The information in this file is for those who wish to build an apcupsd binary 
package to run on machines other than the machine on which it was built. If you 
are building apcupsd for use on the same machine as the one you are building it 
on, you do not have to do any of this. In that case, just install dependent 
libs such as libgd and libusb binaries from Fink or MacPorts (or build from 
source) with no special treatment needed. [Note that for compatibility with the
MODBUS driver, libusb now requires a patch...see below.]

To build the most compatible apcupsd binary package possible, we must...

* Build all dependent libraries static to ensure no extra dylibs are needed on
  the taget machine
* Target a recent SDK so modern features like Notification Center will work
* Specify an older minimum version (10.5) so binary will be runnable on older
  systems (although possibly with certain capabilities disabled)
* Build for i386 (not x86_64) to ensure compatibility with 32-bit systems

Instructions:

- Make a symlink from /Developer to your Xcode Developer directory.
  This is not required, but makes the paths below much simpler.

   sudo ln -s /Applications/Xcode.app/Contents/Developer /Developer

- Apply darwin-libusb-0.1.12.patch to libusb-0.1.12. This patch fixes several
  compile errors with newer XCode versions as well as adding support for 
  timeouts on interrupt transfers, which is required by the MODBUS driver.

- Build dependent libs (libusb, libpng, libgd)
  * Tested with libusb-0.1.12, libpng-1.2.51, and gd-2.1.0

  libpng & libusb:

   CPPFLAGS="-isysroot /Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.10.sdk -mmacosx-version-min=10.5" \
     LDFLAGS="-Wl,-syslibroot,/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.10.sdk -mmacosx-version-min=10.5 -arch i386" \
     CFLAGS="-arch i386" CXXFLAGS="-arch i386" \
     ./configure \
     --disable-shared \
     --disable-dependency-tracking
   make
   sudo make install

  libgd (depends on libpng, so build/install that first):

   CPPFLAGS="-isysroot /Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.10.sdk -mmacosx-version-min=10.5" \
     LDFLAGS="-Wl,-syslibroot,/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.10.sdk -mmacosx-version-min=10.5 -arch i386" \
     CFLAGS="-arch i386" CXXFLAGS="-arch i386" \
     ./configure \
     --disable-shared --disable-dependency-tracking \
     --without-fontconfig --without-freetype --without-x \
     --with-png=/usr/local
   make
   sudo make install

- Build apcupsd

   CPPFLAGS="-isysroot /Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.10.sdk -mmacosx-version-min=10.5" \
     LDFLAGS="-L/usr/local/lib -Wl,-syslibroot,/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.10.sdk -mmacosx-version-min=10.5 -arch i386" \
     CFLAGS="-arch i386" CXXFLAGS="-arch i386" \
     ./configure --sbindir=/usr/local/sbin \
     --enable-usb --enable-cgi --enable-snmp --enable-modbus-usb
   make

- Build apcupsd binary package

   cd platforms/darwin
   sudo make apcupsd.pkg

The resulting binary package is found in platforms/darwin/Apcupsd-<version>.dmg