am_test_syslog_OBJECTS)
test_syslog_DEPENDENCIES = libdbus-testutils.la $(am__DEPENDENCIES_1)
am_test_uid_permissions_OBJECTS = uid-permissions.$(OBJEXT)
test_uid_permissions_OBJECTS = $(am_test_uid_permissions_OBJECTS)
test_uid_permissions_DEPENDENCIES = libdbus-testutils.la \
	$(am__DEPENDENCIES_1)
AM_V_P = $(am__v_P_@AM_V@)
am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_@AM_V@)
am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
am__v_GEN_0 = @echo "  GEN     " $@;
am__v_GEN_1 = 
AM_V_at = $(am__v_at_@AM_V@)
am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
am__v_at_0 = @
am__v_at_1 = 
DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
depcomp = $(SHELL) $(top_srcdir)/build-aux/depcomp
am__depfiles_maybe = depfiles
am__mv = mv -f
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
	$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
	$(AM_CFLAGS) $(CFLAGS)
AM_V_CC = $(am__v_CC_@AM_V@)
am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
am__v_CC_0 = @echo "  CC      " $@;
am__v_CC_1 = 
CCLD = $(CC)
LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
	$(AM_LDFLAGS) $(LDFLAGS) -o $@
AM_V_CCLD = $(am__v_CCLD_@AM_V@)
am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
am__v_CCLD_0 = @echo "  CCLD    " $@;
am__v_CCLD_1 = 
SOURCES = $(libdbus_testutils_la_SOURCES) $(manual_authz_SOURCES) \
	$(manual_dir_iter_SOURCES) $(manual_paths_SOURCES) \
	$(manual_tcp_SOURCES) $(test_corrupt_SOURCES) \
	$(test_dbus_daemon_SOURCES) \
	$(test_dbus_daemon_eavesdrop_SOURCES) test-exit.c \
	$(test_fdpass_SOURCES) $(test_loopback_SOURCES) \
	$(test_marshal_SOURCES) $(test_monitor_SOURCES) test-names.c \
	$(test_printf_SOURCES) $(test_refs_SOURCES) \
	$(test_relay_SOURCES) $(test_sd_activation_SOURCES) \
	test-segfault.c test-service.c $(test_shell_SOURCES) \
	test-shell-service.c test-sleep-forever.c \
	$(test_spawn_SOURCES) $(test_syntax_SOURCES) \
	$(test_syslog_SOURCES) $(test_uid_permissions_SOURCES)
DIST_SOURCES = $(am__libdbus_testutils_la_SOURCES_DIST) \
	$(manual_authz_SOURCES) $(manual_dir_iter_SOURCES) \
	$(manual_paths_SOURCES) $(manual_tcp_SOURCES) \
	$(test_corrupt_SOURCES) $(test_dbus_daemon_SOURCES) \
	$(test_dbus_daemon_eavesdrop_SOURCES) test-exit.c \
	$(test_fdpass_SOURCES) $(test_loopback_SOURCES) \
	$(test_marshal_SOURCES) $(test_monitor_SOURCES) test-names.c \
	$(test_printf_SOURCES) $(test_refs_SOURCES) \
	$(test_relay_SOURCES) $(am__test_sd_activation_SOURCES_DIST) \
	test-segfault.c test-service.c $(test_shell_SOURCES) \
	test-shell-service.c test-sleep-forever.c \
	$(test_spawn_SOURCES) $(test_syntax_SOURCES) \
	$(test_syslog_SOURCES) $(test_uid_permissions_SOURCES)
RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
	ctags-recursive dvi-recursive html-recursive info-recursive \
	install-data-recursive install-dvi-recursive \
	install-exec-recursive install-html-recursive \
	install-info-recursive install-pdf-recursive \
	install-ps-recursive install-recursive installcheck-recursive \
	installdirs-recursive pdf-recursive ps-recursive \
	tags-recursive uninstall-recursive
am__can_run_installinfo = \
  case $$AM_UPDATE_INFO_DIR in \
    n|no|NO) false;; \
    *) (install-info --version) >/dev/null 2>&1;; \
  esac
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
  for p in $$list; do echo "$$p $$p"; done | \
  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
    if (++n[$$2] == $(am__install_max)) \
      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
    END { for (dir in files) print dir, files[dir] }'
am__base_list = \
  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__uninstall_files_from_dir = { \
  test -z "$$files" \
    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
         $(am__cd) "$$dir" && rm -f $$files; }; \
  }
DATA = $(noinst_DATA) $(testmeta_DATA)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
  distclean-recursive maintainer-clean-recursive
am__recursive_targets = \
  $(RECURSIVE_TARGETS) \
  $(RECURSIVE_CLEAN_TARGETS) \
  $(am__extra_recursive_targets)
AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
	check recheck distdir
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
# Read a list of newline-separated strings from the standard input,
# and print each of them once, without duplicates.  Input order is
# *not* preserved.
am__uniquify_input = $(AWK) '\
  BEGIN { nonempty = 0; } \
  { items[$$0] = 1; nonempty = 1; } \
  END { if (nonempty) { for (i in items) print i; }; } \
'
# Make sure the list of sources is unique.  This is necessary because,
# e.g., the same source file might be shared among _SOURCES variables
# for different programs/libraries.
am__define_uniq_tagged_files = \
  list='$(am__tagged_files)'; \
  unique=`for i in $$list; do \
    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
  done | $(am__uniquify_input)`
ETAGS = etags
CTAGS = ctags
am__tty_colors_dummy = \
  mgn= red= grn= lgn= blu= brg= std=; \
  am__color_tests=no
am__tty_colors = { \
  $(am__tty_colors_dummy); \
  if test "X$(AM_COLOR_TESTS)" = Xno; then \
    am__color_tests=no; \
  elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
    am__color_tests=yes; \
  elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
    am__color_tests=yes; \
  fi; \
  if test $$am__color_tests = yes; then \
    red='[0;31m'; \
    grn='[0;32m'; \
    lgn='[1;32m'; \
    blu='[1;34m'; \
    mgn='[0;35m'; \
    brg='[1m'; \
    std='[m'; \
  fi; \
}
am__recheck_rx = ^[ 	]*:recheck:[ 	]*
am__global_test_result_rx = ^[ 	]*:global-test-result:[ 	]*
am__copy_in_global_log_rx = ^[ 	]*:copy-in-global-log:[ 	]*
# A command that, given a newline-separated list of test names on the
# standard input, print the name of the tests that are to be re-run
# upon "make recheck".
am__list_recheck_tests = $(AWK) '{ \
  recheck = 1; \
  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
    { \
      if (rc < 0) \
        { \
          if ((getline line2 < ($$0 ".log")) < 0) \
	    recheck = 0; \
          break; \
        } \
      else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
        { \
          recheck = 0; \
          break; \
        } \
      else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
        { \
          break; \
        } \
    }; \
  if (recheck) \
    print $$0; \
  close ($$0 ".trs"); \
  close ($$0 ".log"); \
}'
# A command that, given a newline-separated list of test names on the
# standard input, create the global log from their .trs and .log files.
am__create_global_log = $(AWK) ' \
function fatal(msg) \
{ \
  print "fatal: making $@: " msg | "cat >&2"; \
  exit 1; \
} \
function rst_section(header) \
{ \
  print header; \
  len = length(header); \
  for (i = 1; i <= len; i = i + 1) \
    printf "="; \
  printf "\n\n"; \
} \
{ \
  copy_in_global_log = 1; \
  global_test_result = "RUN"; \
  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
    { \
      if (rc < 0) \
         fatal("failed to read from " $$0 ".trs"); \
      if (line ~ /$(am__global_test_result_rx)/) \
        { \
          sub("$(am__global_test_result_rx)", "", line); \
          sub("[ 	]*$$", "", line); \
          global_test_result = line; \
        } \
      else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
        copy_in_global_log = 0; \
    }; \
  if (copy_in_global_log) \
    { \
      rst_section(global_test_result ": " $$0); \
      while ((rc = (getline line < ($$0 ".log"))) != 0) \
      { \
        if (rc < 0) \
          fatal("failed to read from " $$0 ".log"); \
        print line; \
      }; \
      printf "\n"; \
    }; \
  close ($$0 ".trs"); \
  close ($$0 ".log"); \
}'
# Restructured Text title.
am__rst_title = { sed 's/.*/   &   /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
# Solaris 10 'make', and several other traditional 'make' implementations,
# pass "-e" to $(SHELL), and POSIX 2008 even requires this.  Work around it
# by disabling -e (using the XSI extension "set +e") if it's set.
am__sh_e_setup = case $$- in *e*) set +e;; esac
# Default flags passed to test drivers.
am__common_driver_flags = \
  --color-tests "$$am__color_tests" \
  --enable-hard-errors "$$am__enable_hard_errors" \
  --expect-failure "$$am__expect_failure"
# To be inserted before the command running the test.  Creates the
# directory for the log if needed.  Stores in $dir the directory
# containing $f, in $tst the test, in $log the log.  Executes the
# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
# passes TESTS_ENVIRONMENT.  Set up options for the wrapper that
# will run the test scripts (or their associated LOG_COMPILER, if
# thy have one).
am__check_pre = \
$(am__sh_e_setup);					\
$(am__vpath_adj_setup) $(am__vpath_adj)			\
$(am__tty_colors);					\
srcdir=$(srcdir); export srcdir;			\
case "$@" in						\
  */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;;	\
    *) am__odir=.;; 					\
esac;							\
test "x$$am__odir" = x"." || test -d "$$am__odir" 	\
  || $(MKDIR_P) "$$am__odir" || exit $$?;		\
if test -f "./$$f"; then dir=./;			\
elif test -f "$$f"; then dir=;				\
else dir="$(srcdir)/"; fi;				\
tst=$$dir$$f; log='$@'; 				\
if test -n '$(DISABLE_HARD_ERRORS)'; then		\
  am__enable_hard_errors=no; 				\
else							\
  am__enable_hard_errors=yes; 				\
fi; 							\
case " $(XFAIL_TESTS) " in				\
  *[\ \	]$$f[\ \	]* | *[\ \	]$$dir$$f[\ \	]*) \
    am__expect_failure=yes;;				\
  *)							\
    am__expect_failure=no;;				\
esac; 							\
$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
# A shell command to get the names of the tests scripts with any registered
# extension removed (i.e., equivalently, the names of the test logs, with
# the '.log' extension removed).  The result is saved in the shell variable
# '$bases'.  This honors runtime overriding of TESTS and TEST_LOGS.  Sadly,
# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
# since that might cause problem with VPATH rewrites for suffix-less tests.
# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
am__set_TESTS_bases = \
  bases='$(TEST_LOGS)'; \
  bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
  bases=`echo $$bases`
RECHECK_LOGS = $(TEST_LOGS)
@DBUS_ENABLE_MODULAR_TESTS_TRUE@am__EXEEXT_10 = $(am__EXEEXT_4)
TEST_SUITE_LOG = test-suite.log
LOG_COMPILE = $(LOG_COMPILER) $(AM_LOG_FLAGS) $(LOG_FLAGS)
am__set_b = \
  case '$@' in \
    */*) \
      case '$*' in \
        */*) b='$*';; \
          *) b=`echo '$@' | sed 's/\.log$$//'`; \
       esac;; \
    *) \
      b='$*';; \
  esac
am__test_logs1 = $(TESTS:=.log)
am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
TEST_LOGS = $(am__test_logs2:.sh.log=.log)
SH_LOG_COMPILE = $(SH_LOG_COMPILER) $(AM_SH_LOG_FLAGS) $(SH_LOG_FLAGS)
am__DIST_COMMON = $(srcdir)/Makefile.in \
	$(top_srcdir)/build-aux/depcomp
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
am__relativize = \
  dir0=`pwd`; \
  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
  sed_rest='s,^[^/]*/*,,'; \
  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
  sed_butlast='s,/*[^/]*$$,,'; \
  while test -n "$$dir1"; do \
    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
    if test "$$first" != "."; then \
      if test "$$first" = ".."; then \
        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
      else \
        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
        if test "$$first2" = "$$first"; then \
          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
        else \
          dir2="../$$dir2"; \
        fi; \
        dir0="$$dir0"/"$$first"; \
      fi; \
    fi; \
    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
  done; \
  reldir="$$dir2"
ACLOCAL = @ACLOCAL@
ADT_LIBS = @ADT_LIBS@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
APPARMOR_CFLAGS = @APPARMOR_CFLAGS@
APPARMOR_LIBS = @APPARMOR_LIBS@
AR = @AR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
BUILD_FILEVERSION = @BUILD_FILEVERSION@
BUILD_TIMESTAMP = @BUILD_TIMESTAMP@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CFLAG_VISIBILITY = @CFLAG_VISIBILITY@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CXX = @CXX@
CXXCPP = @CXXCPP@
CXXDEPMODE = @CXXDEPMODE@
CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
DATADIR_FROM_PKGSYSCONFDIR = @DATADIR_FROM_PKGSYSCONFDIR@
DBUS_BINDIR = @DBUS_BINDIR@
DBUS_CONSOLE_AUTH_DIR = @DBUS_CONSOLE_AUTH_DIR@
DBUS_CONSOLE_OWNER_FILE = @DBUS_CONSOLE_OWNER_FILE@
DBUS_DAEMONDIR = @DBUS_DAEMONDIR@
DBUS_DATADIR = @DBUS_DATADIR@
DBUS_INT16_TYPE = @DBUS_INT16_TYPE@
DBUS_INT32_TYPE = @DBUS_INT32_TYPE@
DBUS_INT64_CONSTANT = @DBUS_INT64_CONSTANT@
DBUS_INT64_TYPE = @DBUS_INT64_TYPE@
DBUS_LIBEXECDIR = @DBUS_LIBEXECDIR@
DBUS_MAJOR_VERSION = @DBUS_MAJOR_VERSION@
DBUS_MICRO_VERSION = @DBUS_MICRO_VERSION@
DBUS_MINOR_VERSION = @DBUS_MINOR_VERSION@
DBUS_PATH_OR_ABSTRACT = @DBUS_PATH_OR_ABSTRACT@
DBUS_PREFIX = @DBUS_PREFIX@
DBUS_SESSION_BUS_CONNECT_ADDRESS = @DBUS_SESSION_BUS_CONNECT_ADDRESS@
DBUS_SESSION_BUS_LISTEN_ADDRESS = @DBUS_SESSION_BUS_LISTEN_ADDRESS@
DBUS_SESSION_CONF_MAYBE_AUTH_EXTERNAL = @DBUS_SESSION_CONF_MAYBE_AUTH_EXTERNAL@
DBUS_SESSION_SOCKET_DIR = @DBUS_SESSION_SOCKET_DIR@
DBUS_STATIC_BUILD_CPPFLAGS = @DBUS_STATIC_BUILD_CPPFLAGS@
DBUS_SYSTEM_BUS_DEFAULT_ADDRESS = @DBUS_SYSTEM_BUS_DEFAULT_ADDRESS@
DBUS_SYSTEM_PID_FILE = @DBUS_SYSTEM_PID_FILE@
DBUS_SYSTEM_SOCKET = @DBUS_SYSTEM_SOCKET@
DBUS_TEST_DATA = @DBUS_TEST_DATA@
DBUS_TEST_EXEC = @DBUS_TEST_EXEC@
DBUS_TEST_USER = @DBUS_TEST_USER@
DBUS_UINT64_CONSTANT = @DBUS_UINT64_CONSTANT@
DBUS_USER = @DBUS_USER@
DBUS_VERSION = @DBUS_VERSION@
DBUS_X_CFLAGS = @DBUS_X_CFLAGS@
DBUS_X_LIBS = @DBUS_X_LIBS@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DLLTOOL = @DLLTOOL@
DOXYGEN = @DOXYGEN@
DSYMUTIL = @DSYMUTIL@
DUCKTYPE = @DUCKTYPE@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
EXPANDED_BINDIR = @EXPANDED_BINDIR@
EXPANDED_DATADIR = @EXPANDED_DATADIR@
EXPANDED_LIBDIR = @EXPANDED_LIBDIR@
EXPANDED_LIBEXECDIR = @EXPANDED_LIBEXECDIR@
EXPANDED_LOCALSTATEDIR = @EXPANDED_LOCALSTATEDIR@
EXPANDED_PREFIX = @EXPANDED_PREFIX@
EXPANDED_SYSCONFDIR = @EXPANDED_SYSCONFDIR@
FGREP = @FGREP@
GETTEXT_PACKAGE = @GETTEXT_PACKAGE@
GLIB_CFLAGS = @GLIB_CFLAGS@
GLIB_LIBS = @GLIB_LIBS@
GREP = @GREP@
HAVE_VISIBILITY = @HAVE_VISIBILITY@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LAUNCHCTL = @LAUNCHCTL@
LAUNCHD_AGENT_DIR = @LAUNCHD_AGENT_DIR@
LD = @LD@
LDFLAGS = @LDFLAGS@
LIBDBUS_LIBS = @LIBDBUS_LIBS@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
LT_AGE = @LT_AGE@
LT_CURRENT = @LT_CURRENT@
LT_REVISION = @LT_REVISION@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
MKDIR_P = @MKDIR_P@
NETWORK_libs = @NETWORK_libs@
NM = @NM@
NMEDIT = @NMEDIT@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PKG_CONFIG = @PKG_CONFIG@
PYTHON = @PYTHON@
PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@
PYTHON_PLATFORM = @PYTHON_PLATFORM@
PYTHON_PREFIX = @PYTHON_PREFIX@
PYTHON_VERSION = @PYTHON_VERSION@
RANLIB = @RANLIB@
RC = @RC@
R_DYNAMIC_LDFLAG = @R_DYNAMIC_LDFLAG@
SED = @SED@
SELINUX_LIBS = @SELINUX_LIBS@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
SOVERSION = @SOVERSION@
STRIP = @STRIP@
SYSCONFDIR_FROM_PKGDATADIR = @SYSCONFDIR_FROM_PKGDATADIR@
SYSTEMCTL = @SYSTEMCTL@
SYSTEMD_CFLAGS = @SYSTEMD_CFLAGS@
SYSTEMD_LIBS = @SYSTEMD_LIBS@
TEST_LAUNCH_HELPER_BINARY = @TEST_LAUNCH_HELPER_BINARY@
TEST_LISTEN = @TEST_LISTEN@
TEST_SOCKET_DIR = @TEST_SOCKET_DIR@
THREAD_LIBS = @THREAD_LIBS@
VALGRIND_CFLAGS = @VALGRIND_CFLAGS@
VALGRIND_LIBS = @VALGRIND_LIBS@
VERSION = @VERSION@
WINDRES = @WINDRES@
XMKMF = @XMKMF@
XMLTO = @XMLTO@
XML_CFLAGS = @XML_CFLAGS@
XML_LIBS = @XML_LIBS@
XSLTPROC = @XSLTPROC@
X_CFLAGS = @X_CFLAGS@
X_EXTRA_LIBS = @X_EXTRA_LIBS@
X_LIBS = @X_LIBS@
X_PRE_LIBS = @X_PRE_LIBS@
YELP_BUILD = @YELP_BUILD@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
dbus_daemondir = @dbus_daemondir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
pkgpyexecdir = @pkgpyexecdir@
pkgpythondir = @pkgpythondir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
pyexecdir = @pyexecdir@
pythondir = @pythondir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
systemdsystemunitdir = @systemdsystemunitdir@
systemduserunitdir = @systemduserunitdir@
target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
SUBDIRS = . name-test 
DIST_SUBDIRS = name-test
CLEANFILES = $(am__append_4) $(noinst_DATA) XDG_RUNTIME_DIR \
	installable $(NULL)
EXTRA_DIST = glib-tap-test.sh tap-test.sh.in dbus-test-runner \
	$(in_data) $(static_data)
AM_CPPFLAGS = \
	-I$(top_srcdir) \
	$(DBUS_STATIC_BUILD_CPPFLAGS) \
	-DDBUS_COMPILATION \
	$(GLIB_CFLAGS) \
	$(NULL)


# improve backtraces from test stuff
AM_LDFLAGS = @R_DYNAMIC_LDFLAG@
noinst_LTLIBRARIES = libdbus-testutils.la
libdbus_testutils_la_SOURCES = test-utils.c test-utils.h $(NULL) \
	$(am__append_1)
libdbus_testutils_la_LIBADD = \
	$(top_builddir)/dbus/libdbus-1.la \
	$(top_builddir)/dbus/libdbus-internal.la \
	$(NULL)

TEST_EXTENSIONS = .sh
LOG_DRIVER = env AM_TAP_AWK='$(AWK)' $(SHELL) $(top_srcdir)/build-aux/tap-driver.sh
LOG_COMPILER = $(srcdir)/glib-tap-test.sh
SH_LOG_DRIVER = $(LOG_DRIVER)
SH_LOG_COMPILER = $(SHELL)
@DBUS_ENABLE_EMBEDDED_TESTS_FALSE@TEST_BINARIES = 
@DBUS_ENABLE_EMBEDDED_TESTS_TRUE@TEST_BINARIES = \
@DBUS_ENABLE_EMBEDDED_TESTS_TRUE@	test-spawn \
@DBUS_ENABLE_EMBEDDED_TESTS_TRUE@	test-exit \
@DBUS_ENABLE_EMBEDDED_TESTS_TRUE@	test-names \
@DBUS_ENABLE_EMBEDDED_TESTS_TRUE@	test-segfault \
@DBUS_ENABLE_EMBEDDED_TESTS_TRUE@	test-service \
@DBUS_ENABLE_EMBEDDED_TESTS_TRUE@	test-shell-service \
@DBUS_ENABLE_EMBEDDED_TESTS_TRUE@	test-sleep-forever \
@DBUS_ENABLE_EMBEDDED_TESTS_TRUE@	$(NULL)

@DBUS_ENABLE_EMBEDDED_TESTS_TRUE@wrap_bus_tests = test-bus.sh \
@DBUS_ENABLE_EMBEDDED_TESTS_TRUE@	$(am__append_2)
@DBUS_ENABLE_EMBEDDED_TESTS_TRUE@wrap_dbus_tests = test-dbus.sh
test_service_LDADD = libdbus-testutils.la
test_names_LDADD = libdbus-testutils.la
test_shell_service_LDADD = libdbus-testutils.la
test_shell_SOURCES = shell-test.c
test_shell_LDADD = libdbus-testutils.la
test_spawn_SOURCES = spawn-test.c
test_spawn_LDADD = $(top_builddir)/dbus/libdbus-internal.la
test_printf_SOURCES = internals/printf.c
test_printf_LDADD = $(top_builddir)/dbus/libdbus-internal.la
test_refs_SOURCES = internals/refs.c
test_refs_LDADD = libdbus-testutils.la $(GLIB_LIBS)
test_syslog_SOURCES = internals/syslog.c
test_syslog_LDADD = libdbus-testutils.la $(GLIB_LIBS)
manual_dir_iter_SOURCES = manual-dir-iter.c
manual_dir_iter_LDADD = $(top_builddir)/dbus/libdbus-internal.la
manual_paths_SOURCES = manual-paths.c
manual_paths_LDADD = $(top_builddir)/dbus/libdbus-internal.la
manual_tcp_SOURCES = manual-tcp.c
manual_tcp_LDADD = $(top_builddir)/dbus/libdbus-internal.la
testexecdir = $(libexecdir)/installed-tests/dbus
testmetadir = $(datadir)/installed-tests/dbus
testmeta_DATA = $(am__append_12)
installable_tests = test-shell test-printf $(NULL) $(am__append_6) \
	$(am__append_7)
installable_manual_tests = manual-dir-iter manual-tcp $(NULL) \
	$(am__append_5) $(am__append_8)
installable_test_meta = $(installable_tests:=.test)
installable_test_meta_with_config = $(installable_tests:=_with_config.test)
installcheck_tests = $(am__append_10)
installcheck_environment = \
	export XDG_RUNTIME_DIR=@abs_top_builddir@/test/XDG_RUNTIME_DIR; \
	export DBUS_TEST_DAEMON=$(DESTDIR)$(DBUS_DAEMONDIR)/dbus-daemon$(EXEEXT); \
	export DBUS_TEST_HOMEDIR=@abs_top_builddir@/dbus; \
	export DBUS_TEST_DATADIR=$(DESTDIR)$(datadir); \
	${NULL}

AM_TESTS_ENVIRONMENT = \
	export XDG_RUNTIME_DIR=@abs_top_builddir@/test/XDG_RUNTIME_DIR; \
	export DBUS_FATAL_WARNINGS=1; \
	export DBUS_TEST_DAEMON=@abs_top_builddir@/bus/dbus-daemon$(EXEEXT); \
	export DBUS_TEST_DATA=@abs_top_builddir@/test/data; \
	export DBUS_TEST_HOMEDIR=@abs_top_builddir@/dbus; \
	$(NULL)

manual_authz_SOURCES = manual-authz.c
manual_authz_LDADD = \
    libdbus-testutils.la \
    $(GLIB_LIBS) \
    $(NULL)

test_corrupt_SOURCES = corrupt.c
test_corrupt_LDADD = \
    libdbus-testutils.la \
    $(GLIB_LIBS) \
    $(NULL)

test_loopback_SOURCES = loopback.c
test_loopback_LDADD = \
    libdbus-testutils.la \
    $(GLIB_LIBS) \
    $(NULL)

test_relay_SOURCES = relay.c
test_relay_LDADD = \
    libdbus-testutils.la \
    $(GLIB_LIBS) \
    $(NULL)

test_dbus_daemon_SOURCES = dbus-daemon.c
test_dbus_daemon_LDADD = \
    libdbus-testutils.la \
    $(GLIB_LIBS) \
    $(NULL)

test_dbus_daemon_eavesdrop_SOURCES = dbus-daemon-eavesdrop.c
test_dbus_daemon_eavesdrop_LDADD = \
    libdbus-testutils.la \
    $(GLIB_LIBS) \
    $(NULL)

@DBUS_UNIX_TRUE@test_sd_activation_SOURCES = \
@DBUS_UNIX_TRUE@    sd-activation.c \
@DBUS_UNIX_TRUE@    $(NULL)

@DBUS_UNIX_TRUE@test_sd_activation_LDADD = \
@DBUS_UNIX_TRUE@    libdbus-testutils.la \
@DBUS_UNIX_TRUE@    $(GLIB_LIBS) \
@DBUS_UNIX_TRUE@    $(NULL)

test_marshal_SOURCES = marshal.c
test_marshal_LDADD = \
    libdbus-testutils.la \
    $(GLIB_LIBS) \
    $(NULL)

test_monitor_SOURCES = \
    monitor.c \
    $(NULL)

test_monitor_LDADD = \
    libdbus-testutils.la \
    $(GLIB_LIBS) \
    $(NULL)

test_syntax_SOURCES = syntax.c
test_syntax_LDADD = \
    libdbus-testutils.la \
    $(GLIB_LIBS) \
    $(NULL)

test_uid_permissions_SOURCES = \
    uid-permissions.c \
    $(NULL)

test_uid_permissions_LDADD = \
    libdbus-testutils.la \
    $(GLIB_LIBS) \
    $(NULL)

test_fdpass_SOURCES = \
    fdpass.c \
    $(NULL)

test_fdpass_LDADD = \
    libdbus-testutils.la \
    $(GLIB_LIBS) \
    $(NULL)

in_data = \
	data/valid-config-files-system/debug-allow-all-fail.conf.in \
	data/valid-config-files-system/debug-allow-all-pass.conf.in \
	data/valid-config-files/debug-allow-all-sha1.conf.in \
	data/valid-config-files/debug-allow-all.conf.in \
	data/valid-config-files/finite-timeout.conf.in \
	data/valid-config-files/forbidding.conf.in \
	data/valid-config-files/incoming-limit.conf.in \
	data/valid-config-files/multi-user.conf.in \
	data/valid-config-files/systemd-activation.conf.in \
	data/invalid-service-files-system/org.freedesktop.DBus.TestSuiteNoExec.service.in \
	data/invalid-service-files-system/org.freedesktop.DBus.TestSuiteNoService.service.in \
	data/invalid-service-files-system/org.freedesktop.DBus.TestSuiteNoUser.service.in \
	data/valid-service-files-system/org.freedesktop.DBus.TestSuiteEchoService.service.in \
	data/valid-service-files-system/org.freedesktop.DBus.TestSuiteSegfaultService.service.in \
	data/valid-service-files-system/org.freedesktop.DBus.TestSuiteShellEchoServiceFail.service.in \
	data/valid-service-files-system/org.freedesktop.DBus.TestSuiteShellEchoServiceSuccess.service.in \
	data/valid-service-files/org.freedesktop.DBus.TestSuite.PrivServer.service.in \
	data/valid-service-files/org.freedesktop.DBus.TestSuiteEchoService.service.in \
	data/valid-service-files/org.freedesktop.DBus.TestSuiteForkingEchoService.service.in \
	data/valid-service-files/org.freedesktop.DBus.TestSuiteSegfaultService.service.in \
	data/valid-service-files/org.freedesktop.DBus.TestSuiteShellEchoServiceFail.service.in \
	data/valid-service-files/org.freedesktop.DBus.TestSuiteShellEchoServiceSuccess.service.in \
	$(NULL)

static_data = \
	name-test/tmp-session-like-system.conf \
	data/auth/anonymous-client-successful.auth-script \
	data/auth/anonymous-server-successful.auth-script \
	data/auth/cancel.auth-script \
	data/auth/client-out-of-mechanisms.auth-script \
	data/auth/external-failed.auth-script \
	data/auth/external-root.auth-script \
	data/auth/external-silly.auth-script \
	data/auth/external-successful.auth-script \
	data/auth/extra-bytes.auth-script \
	data/auth/fail-after-n-attempts.auth-script \
	data/auth/fallback.auth-script \
	data/auth/invalid-command-client.auth-script \
	data/auth/invalid-command.auth-script \
	data/auth/invalid-hex-encoding.auth-script \
	data/auth/mechanisms.auth-script \
	data/equiv-config-files/basic/basic-1.conf \
	data/equiv-config-files/basic/basic-2.conf \
	data/equiv-config-files/basic/basic.d/basic.conf \
	data/equiv-config-files/entities/basic.d/basic.conf \
	data/equiv-config-files/entities/entities-1.conf \
	data/equiv-config-files/entities/entities-2.conf \
	data/incomplete-messages/missing-body.message \
	data/invalid-config-files/badselinux-1.conf \
	data/invalid-config-files/badselinux-2.conf \
	data/invalid-config-files/circular-1.conf \
	data/invalid-config-files/circular-2.conf \
	data/invalid-config-files/circular-3.conf \
	data/invalid-config-files/not-well-formed.conf \
	data/invalid-config-files/truncated-file.conf \
	data/invalid-messages/array-of-nil.message \
	data/invalid-messages/array-with-mixed-types.message \
	data/invalid-messages/bad-boolean-array.message \
	data/invalid-messages/bad-boolean.message \
	data/invalid-messages/bad-endian.message \
	data/invalid-messages/bad-header-field-alignment.message \
	data/invalid-messages/boolean-has-no-value.message-raw \
	data/invalid-messages/local-namespace.message \
	data/invalid-messages/no-dot-in-name.message \
	data/invalid-messages/not-nul-header-padding.message \
	data/invalid-messages/overlong-name.message \
	data/invalid-messages/too-little-header-padding.message \
	data/invalid-messages/too-much-header-padding-by-far.message \
	data/invalid-messages/too-much-header-padding.message \
	data/invalid-messages/too-short-dict.message \
	data/sha-1/Readme.txt \
	data/sha-1/bit-hashes.sha1 \
	data/sha-1/bit-messages.sha1 \
	data/sha-1/byte-hashes.sha1 \
	data/sha-1/byte-messages.sha1 \
	data/systemd-activation/com.example.SystemdActivatable1.service \
	data/systemd-activation/com.example.SystemdActivatable2.service \
	data/systemd-activation/com.example.SystemdActivatable3.service \
	data/systemd-activation/org.freedesktop.systemd1.service \
	data/valid-config-files/basic.conf \
	data/valid-config-files/basic.d/basic.conf \
	data/valid-config-files/entities.conf \
	data/valid-config-files/listen-unix-runtime.conf \
	data/valid-config-files/many-rules.conf \
	data/valid-config-files-system/system.d/test.conf \
	data/valid-messages/array-of-array-of-uint32.message \
	data/valid-messages/dict-simple.message \
	data/valid-messages/dict.message \
	data/valid-messages/emptiness.message \
	data/valid-messages/lots-of-arguments.message \
	data/valid-messages/no-padding.message \
	data/valid-messages/opposite-endian.message \
	data/valid-messages/recursive-types.message \
	data/valid-messages/simplest-manual.message \
	data/valid-messages/simplest.message \
	data/valid-messages/standard-acquire-service.message \
	data/valid-messages/standard-hello.message \
	data/valid-messages/standard-list-services.message \
	data/valid-messages/standard-service-exists.message \
	data/valid-messages/unknown-header-field.message \
	$(NULL)

imported_data = \
	data/valid-config-files/session.conf \
	data/valid-config-files-system/system.conf \
	$(NULL)

noinst_DATA = $(imported_data)
all: all-recursive

.SUFFIXES:
.SUFFIXES: .c .lo .log .o .obj .sh .sh$(EXEEXT) .trs
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
	        && { if test -f $@; then exit 0; else break; fi; }; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu test/Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --gnu test/Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):

clean-noinstLTLIBRARIES:
	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
	@list='$(noinst_LTLIBRARIES)'; \
	locs=`for p in $$list; do echo $$p; done | \
	      sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \
	      sort -u`; \
	test -z "$$locs" || { \
	  echo rm -f $${locs}; \
	  rm -f $${locs}; \
	}

libdbus-testutils.la: $(libdbus_testutils_la_OBJECTS) $(libdbus_testutils_la_DEPENDENCIES) $(EXTRA_libdbus_testutils_la_DEPENDENCIES) 
	$(AM_V_CCLD)$(LINK)  $(libdbus_testutils_la_OBJECTS) $(libdbus_testutils_la_LIBADD) $(LIBS)

clean-noinstPROGRAMS:
	@list='$(noinst_PROGRAMS)'; test -n "$$list" || exit 0; \
	echo " rm -f" $$list; \
	rm -f $$list || exit $$?; \
	test -n "$(EXEEXT)" || exit 0; \
	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
	echo " rm -f" $$list; \
	rm -f $$list
install-testexecPROGRAMS: $(testexec_PROGRAMS)
	@$(NORMAL_INSTALL)
	@list='$(testexec_PROGRAMS)'; test -n "$(testexecdir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(testexecdir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(testexecdir)" || exit 1; \
	fi; \
	for p in $$list; do echo "$$p $$p"; done | \
	sed 's/$(EXEEXT)$$//' | \
	while read p p1; do if test -f $$p \
	 || test -f $$p1 \
	  ; then echo "$$p"; echo "$$p"; else :; fi; \
	done | \
	sed -e 'p;s,.*/,,;n;h' \
	    -e 's|.*|.|' \
	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
	sed 'N;N;N;s,\n, ,g' | \
	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
	    else { print "f", $$3 "/" $$4, $$1; } } \
	  END { for (d in files) print "f", d, files[d] }' | \
	while read type dir files; do \
	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
	    test -z "$$files" || { \
	    echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(testexecdir)$$dir'"; \
	    $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(testexecdir)$$dir" || exit $$?; \
	    } \
	; done

uninstall-testexecPROGRAMS:
	@$(NORMAL_UNINSTALL)
	@list='$(testexec_PROGRAMS)'; test -n "$(testexecdir)" || list=; \
	files=`for p in $$list; do echo "$$p"; done | \
	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
	      -e 's/$$/$(EXEEXT)/' \
	`; \
	test -n "$$list" || exit 0; \
	echo " ( cd '$(DESTDIR)$(testexecdir)' && rm -f" $$files ")"; \
	cd "$(DESTDIR)$(testexecdir)" && rm -f $$files

clean-testexecPROGRAMS:
	@list='$(testexec_PROGRAMS)'; test -n "$$list" || exit 0; \
	echo " rm -f" $$list; \
	rm -f $$list || exit $$?; \
	test -n "$(EXEEXT)" || exit 0; \
	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
	echo " rm -f" $$list; \
	rm -f $$list

manual-authz$(EXEEXT): $(manual_authz_OBJECTS) $(manual_authz_DEPENDENCIES) $(EXTRA_manual_authz_DEPENDENCIES) 
	@rm -f manual-authz$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(manual_authz_OBJECTS) $(manual_authz_LDADD) $(LIBS)

manual-dir-iter$(EXEEXT): $(manual_dir_iter_OBJECTS) $(manual_dir_iter_DEPENDENCIES) $(EXTRA_manual_dir_iter_DEPENDENCIES) 
	@rm -f manual-dir-iter$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(manual_dir_iter_OBJECTS) $(manual_dir_iter_LDADD) $(LIBS)

manual-paths$(EXEEXT): $(manual_paths_OBJECTS) $(manual_paths_DEPENDENCIES) $(EXTRA_manual_paths_DEPENDENCIES) 
	@rm -f manual-paths$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(manual_paths_OBJECTS) $(manual_paths_LDADD) $(LIBS)

manual-tcp$(EXEEXT): $(manual_tcp_OBJECTS) $(manual_tcp_DEPENDENCIES) $(EXTRA_manual_tcp_DEPENDENCIES) 
	@rm -f manual-tcp$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(manual_tcp_OBJECTS) $(manual_tcp_LDADD) $(LIBS)

test-corrupt$(EXEEXT): $(test_corrupt_OBJECTS) $(test_corrupt_DEPENDENCIES) $(EXTRA_test_corrupt_DEPENDENCIES) 
	@rm -f test-corrupt$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(test_corrupt_OBJECTS) $(test_corrupt_LDADD) $(LIBS)

test-dbus-daemon$(EXEEXT): $(test_dbus_daemon_OBJECTS) $(test_dbus_daemon_DEPENDENCIES) $(EXTRA_test_dbus_daemon_DEPENDENCIES) 
	@rm -f test-dbus-daemon$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(test_dbus_daemon_OBJECTS) $(test_dbus_daemon_LDADD) $(LIBS)

test-dbus-daemon-eavesdrop$(EXEEXT): $(test_dbus_daemon_eavesdrop_OBJECTS) $(test_dbus_daemon_eavesdrop_DEPENDENCIES) $(EXTRA_test_dbus_daemon_eavesdrop_DEPENDENCIES) 
	@rm -f test-dbus-daemon-eavesdrop$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(test_dbus_daemon_eavesdrop_OBJECTS) $(test_dbus_daemon_eavesdrop_LDADD) $(LIBS)

test-exit$(EXEEXT): $(test_exit_OBJECTS) $(test_exit_DEPENDENCIES) $(EXTRA_test_exit_DEPENDENCIES) 
	@rm -f test-exit$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(test_exit_OBJECTS) $(test_exit_LDADD) $(LIBS)

test-fdpass$(EXEEXT): $(test_fdpass_OBJECTS) $(test_fdpass_DEPENDENCIES) $(EXTRA_test_fdpass_DEPENDENCIES) 
	@rm -f test-fdpass$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(test_fdpass_OBJECTS) $(test_fdpass_LDADD) $(LIBS)

test-loopback$(EXEEXT): $(test_loopback_OBJECTS) $(test_loopback_DEPENDENCIES) $(EXTRA_test_loopback_DEPENDENCIES) 
	@rm -f test-loopback$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(test_loopback_OBJECTS) $(test_loopback_LDADD) $(LIBS)

test-marshal$(EXEEXT): $(test_marshal_OBJECTS) $(test_marshal_DEPENDENCIES) $(EXTRA_test_marshal_DEPENDENCIES) 
	@rm -f test-marshal$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(test_marshal_OBJECTS) $(test_marshal_LDADD) $(LIBS)

test-monitor$(EXEEXT): $(test_monitor_OBJECTS) $(test_monitor_DEPENDENCIES) $(EXTRA_test_monitor_DEPENDENCIES) 
	@rm -f test-monitor$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(test_monitor_OBJECTS) $(test_monitor_LDADD) $(LIBS)

test-names$(EXEEXT): $(test_names_OBJECTS) $(test_names_DEPENDENCIES) $(EXTRA_test_names_DEPENDENCIES) 
	@rm -f test-names$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(test_names_OBJECTS) $(test_names_LDADD) $(LIBS)
internals/$(am__dirstamp):
	@$(MKDIR_P) internals
	@: > internals/$(am__dirstamp)
internals/$(DEPDIR)/$(am__dirstamp):
	@$(MKDIR_P) internals/$(DEPDIR)
	@: > internals/$(DEPDIR)/$(am__dirstamp)
internals/printf.$(OBJEXT): internals/$(am__dirstamp) \
	internals/$(DEPDIR)/$(am__dirstamp)

test-printf$(EXEEXT): $(test_printf_OBJECTS) $(test_printf_DEPENDENCIES) $(EXTRA_test_printf_DEPENDENCIES) 
	@rm -f test-printf$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(test_printf_OBJECTS) $(test_printf_LDADD) $(LIBS)
internals/refs.$(OBJEXT): internals/$(am__dirstamp) \
	internals/$(DEPDIR)/$(am__dirstamp)

test-refs$(EXEEXT): $(test_refs_OBJECTS) $(test_refs_DEPENDENCIES) $(EXTRA_test_refs_DEPENDENCIES) 
	@rm -f test-refs$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(test_refs_OBJECTS) $(test_refs_LDADD) $(LIBS)

test-relay$(EXEEXT): $(test_relay_OBJECTS) $(test_relay_DEPENDENCIES) $(EXTRA_test_relay_DEPENDENCIES) 
	@rm -f test-relay$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(test_relay_OBJECTS) $(test_relay_LDADD) $(LIBS)

test-sd-activation$(EXEEXT): $(test_sd_activation_OBJECTS) $(test_sd_activation_DEPENDENCIES) $(EXTRA_test_sd_activation_DEPENDENCIES) 
	@rm -f test-sd-activation$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(test_sd_activation_OBJECTS) $(test_sd_activation_LDADD) $(LIBS)

test-segfault$(EXEEXT): $(test_segfault_OBJECTS) $(test_segfault_DEPENDENCIES) $(EXTRA_test_segfault_DEPENDENCIES) 
	@rm -f test-segfault$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(test_segfault_OBJECTS) $(test_segfault_LDADD) $(LIBS)

test-service$(EXEEXT): $(test_service_OBJECTS) $(test_service_DEPENDENCIES) $(EXTRA_test_service_DEPENDENCIES) 
	@rm -f test-service$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(test_service_OBJECTS) $(test_service_LDADD) $(LIBS)

test-shell$(EXEEXT): $(test_shell_OBJECTS) $(test_shell_DEPENDENCIES) $(EXTRA_test_shell_DEPENDENCIES) 
	@rm -f test-shell$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(test_shell_OBJECTS) $(test_shell_LDADD) $(LIBS)

test-shell-service$(EXEEXT): $(test_shell_service_OBJECTS) $(test_shell_service_DEPENDENCIES) $(EXTRA_test_shell_service_DEPENDENCIES) 
	@rm -f test-shell-service$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(test_shell_service_OBJECTS) $(test_shell_service_LDADD) $(LIBS)

test-sleep-forever$(EXEEXT): $(test_sleep_forever_OBJECTS) $(test_sleep_forever_DEPENDENCIES) $(EXTRA_test_sleep_forever_DEPENDENCIES) 
	@rm -f test-sleep-forever$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(test_sleep_forever_OBJECTS) $(test_sleep_forever_LDADD) $(LIBS)

test-spawn$(EXEEXT): $(test_spawn_OBJECTS) $(test_spawn_DEPENDENCIES) $(EXTRA_test_spawn_DEPENDENCIES) 
	@rm -f test-spawn$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(test_spawn_OBJECTS) $(test_spawn_LDADD) $(LIBS)

test-syntax$(EXEEXT): $(test_syntax_OBJECTS) $(test_syntax_DEPENDENCIES) $(EXTRA_test_syntax_DEPENDENCIES) 
	@rm -f test-syntax$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(test_syntax_OBJECTS) $(test_syntax_LDADD) $(LIBS)
internals/syslog.$(OBJEXT): internals/$(am__dirstamp) \
	internals/$(DEPDIR)/$(am__dirstamp)

test-syslog$(EXEEXT): $(test_syslog_OBJECTS) $(test_syslog_DEPENDENCIES) $(EXTRA_test_syslog_DEPENDENCIES) 
	@rm -f test-syslog$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(test_syslog_OBJECTS) $(test_syslog_LDADD) $(LIBS)

test-uid-permissions$(EXEEXT): $(test_uid_permissions_OBJECTS) $(test_uid_permissions_DEPENDENCIES) $(EXTRA_test_uid_permissions_DEPENDENCIES) 
	@rm -f test-uid-permissions$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(test_uid_permissions_OBJECTS) $(test_uid_permissions_LDADD) $(LIBS)

mostlyclean-compile:
	-rm -f *.$(OBJEXT)
	-rm -f internals/*.$(OBJEXT)

distclean-compile:
	-rm -f *.tab.c

@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/corrupt.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dbus-daemon-eavesdrop.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dbus-daemon.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fdpass.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/loopback.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/manual-authz.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/manual-dir-iter.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/manual-paths.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/manual-tcp.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/marshal.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/monitor.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/relay.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sd-activation.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/shell-test.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/spawn-test.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/syntax.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/test-exit.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/test-names.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/test-segfault.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/test-service.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/test-shell-service.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/test-sleep-forever.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/test-utils-glib.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/test-utils.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/uid-permissions.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@internals/$(DEPDIR)/printf.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@internals/$(DEPDIR)/refs.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@internals/$(DEPDIR)/syslog.Po@am__quote@

.c.o:
@am__fastdepCC_TRUE@	$(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`;\
@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\
@am__fastdepCC_TRUE@	$(am__mv) $$depbase.Tpo $$depbase.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<

.c.obj:
@am__fastdepCC_TRUE@	$(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.obj$$||'`;\
@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ `$(CYGPATH_W) '$<'` &&\
@am__fastdepCC_TRUE@	$(am__mv) $$depbase.Tpo $$depbase.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`

.c.lo:
@am__fastdepCC_TRUE@	$(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.lo$$||'`;\
@am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\
@am__fastdepCC_TRUE@	$(am__mv) $$depbase.Tpo $$depbase.Plo
@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $<

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs
install-testmetaDATA: $(testmeta_DATA)
	@$(NORMAL_INSTALL)
	@list='$(testmeta_DATA)'; test -n "$(testmetadir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(testmetadir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(testmetadir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(testmetadir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(testmetadir)" || exit $$?; \
	done

uninstall-testmetaDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(testmeta_DATA)'; test -n "$(testmetadir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	dir='$(DESTDIR)$(testmetadir)'; $(am__uninstall_files_from_dir)

# This directory's subdirectories are mostly independent; you can cd
# into them and run 'make' without going through this Makefile.
# To change the values of 'make' variables: instead of editing Makefiles,
# (1) if the variable is set in 'config.status', edit 'config.status'
#     (which will cause the Makefiles to be regenerated when you run 'make');
# (2) otherwise, pass the desired values on the 'make' command line.
$(am__recursive_targets):
	@fail=; \
	if $(am__make_keepgoing); then \
	  failcom='fail=yes'; \
	else \
	  failcom='exit 1'; \
	fi; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	case "$@" in \
	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
	  *) list='$(SUBDIRS)' ;; \
	esac; \
	for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

ID: $(am__tagged_files)
	$(am__define_uniq_tagged_files); mkid -fID $$unique
tags: tags-recursive
TAGS: tags

tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
	set x; \
	here=`pwd`; \
	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
	  include_option=--etags-include; \
	  empty_fix=.; \
	else \
	  include_option=--include; \
	  empty_fix=; \
	fi; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test ! -f $$subdir/TAGS || \
	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
	  fi; \
	done; \
	$(am__define_uniq_tagged_files); \
	shift; \
	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  if test $$# -gt 0; then \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      "$$@" $$unique; \
	  else \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      $$unique; \
	  fi; \
	fi
ctags: ctags-recursive

CTAGS: ctags
ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
	$(am__define_uniq_tagged_files); \
	test -z "$(CTAGS_ARGS)$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && $(am__cd) $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) "$$here"
cscopelist: cscopelist-recursive

cscopelist-am: $(am__tagged_files)
	list='$(am__tagged_files)'; \
	case "$(srcdir)" in \
	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
	  *) sdir=$(subdir)/$(srcdir) ;; \
	esac; \
	for i in $$list; do \
	  if test -f "$$i"; then \
	    echo "$(subdir)/$$i"; \
	  else \
	    echo "$$sdir/$$i"; \
	  fi; \
	done >> $(top_builddir)/cscope.files

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

# Recover from deleted '.trs' file; this should ensure that
# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
# both 'foo.log' and 'foo.trs'.  Break the recipe in two subshells
# to avoid problems with "make -n".
.log.trs:
	rm -f $< $@
	$(MAKE) $(AM_MAKEFLAGS) $<

# Leading 'am--fnord' is there to ensure the list of targets does not
# expand to empty, as could happen e.g. with make check TESTS=''.
am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
am--force-recheck:
	@:

$(TEST_SUITE_LOG): $(TEST_LOGS)
	@$(am__set_TESTS_bases); \
	am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
	redo_bases=`for i in $$bases; do \
	              am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
	            done`; \
	if test -n "$$redo_bases"; then \
	  redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
	  redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
	  if $(am__make_dryrun); then :; else \
	    rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
	  fi; \
	fi; \
	if test -n "$$am__remaking_logs"; then \
	  echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
	       "recursion detected" >&2; \
	elif test -n "$$redo_logs"; then \
	  am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
	fi; \
	if $(am__make_dryrun); then :; else \
	  st=0;  \
	  errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
	  for i in $$redo_bases; do \
	    test -f $$i.trs && test -r $$i.trs \
	      || { echo "$$errmsg $$i.trs" >&2; st=1; }; \
	    test -f $$i.log && test -r $$i.log \
	      || { echo "$$errmsg $$i.log" >&2; st=1; }; \
	  done; \
	  test $$st -eq 0 || exit 1; \
	fi
	@$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
	ws='[ 	]'; \
	results=`for b in $$bases; do echo $$b.trs; done`; \
	test -n "$$results" || results=/dev/null; \
	all=`  grep "^$$ws*:test-result:"           $$results | wc -l`; \
	pass=` grep "^$$ws*:test-result:$$ws*PASS"  $$results | wc -l`; \
	fail=` grep "^$$ws*:test-result:$$ws*FAIL"  $$results | wc -l`; \
	skip=` grep "^$$ws*:test-result:$$ws*SKIP"  $$results | wc -l`; \
	xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
	xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
	error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
	if test `expr $$fail + $$xpass + $$error` -eq 0; then \
	  success=true; \
	else \
	  success=false; \
	fi; \
	br='==================='; br=$$br$$br$$br$$br; \
	result_count () \
	{ \
	    if test x"$$1" = x"--maybe-color"; then \
	      maybe_colorize=yes; \
	    elif test x"$$1" = x"--no-color"; then \
	      maybe_colorize=no; \
	    else \
	      echo "$@: invalid 'result_count' usage" >&2; exit 4; \
	    fi; \
	    shift; \
	    desc=$$1 count=$$2; \
	    if test $$maybe_colorize = yes && test $$count -gt 0; then \
	      color_start=$$3 color_end=$$std; \
	    else \
	      color_start= color_end=; \
	    fi; \
	    echo "$${color_start}# $$desc $$count$${color_end}"; \
	}; \
	create_testsuite_report () \
	{ \
	  result_count $$1 "TOTAL:" $$all   "$$brg"; \
	  result_count $$1 "PASS: " $$pass  "$$grn"; \
	  result_count $$1 "SKIP: " $$skip  "$$blu"; \
	  result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
	  result_count $$1 "FAIL: " $$fail  "$$red"; \
	  result_count $$1 "XPASS:" $$xpass "$$red"; \
	  result_count $$1 "ERROR:" $$error "$$mgn"; \
	}; \
	{								\
	  echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" |	\
	    $(am__rst_title);						\
	  create_testsuite_report --no-color;				\
	  echo;								\
	  echo ".. contents:: :depth: 2";				\
	  echo;								\
	  for b in $$bases; do echo $$b; done				\
	    | $(am__create_global_log);					\
	} >$(TEST_SUITE_LOG).tmp || exit 1;				\
	mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG);			\
	if $$success; then						\
	  col="$$grn";							\
	 else								\
	  col="$$red";							\
	  test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG);		\
	fi;								\
	echo "$${col}$$br$${std}"; 					\
	echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}";	\
	echo "$${col}$$br$${std}"; 					\
	create_testsuite_report --maybe-color;				\
	echo "$$col$$br$$std";						\
	if $$success; then :; else					\
	  echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}";		\
	  if test -n "$(PACKAGE_BUGREPORT)"; then			\
	    echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}";	\
	  fi;								\
	  echo "$$col$$br$$std";					\
	fi;								\
	$$success || exit 1

check-TESTS:
	@list='$(RECHECK_LOGS)';           test -z "$$list" || rm -f $$list
	@list='$(RECHECK_LOGS:.log=.trs)'; test -z "$$list" || rm -f $$list
	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
	@set +e; $(am__set_TESTS_bases); \
	log_list=`for i in $$bases; do echo $$i.log; done`; \
	trs_list=`for i in $$bases; do echo $$i.trs; done`; \
	log_list=`echo $$log_list`; trs_list=`echo $$trs_list`; \
	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) TEST_LOGS="$$log_list"; \
	exit $$?;
recheck: all 
	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
	@set +e; $(am__set_TESTS_bases); \
	bases=`for i in $$bases; do echo $$i; done \
	         | $(am__list_recheck_tests)` || exit 1; \
	log_list=`for i in $$bases; do echo $$i.log; done`; \
	log_list=`echo $$log_list`; \
	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
	        am__force_recheck=am--force-recheck \
	        TEST_LOGS="$$log_list"; \
	exit $$?
test-shell.log: test-shell$(EXEEXT)
	@p='test-shell$(EXEEXT)'; \
	b='test-shell'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
test-printf.log: test-printf$(EXEEXT)
	@p='test-printf$(EXEEXT)'; \
	b='test-printf'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
test-corrupt.log: test-corrupt$(EXEEXT)
	@p='test-corrupt$(EXEEXT)'; \
	b='test-corrupt'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
test-dbus-daemon.log: test-dbus-daemon$(EXEEXT)
	@p='test-dbus-daemon$(EXEEXT)'; \
	b='test-dbus-daemon'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
test-dbus-daemon-eavesdrop.log: test-dbus-daemon-eavesdrop$(EXEEXT)
	@p='test-dbus-daemon-eavesdrop$(EXEEXT)'; \
	b='test-dbus-daemon-eavesdrop'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
test-fdpass.log: test-fdpass$(EXEEXT)
	@p='test-fdpass$(EXEEXT)'; \
	b='test-fdpass'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
test-monitor.log: test-monitor$(EXEEXT)
	@p='test-monitor$(EXEEXT)'; \
	b='test-monitor'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
test-loopback.log: test-loopback$(EXEEXT)
	@p='test-loopback$(EXEEXT)'; \
	b='test-loopback'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
test-marshal.log: test-marshal$(EXEEXT)
	@p='test-marshal$(EXEEXT)'; \
	b='test-marshal'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
test-refs.log: test-refs$(EXEEXT)
	@p='test-refs$(EXEEXT)'; \
	b='test-refs'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
test-relay.log: test-relay$(EXEEXT)
	@p='test-relay$(EXEEXT)'; \
	b='test-relay'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
test-syntax.log: test-syntax$(EXEEXT)
	@p='test-syntax$(EXEEXT)'; \
	b='test-syntax'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
test-syslog.log: test-syslog$(EXEEXT)
	@p='test-syslog$(EXEEXT)'; \
	b='test-syslog'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
test-uid-permissions.log: test-uid-permissions$(EXEEXT)
	@p='test-uid-permissions$(EXEEXT)'; \
	b='test-uid-permissions'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
test-sd-activation.log: test-sd-activation$(EXEEXT)
	@p='test-sd-activation$(EXEEXT)'; \
	b='test-sd-activation'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
.sh.log:
	@p='$<'; \
	$(am__set_b); \
	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
@am__EXEEXT_TRUE@.sh$(EXEEXT).log:
@am__EXEEXT_TRUE@	@p='$<'; \
@am__EXEEXT_TRUE@	$(am__set_b); \
@am__EXEEXT_TRUE@	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
@am__EXEEXT_TRUE@	--log-file $$b.log --trs-file $$b.trs \
@am__EXEEXT_TRUE@	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
@am__EXEEXT_TRUE@	"$$tst" $(AM_TESTS_FD_REDIRECT)

distdir: $(DISTFILES)
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d "$(distdir)/$$file"; then \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
	  else \
	    test -f "$(distdir)/$$file" \
	    || cp -p $$d/$$file "$(distdir)/$$file" \
	    || exit 1; \
	  fi; \
	done
	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    $(am__make_dryrun) \
	      || test -d "$(distdir)/$$subdir" \
	      || $(MKDIR_P) "$(distdir)/$$subdir" \
	      || exit 1; \
	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
	    $(am__relativize); \
	    new_distdir=$$reldir; \
	    dir1=$$subdir; dir2="$(top_distdir)"; \
	    $(am__relativize); \
	    new_top_distdir=$$reldir; \
	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
	    ($(am__cd) $$subdir && \
	      $(MAKE) $(AM_MAKEFLAGS) \
	        top_distdir="$$new_top_distdir" \
	        distdir="$$new_distdir" \
		am__remove_distdir=: \
		am__skip_length_check=: \
		am__skip_mode_fix=: \
	        distdir) \
	      || exit 1; \
	  fi; \
	done
check-am: all-am
	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
check: check-recursive
all-am: Makefile $(LTLIBRARIES) $(PROGRAMS) $(DATA) all-local
installdirs: installdirs-recursive
installdirs-am:
	for dir in "$(DESTDIR)$(testexecdir)" "$(DESTDIR)$(testmetadir)"; do \
	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
	done
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
	if test -z '$(STRIP)'; then \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	      install; \
	else \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
	fi
mostlyclean-generic:
	-test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
	-test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs)
	-test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)

clean-generic:
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
	-rm -f internals/$(DEPDIR)/$(am__dirstamp)
	-rm -f internals/$(am__dirstamp)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive

clean-am: clean-generic clean-libtool clean-local \
	clean-noinstLTLIBRARIES clean-noinstPROGRAMS \
	clean-testexecPROGRAMS mostlyclean-am

distclean: distclean-recursive
	-rm -rf ./$(DEPDIR) internals/$(DEPDIR)
	-rm -f Makefile
distclean-am: clean-am distclean-compile distclean-generic \
	distclean-tags

dvi: dvi-recursive

dvi-am:

html: html-recursive

html-am:

info: info-recursive

info-am:

install-data-am: install-data-local install-testmetaDATA

install-dvi: install-dvi-recursive

install-dvi-am:

install-exec-am: install-testexecPROGRAMS

install-html: install-html-recursive

install-html-am:

install-info: install-info-recursive

install-info-am:

install-man:

install-pdf: install-pdf-recursive

install-pdf-am:

install-ps: install-ps-recursive

install-ps-am:

installcheck-am: installcheck-local

maintainer-clean: maintainer-clean-recursive
	-rm -rf ./$(DEPDIR) internals/$(DEPDIR)
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-compile mostlyclean-generic \
	mostlyclean-libtool

pdf: pdf-recursive

pdf-am:

ps: ps-recursive

ps-am:

uninstall-am: uninstall-testexecPROGRAMS uninstall-testmetaDATA

.MAKE: $(am__recursive_targets) check-am install-am install-strip

.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am all-local \
	check check-TESTS check-am clean clean-generic clean-libtool \
	clean-local clean-noinstLTLIBRARIES clean-noinstPROGRAMS \
	clean-testexecPROGRAMS cscopelist-am ctags ctags-am distclean \
	distclean-compile distclean-generic distclean-libtool \
	distclean-tags distdir dvi dvi-am html html-am info info-am \
	install install-am install-data install-data-am \
	install-data-local install-dvi install-dvi-am install-exec \
	install-exec-am install-html install-html-am install-info \
	install-info-am install-man install-pdf install-pdf-am \
	install-ps install-ps-am install-strip \
	install-testexecPROGRAMS install-testmetaDATA installcheck \
	installcheck-am installcheck-local installdirs installdirs-am \
	maintainer-clean maintainer-clean-generic mostlyclean \
	mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
	pdf pdf-am ps ps-am recheck tags tags-am uninstall \
	uninstall-am uninstall-testexecPROGRAMS uninstall-testmetaDATA

.PRECIOUS: Makefile


@DBUS_ENABLE_EMBEDDED_TESTS_TRUE@$(wrap_bus_tests): test-bus%.sh: ../bus/test-bus%$(EXEEXT) tap-test.sh.in Makefile
@DBUS_ENABLE_EMBEDDED_TESTS_TRUE@	sed -e 's![@]RUN[@]!$<!' \
@DBUS_ENABLE_EMBEDDED_TESTS_TRUE@		< $(srcdir)/tap-test.sh.in > $@

@DBUS_ENABLE_EMBEDDED_TESTS_TRUE@$(wrap_dbus_tests): test-dbus%.sh: ../dbus/test-dbus%$(EXEEXT) tap-test.sh.in Makefile
@DBUS_ENABLE_EMBEDDED_TESTS_TRUE@	sed -e 's![@]RUN[@]!$<!' \
@DBUS_ENABLE_EMBEDDED_TESTS_TRUE@		< $(srcdir)/tap-test.sh.in > $@

# If we're installing the tests into a DESTDIR we can't run them
# again using the installed copy, because we don't know how to
# do a portable equivalent of setting LD_LIBRARY_PATH.
installcheck-local:
	$(MAKE) check-TESTS TESTS='$$(installcheck_tests)' \
		AM_TESTS_ENVIRONMENT='$$(installcheck_environment)'
@DBUS_ENABLE_INSTALLED_TESTS_TRUE@	test -n "$(DESTDIR)" || { \
@DBUS_ENABLE_INSTALLED_TESTS_TRUE@	$(installcheck_environment) \
@DBUS_ENABLE_INSTALLED_TESTS_TRUE@		$(srcdir)/dbus-test-runner \
@DBUS_ENABLE_INSTALLED_TESTS_TRUE@		$(testexecdir) \
@DBUS_ENABLE_INSTALLED_TESTS_TRUE@		$(testexec_PROGRAMS) }

all-local: copy-config-local uninstalled-config-local
	@:

copy-config-local:
	$(AM_V_at)$(MKDIR_P) data/valid-config-files/session.d
	$(AM_V_GEN)set -e; \
	if test $(srcdir) = . || test $(srcdir) -ef .; then \
		echo '-- No need to copy test data as srcdir = builddir'; \
	else \
		for F in $(static_data); do \
			$(MKDIR_P) "$${F%/*}"; \
			rm -f "$$F"; \
			cp $(srcdir)/"$$F" "$$F"; \
		done; \
	fi

uninstalled-config-local:
	$(AM_V_GEN)set -e; \
	for F in $(in_data); do \
		$(MKDIR_P) "$${F%/*}"; \
		sed \
			-e 's,[@]DBUS_TEST_DATA[@],@abs_builddir@/data,' \
			-e 's,[@]DBUS_TEST_EXEC[@],@abs_builddir@,' \
			-e 's,[@]EXEEXT[@],$(EXEEXT),' \
			-e 's,[@]TEST_LAUNCH_HELPER_BINARY[@],@abs_top_builddir@/bus/dbus-daemon-launch-helper-test$(EXEEXT),' \
			-e 's,[@]TEST_LISTEN[@],$(TEST_LISTEN),' \
			< $(srcdir)/"$$F" > "$${F%.in}"; \
	done

installable-config-local:
@DBUS_ENABLE_INSTALLED_TESTS_TRUE@	$(AM_V_GEN)set -e; \
@DBUS_ENABLE_INSTALLED_TESTS_TRUE@	for F in $(in_data); do \
@DBUS_ENABLE_INSTALLED_TESTS_TRUE@		$(MKDIR_P) "installable/$${F%/*}"; \
@DBUS_ENABLE_INSTALLED_TESTS_TRUE@		sed \
@DBUS_ENABLE_INSTALLED_TESTS_TRUE@			-e 's,[@]DBUS_TEST_DATA[@],$(testexecdir)/data,' \
@DBUS_ENABLE_INSTALLED_TESTS_TRUE@			-e 's,[@]DBUS_TEST_EXEC[@],$(testexecdir),' \
@DBUS_ENABLE_INSTALLED_TESTS_TRUE@			-e 's,[@]EXEEXT[@],$(EXEEXT),' \
@DBUS_ENABLE_INSTALLED_TESTS_TRUE@			-e 's,[@]TEST_LAUNCH_HELPER_BINARY[@],/bin/false,' \
@DBUS_ENABLE_INSTALLED_TESTS_TRUE@			-e 's,[@]TEST_LISTEN[@],$(TEST_LISTEN),' \
@DBUS_ENABLE_INSTALLED_TESTS_TRUE@			< $(srcdir)/"$$F" > "installable/$${F%.in}"; \
@DBUS_ENABLE_INSTALLED_TESTS_TRUE@	done
@DBUS_ENABLE_INSTALLED_TESTS_FALSE@	@:

install-data-local: install-config-local
	@:

install-config-local: installable-config-local
@DBUS_ENABLE_INSTALLED_TESTS_TRUE@	$(AM_V_GEN)set -e; \
@DBUS_ENABLE_INSTALLED_TESTS_TRUE@	for F in $(static_data); do \
@DBUS_ENABLE_INSTALLED_TESTS_TRUE@		install -d "$(DESTDIR)$(testexecdir)/$${F%/*}"; \
@DBUS_ENABLE_INSTALLED_TESTS_TRUE@		install -m644 "$(srcdir)/$$F" "$(DESTDIR)$(testexecdir)/$$F"; \
@DBUS_ENABLE_INSTALLED_TESTS_TRUE@	done; \
@DBUS_ENABLE_INSTALLED_TESTS_TRUE@	for F in $(in_data); do \
@DBUS_ENABLE_INSTALLED_TESTS_TRUE@		install -d "$(DESTDIR)$(testexecdir)/$${F%/*}"; \
@DBUS_ENABLE_INSTALLED_TESTS_TRUE@		install -m644 "installable/$${F%.in}" "$(DESTDIR)$(testexecdir)/$${F%.in}"; \
@DBUS_ENABLE_INSTALLED_TESTS_TRUE@	done
@DBUS_ENABLE_INSTALLED_TESTS_TRUE@	ln -nfs $(datadir)/dbus-1/session.conf $(DESTDIR)$(testexecdir)/data/valid-config-files/session.conf
@DBUS_ENABLE_INSTALLED_TESTS_TRUE@	ln -nfs $(datadir)/dbus-1/system.conf $(DESTDIR)$(testexecdir)/data/valid-config-files-system/system.conf
@DBUS_ENABLE_INSTALLED_TESTS_FALSE@	@:

clean-local:
	$(AM_V_at)if test $(srcdir) = . || test $(srcdir) -ef .; then \
		echo '-- No need to clean test data as srcdir = builddir'; \
	else \
		rm -f $(static_data); \
		for F in $(in_data); do \
			rm -f "$${F%.in}"; \
		done; \
	fi

data/valid-config-files/session.conf: $(top_builddir)/bus/session.conf
	$(AM_V_at)$(MKDIR_P) data/valid-config-files
	$(AM_V_GEN)cp $< $@

data/valid-config-files-system/system.conf: $(top_builddir)/bus/system.conf
	$(AM_V_at)$(MKDIR_P) data/valid-config-files-system
	$(AM_V_GEN)cp $< $@

$(installable_test_meta): %.test: %$(EXEEXT) Makefile
	$(AM_V_GEN) ( \
		echo '[Test]'; \
		echo 'Type=session'; \
		echo 'Output=TAP'; \
		echo 'Exec=env $(testexecdir)/$* --tap'; \
	) > $@.tmp && mv $@.tmp $@

$(installable_test_meta_with_config): %_with_config.test: %$(EXEEXT) Makefile
	$(AM_V_GEN) ( \
		echo '[Test]'; \
		echo 'Type=session'; \
		echo 'Output=TAP'; \
		echo 'Exec=env DBUS_TEST_DATA=$(testexecdir)/data $(testexecdir)/$* --tap'; \
	) > $@.tmp && mv $@.tmp $@

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
